RS07Q±01
H02616
± SUPPLEMENTAL RESTRAINT SYSTEMAIRBAG SENSOR ASSEMBLY
RS±53
2284 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
computers unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)
1. REMOVE THESE PARTS:
(See page BO±91)
(a) Finish plate
(b) End Pad
(c) No.1 under cover
(d) Hood lock release lever
(e) No.1 safety pad
(f) No.2 under cover
(g) Glove compartment finish plate
(h) Glove compartment panel assembly
(i) Front ash receptacle
(j) Cluster finish panel
(k) Console box carpet
(l) Accessary socket
(m) Accessary case
(n) Lower rear console box
(o) Rear console armrest
(p) Console box register
(q) Console box
(r) No.3 console box mounting bracket
(s) No.1 console box duct
2. REMOVE AIRBAG SENSOR ASSEMBLY
(a) Disconnect the airbag sensor connectors.
NOTICE:
Remove the connectors with the sensor assembly
installed.
(b) Using a torx wrench, remove the 3 screws and airbag sen-
sor assembly.
Torx wrench: T40 (Part No.09042±00020 or locally
manufactured tool)
