2000 Citroen C5 mirror

Downloaded from www.Manualslib.com manuals search engine ENGINE
80
CHECKING AND SETTING THE VALVE TIMING
Engines : RHY - RHZ
Tools
[1]Belt tension measuring instrument : 4122-T
[2] Tension lever: (-).188.J2
[3]Engine flywheel peg: (-).188.X
[4]Belt retaining pin: (-).0188.K
[5]Camshaft pinion peg: (-).0188.M
[6]Engine flywheel lock: (-).0188.F
[7]Set of blocking plugs: (-).0188.T
[8] Crankshaft pulley extractor: (-).0188.P
Checking the setting of the valve timing.
Peg :
- The engine flywheel, using tool [3]. (From under the vehicle).
- The camshaft, using tool [5].
WARNING :On removing screws (6), (7), (9), and (5) of the timing cover, refit the
screw(5) equipped with a spacer (thickness :17 mm).
Tighten to 1,5 ± 0,1m.daN.
(The screw (5)is one of the screws fixing and sealing the water pump).
WARNING : Should it be impossible to peg the camshaft, check that the offset
between the camshaft pinion hole and the pegging hole is not more than 1 mm,
with the help of a mirror «a» and a Ø 7 mm screw.
B1BP282CB1BP1YSCB1EP152DB1EP14AC
IMPERATIVE : If pegging is impossible, restart the adjusting.
(See corresponding operation).