2000 LEXUS GS400 warning

± BODY ELECTRICALTROUBLESHOOTING
BE±11
2312 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) The Key related power window operations does not operate with
driver side door key cylinder.
(Master switch operation is normal.)
TROUBLESHOOTING NO.3BE±111
Power window does not operate with multi±function transmitter.
(Windows operate normally with master switch.)TROUBLESHOOTING NO.4BE±111
Window moves down without being ordered during the up opara-
tion.TROUBLESHOOTING NO.5BE±111
POWER DOOR LOCK CONTROL SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
SymptomSuspect AreaSee page
All the doors cannot be locked or unlocked.
(Power Window Control System is normal.)1. Door Lock Control Switch
2. Wire Harness
3. Body No.1 ECUBE±131
±
DI±776
Only one side door lock control does not operate.
1. Door Lock Motor
2. Wire Harness
3. Each Door ECUBE±131
±
±
Door key related function does not operate.
1. Door Key Lock and Unlock Switch
2. Wire Harness
3. Each Door ECU
4. Body No.1 ECUBE±131
±
±
DI±776
Key confinement prevention function does not operate.
1. Key Unlock Warning Switch
2. Door Courtesy Switch
3. Wire Harness
4. Each Door ECUBE±31
BE±60
±
±
Luggage compartment door opener function does not operate.
1. Luggage Compartment Door Opener Switch
2. Luggage Compartment Door Opener Motor
3. Wire Harness
4. Body No.1 ECUBE±131
BE±131
±
DI±776
THEFT DETERRENT SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
SymptomSuspect AreaSee page
The system cannot be set.
1. Indicator Light
2. Key Unlock Warning Switch
3. Door Unlock Detection Switch
4. Engine Hood Courtesy Switch
5. Luggage Compartment Door Courtesy Switch
6. Wire Harness
7. Each Door ECU
8. Body No.1 ECUBE±150
BE±31
BE±131
BE±150
BE±60
±
±
DI±776
The system cannot be canceled when the ignition switch is turned
to ON with key.
1. Key Unlock Warning Switch
2. Ignition Switch
3. RAD NO.2 Fuse
4. Wire Harness
5. Body No.1 ECUBE±31
BE±31
BE±21
±
DI±776
The system cannot be canceled when the luggage compartment
door is unlocked with key.1. Luggage Compartment Door Courtesy Switch
2. Wire Harness
3. Body No.1 ECUBE±60
±
DI±776
The system does not operate when the engine hood is opened.
1. Engine Hood Courtesy Switch
2. Wire Harness
3. Body No.1 ECUBE±150
±
DI±776

BE±12
± BODY ELECTRICALTROUBLESHOOTING
2313 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) The system does not operate when the ignition switch is turned to
ACC without using a key or transmitter.
1. Ignition Switch
2. Key Unlock Warning Switch
3. Transmitter
4. Wire Harness
5. Body No.1 ECUBE±31
BE±31
BE±157
±
DI±776
Some of the system does not operate.
(Headlight does not light up.)
1. Headlight System
2. Wire Harness
3. Body No.2 ECU
4. Body No.1 ECUBE±3
±
DI±820
DI±776
Some of the system does not operate.
(Taillight does not light up.)
1. Taillight System
2. Wire Harness
3. Body No.2 ECU
4. Body No.1 ECUBE±3
±
DI±820
DI±776
Some of the system does not operate.
(Theft Deterrent Horn or Horn does not sound.)
1. HORN Fuse
2. Theft Deterrent Horn
3. Horn
4. Horn Relay
5. Wire Harness
6. Body No.1 ECUBE±21
BE±150
BE±250
BE±250
±
DI±776
While the warning is given, the system cannot be canceled by
unlocking the door with key or transmitter.1. Door Key Lock and Unlock Switch
2. Wire Harness
3. Body No.1 ECUBE±131
±
DI±776
While the warning is given, the system cannot be canceled by
turning the ignition switch to ACC or ON with key.
1. Ignition Switch
2. Key Unlock Warning Switch
3. RAD NO.2 Fuse
4. ECU±IG Fuse
5. Wire Harness
6. Body No.2 ECU
7. Body No.1 ECUBE±31
BE±31
BE±21
BE±21
±
DI±820
DI±776
The system operates for more than 60 seconds.Body No.1 ECUDI±776
WIRELESS DOOR LOCK CONTROL SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
HINT:
Troubleshooting of the wireless door lock control system is based on the premise that the door lock
control system is operating normally. Accordingly, before troubleshooting the wireless door lock control
system, first make certain that the door lock control system is operating normally.
If the trouble still reappears even though there are no abnormalities in any of the other circuits, then
check and replace the Wireless Door Lock Control Receiver as the last step.
SymptomSuspect AreaSee page
All functions of wireless door lock control system do not operate.
1. Transmitter
2. Wireless Door Lock Control Receiver
3. Wire Harness
4. Body No.1 ECUBE±157
BE±157
±
DI±776
Wireless door lock operates, but the buzzer does not sound.
(The buzzer does not sound when the customize function prohib-
its.)1. Wireless Door Lock Buzzer
2. Wireless Door Lock Control Receiver
3. Wire HarnessBE±157
BE±157
±

BE±14
± BODY ELECTRICALTROUBLESHOOTING
2315 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
w/o Driving Position Memory System:
SymptomSuspect AreaSee page
Mirror does not operate.
1. Mirror Switch
2. Wire Harness
3. Body No.2 ECU
4. Driver and Passenger Door ECUBE±176
±
DI±820
DI±856
DI±889
Mirror operates abnormally.
1. Mirror Switch
2. Mirror Motor
3. Wire Harness
4. Body No.2 ECU
5. Driver and Passenger Door ECUBE±176
BE±176
±
DI±820
DI±856
DI±889
ELECTRO CHROMIC MIRROR SYSTEM
SymptomSuspect AreaSee page
Electro Chromic Inner Mirror does not operate.
1. ECU±IG Fuse
2. Electro Chromic Inner Mirror
3. Wire HarnessBE±21
BE±182
±
Electro Chromic Outer Mirror does not operate.
1. ECU±IG Fuse
2. Electro Chromic Outer Mirror
3. Electro Chromic Inner Mirror
4. Wire HarnessBE±21
BE±182
BE±182
±
SEAT HEATER SYSTEM
SymptomSuspect AreaSee page
Seat heaters do not operate.
(Driver's and Passenger's)
1. SEAT HTR Fuse
2. Seat Heater Switch (D, P)
3. Wire Harness
4. Seat HeaterBE±21
BE±185
±
BE±185
Driver's seat heater does not operate.1. Seat Heater Switch (D, P)
2. Wire HarnessBE±185
±
Passenger's seat heater does not operate.1. Seat Heater Switch (D, P)
2. Wire HarnessBE±185
±
Seat heater temperature is too hot.Seat HeaterBE±185
FUEL LID OPENER SYSTEM
SymptomSuspect AreaSee page
Fuel lid opener system does not operate.
1. FUEL OPN Fuse
2. Fuel Lid Opener Switch
3. Fuel Lid Opener Motor
4. Wire HarnessBE±21
BE±188
BE±188
±
AUDIO SYSTEM
SymptomSuspect AreaSee page
Audio system abnormal operation.TROUBLESHOOTINGSBE±196
CLOCK SYSTEM
SymptomSuspect AreaSee page
Passenger seat belt warning system does not light up.TROUBLESHOOTING NO.1BE±227
Clock will not operate.TROUBLESHOOTING NO.1BE±227
Clock loses or gains time.TROUBLESHOOTING NO.2BE±227

BE01L±11
I01349
Ignition SwitchKey Unlock Warning Switch
BE±30± BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCH
2331 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
IGNITION SWITCH AND KEY UNLOCK WARNING SWITCH
LOCATION

BE0H4±04
I01256
1 2 3 4
5 6 7 8 LOCKACC
ON
START
I04031
From Back Side
± BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCHBE±31
2332 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSPECTION
1. INSPECT IGNITION SWITCH CONTINUITY
Switch positionTester connectionSpecified condition
LOCK±No continuity
ACC2 ± 3Continuity
ON2 ± 3 ± 4
6 ± 7Continuity
START1 ± 2 ± 4
6 ± 7 ± 8Continuity
If continuity is not as specified, replace the switch.
2. INSPECT IGNITION SWITCH CIRCUIT
Connect the switch connector and inspect the connector on
wire harness side from the back side, as shown.
Tester connectionConditionSpecified condition
2 ± GroundConstantBattery positive voltage
3 ± GroundIgnition switch ACC or ONBattery positive voltage
4 ± GroundIgnition switch ONBattery positive voltage
6 ± GroundIgnition switch ON or STARTBattery positive voltage
7 ± GroundConstantBattery positive voltage
8 ± GroundIgnition switch STARTBattery positive voltage
If circuit is not as specified, inspect the circuits connected to oth-
er parts.

I04265
I01663
1 2 OFF
ON
3 4
I04032
Wire Harness Side BE±32
± BODY ELECTRICALIGNITION SWITCH AND KEY UNLOCK WARNING
SWITCH
2333 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
3. INSPECT IGNITION KEY ILLUMINATION OPERATION
Connect the positive (+) lead from the battery to terminal 1 and
the negative (±) lead to terminal 2, and check that the indicator
light lights up.
If operation is not as specified, replace the switch.
4. INSPECT IGNITION KEY ILLUMINATION CIRCUIT
(See page DI±843)
5. INSPECT KEY UNLOCK WARNING SWITCH CONTI-
NUITY
Switch positionTester connectionSpecified condition
OFF (Key removed)±No continuity
ON (Key set)1 ± 2Continuity
If continuity is not as specified, replace the switch.
6. INSPECT KEY UNLOCK WARNING SWITCH CIRCUIT
(See page DI±828)
Connect the switch connector and inspect the connector on
wire harness side from the back side, as shown.
Tester connectionConditionSpecified condition
1 ± GroundConstantContinuity
If circuit is not as specified, inspect the circuits connected to oth-
er parts.

BE0H0±06
I01353
Turn Signal LightsEngine Room No.1
Junction Block

TURN HAZ Fuse
Ignition Switch
Combination Switch

Turn Signal Switch
Hazard Warning Switch
Turn Signal Lights Turn Signal Lights
Driver Side Junction Block

GAUGE FuseCowl Side No.5
Junction Block

Turn Signal Flaher
± BODY ELECTRICALTURN SIGNAL AND HAZARD WARNING SYSTEM
BE±55
2356 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
TURN SIGNAL AND HAZARD WARNING SYSTEM
LOCATION
The vehicle shown in this illustration is ºGS400º.
All components of ºGS300º other than the ones used for engine are same as ºGS400º.

BE0H1±02
I04043
Right turn
Left turn
I04034
Wire Harness Side
2 BE±56
± BODY ELECTRICALTURN SIGNAL AND HAZARD WARNING SYSTEM
2357 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSPECTION
1. INSPECT TURN SIGNAL SWITCH CONTINUITY
Switch positionTester connectionSpecified condition
Left turn1 ± 2Continuity
Neutral±No continuity
Right turn2 ± 3Continuity
If continuity is not as specified, replace the switch.
2. INSPECT TURN SIGNAL SWITCH CIRCUIT
Connector disconnected:
Disconnect the connector from the combination switch and in-
spect the connector on the wire harness side, as shown.
Tester connectionConditionSpecified condition
2 ± GroundConstantContinuity
If circuit is not as specified, inspect the wire harness.