2000 Citroen C5 counter

Downloaded from www.Manualslib.com manuals search engine FEATURES OF MULTIPOINT INJECTION SYSTEM
Summary
1)Accelerator pedal position sensor
(2)Denox catalyser downstream oxygen sensor
(3)Denox catalyser
(4)Downstream exhaust gas temperature sensor
(5)3-function precatalyser
(6)Precatalyser upstream oxygen sensor
(7) Upstream exhaust gas temperature sensor
(8)Petrol pressure regulator
(9)Petrol high pressure pump
(10)Knock sensor
(11) EGR electrovalve
(12)Canister purge electrovalve
(13)Motorised butterfly housing
(14)Canister reservoir
(15)Fuel pump and tank assembly
(16) Fuel tank
(17)Inlet air temperature sensor
(18) Inlet air pressure sensor(19)Engine coolant temperature sensor
(20) Sparking plug
(21) Ignition coil block
(22) High pressure injector
(23) Engine oil temperature sensor
(24)Engine speed sensor
(25)Inlet camshaft dephaser electrovalve
(26) Camshaft position sensor
(27)Petrol high pressure sensor
(28) Power steering pressure sensor
(29) Aircon fluid pressure sensor
(30)Cooling fan unit
(31)ABS block
(32)Clutch pedal sensor
(33)Brake pedal sensor
(34)Air conditioning ECU
(35) Engine management ECU
(36)Built-in systems interface BSI
(37)Rev counter
(38) Coded immobiliser
(39)Vehicle cruise control
(40) Diagnostic connector
B1HP1C6P
143
INJECTION

Downloaded from www.Manualslib.com manuals search engine 147
INJECTION
FEATURES OF BOSCH ME 7.4.6 MULTIPOINT INJECTION SYSTEM
Summary
(1) Rev counter
(2)Consumption information
(3)Ignition injection test warning lamp
(4) Air conditioning ECU (according to equipment)
(5)Multifunction screen
(6)Built-in systems interface (BSI)
(7) Transponder
(8)Automatic gearbox ECU(according to equipment)
(9 Pump, fuel filter and pressure regulator assembly
(10)Battery
(11)Pressostat
(12)Engine speed sensor
(13)Camshaft position sensors (x2)
(14)Motorised butterfly housing
(15)Canister purge electrovalve
(16)Cooling fan unit
(17)Pencil type ignition coils (x2)
(18) Petrol injectors (x6)(19) Variable timing electrovalves (x2)
(20)Upstream oxygen sensors (x2)
(21) Downstream oxygen sensors (x2)
(22)Engine coolant thermal sensor
(23) Knock sensors (x2)
(24)Power steering pressure sensor
(25) Integral pressure sensor
(26)Accelerator pedal position sensor
(27)Inlet air thermal sensor
(28) Diagnostic connector
(29) Multifunction double relay
(30) Ignition injection ECU
B1HP1B2P

Downloaded from www.Manualslib.com manuals search engine 154
INJECTION
Component (diagr.) Supplier Reference Observations
Diagnostic warning lamp31Incorporated in the dashboard instrument panel.
Central diagnostic socket32In the passenger compartment.
Electronic immobiliser33
Consumption information 34Incorporated in the dashboard instrument panel.
Rev counter35Incorporated in the dashboard instrument panel.
Preheater warning lamp36Incorporated in the dashboard instrument panel.
Pre-postheating unit37NAGARES 960411P
CARTIER 735068
Preheater plugs38CHAMPION CH170
BOSCH0250202032
Cruise control switch39
Automatic gearbox ECU
40
Air conditioning compressor41SANDEN SD7V16
Additional heating by heating
42 a
elements in boiler42 b
Additional heating control
relay43
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Electrical circuit (continued)

Downloaded from www.Manualslib.com manuals search engine 158
INJECTION
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Component (diagr.) Supplier Reference Observations
88 way connector. Flash eprom type sequential
Ignition injection ECU1BOSCHEDC 15C2 injection (reprogrammable eprom). Installed in the
ECU compartment.
FIRST3 way black connector. Installed in the front RH
Inertia switch34INERTIA Type 505wheelarch, fixed on the suspension mounting.
SWITCHManual rearming in the event of the cut-out system
being activated.
Injection double relay15BITRON 240 10915 way black connector. Installed in the ECU
compartment.
Battery14VA R TAL2 – 12 volts
400 ampsEngine compartment..
Atmospheric pressure sensor13BOSCHIncorporated in the injection ECU.
Central diagnostic socket36In the passenger compartment.
Diagnostic warning lamp35Incorporated in the dashboard instrument panel.
Vehicle speed sensor10EATON On the gearbox.
Preheater warning lamp40Incorporated in the dashboard instrument panel.
Rev counter39Incorporated in the dashboard instrument panel.
Consumption information 38Incorporated in the dashboard instrument panel.
Engine speed sensor2ELECTRIFIL
Camshaft position sensor3ELECTRIFIL Airgap value : 1,2 mm.
Electrical circuit

Downloaded from www.Manualslib.com manuals search engine 163
INJECTION
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Component (diagr.) Supplier Reference Observations
88 way connector. Flash eprom type sequential
Ignition injection ECU19BOSCHEDC 15C2 injection (reprogrammable eprom). Installed in the
electronic ECUs compartment.
Injection double relay52BITRON 240 10915 way black connector. Installed in the electronic
ECUs compartment.
Battery51VA R TAL2 – 12 volts
Engine compartment.
400 amps
Atmospheric pressure sensor18BOSCHIncorporated in the injection ECU.
Central diagnostic socket50In the passenger compartment.
Diagnostic warning lamp27Incorporated in the dashboard instrument panel.
Vehicle speed sensor53EATON On the gearbox.
Preheater warning lamp26Incorporated in the dashboard instrument panel.
Rev counter24Incorporated in the dashboard instrument panel.
Trip computer23Incorporated in the dashboard instrument panel.
Engine speed sensor60ELECTRIFIL
Camshaft position sensor61ELECTRIFIL Airgap value : 1,2 mm.
Preheater unit57NAGARES 960411P
CARTIER 51299011
Preheater plug62CHAMPION CH170
BERU 0100226344
Electrical circuit

Downloaded from www.Manualslib.com manuals search engine 199
RECOMMENDATIONS - PRECAUTIONS (AL 4 and 4 HP 20 AUTOMATIC GEARBOXES)
Engines : 6FZ - RFN - RHZ - XFX - 4HX
CLUTCH
GEARBOX
DRIVESHAFTS
ECU : Downloading, Configuration, Initialisation (Pedal).
Downloading. ( AL 4 and 4 HP 20 )
Updating the gearbox ECU by downloading :
- Follow the procedure using the diagnostic equipment.
The operation of downloading is used to update the automatic gearbox ECU or to adapt it to evolutions of the engine ECU.
After downloading, carry out the following :
- Note down the value in the oil usage counter present in the automatic gearbox ECU.
- Delete the fault codes.
- Again note down the value in the oil usage counter and compare it with the value previously read.
- Pedal initialisation (AL 4)
- Configuration (if needed) (AL 4)Following the diagnostic tool procedure.
- A reinitialisation of the autoadaptives (AL4 - 4 HP 20).
- A road test (AL 4 - 4 HP 20).
IMPERATIVE : Every update of the automatic gearbox ECU must
be accompanied by an update of the engine ECU.

Downloaded from www.Manualslib.com manuals search engine SPECIAL FEATURES : AIR CONDITIONING SYSTEM (R 134.a)
Drying cartridge
Tools
[1] Filling and recycling stationMULLER - ECOTECHNICS
[2]TORX adaptor70 FACOM
[3] After Sales kit(Bottle /skirt / bottle nozzle /grease / compressor oil)
Reminder : All repairs on an aircon circuit require the aircon circuit to be drained.
After carrying out the dismantling operations necessary to gain access to the condenser, proceed to clean
the area of the skirt (8) of the reservoir(6)using a cloth, then replace the dryer reservoir (6).
Removing the plastic bracket holding the reservoir (6) :
- Remove the screw (3)(Torx 20), from the bracket assembly/plastic counter-bracket (4)and (5).
- Remove the counter-bracket (5). (Rotate it round the hinge in a clockwise direction).
- Disengage the bracket from the harness(1)(Rotate it round the reservoir (6)anti-clockwise).
- Remove the bracket(5) from the reservoir body (6).
Unscrewing the reservoir (6).
- Unscrew the reservoir(6)using the tool[2].
C5HP16ECAIR
CONDITIONING
247