2000 Citroen C5 clutch

Downloaded from www.Manualslib.com manuals search engine 184
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
Identification.
Identification.
(a)Marking zone
(Sequence and serial no.).
(b)Location of identification label.
B2CP3CMC

Downloaded from www.Manualslib.com manuals search engine 185
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
Identification (continued)
(1) Primary shaft.
(2)Clutch bearing guide.
(3) Clutch housing
(4)Gearbox casing.
(5)Oil channel
(6) Primary shaft bearing adjustment shim.
(7)Drive gear (5th)
(8)Secondary shaft.
(9) Driven gear (1st)
(10)Satellite gears.
(11)Speedometer screw.
(12)Speedometer drive.
(13)Planet gears.
(14)Differential housing
(15) Differential gearwheel.
(16)Differential bearing stop plate.
(17)1st/2nd gear synchroniser and
reverse gear driven gear.(18) Driven gear (2nd)
(19)Driven gears (3rd)
(20)3rd/4th gear synchroniser.
(21)Driven gears (4th)
(22)Driven gears (5th)
(23)5th gear synchroniser.
(24)Planet gear adjustment shim.
Tightening torques m.daN.
(25) Clutch bearing guide2 ± 0,2
(26) Secondary shaft nut17 ± 1,5
(27) Differential screw7,5 ± 0,5
B2CP3CNP

Downloaded from www.Manualslib.com manuals search engine 186
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
Identification (continued)
B2CP3CPD
Tightening torques m.daN.
(28) Reverse lamp switch2,5 ± 0,2
(29) Gearbox casing /clutch housing fixing screws2 ± 0,2
(30)Differential bearing stop plate screws2 ± 0,2
(31)Gearbox rear casing screws2 ± 0,2
(32) Drain plug3 ± 0,3
(33) Filling / top-up plug3 ± 0,3
(34)M8 screw (Differential housing fixing)2 ± 0,2
(35) M10 screw (Differential housing fixing)4 ± 0,5
(36)Selector guide screw4 ± 0,5

Downloaded from www.Manualslib.com manuals search engine 187
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
Recommendations - Precautions
B2CP3CUC
(1)Drain plug.
(2) Filler and top-up plug.
Oil quality.
- See chapter on lubricants: page 19.
Oil quantity.
- After draining= 1.8 litres

Downloaded from www.Manualslib.com manuals search engine 188
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
B2CP3CQD
[1] Gear lever positioning tool 8605-T.
(1) Gear engagement ball-joint Ø 10 mm.
(2) Gear control lever
(3) Gear engagement control cable.
(4) Gear selection control cable.
(5) Gear selection ball-joint Ø 10 mm.

Downloaded from www.Manualslib.com manuals search engine 189
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
Gear selection control cable. Gear engagement control cable.
B2CP3CRDB2CP3CSD
Left hand drive Right hand drive Left hand drive Right hand drive
Length A 750 ± 3 mm Length C 771 ± 3 mm
Length B 1012 ± 7.5 mm Length D 1094 ± 7.5 mm
Note : See adjustment page 190.

Downloaded from www.Manualslib.com manuals search engine 190
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX SPECIFICATION
Engines : XFX – RHZ – 4HX
B2CP3CTDB2CP3BYC
Adjustments.
WARNING : Control cables should be adjusted each time the gearbox is
removed or cables changed.
WARNING : Do not use oil to detach the ball-joints.
To release the ball-joint, press at the centre«a»then pull the ball-joint upwards.
Ball-joints alone can be changed by removing the unlocking key with the aid of two
thin screwdrivers, unclip at «b».

Downloaded from www.Manualslib.com manuals search engine 191
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX CONTROLS
Engines : XFX – RHZ – 4HX
Tools.
[1]Tool for positioning the gearbox control lever8605-T Tool kit 9040-T
Adjustments.
Cables should be adjusted each time the gearbox, gear controls or power unit are removed.
Adjustment principles :
- Lock the gear lever in neutral position, using tool [1].
- Position the gearbox in neutral.
- Anchor the ball-joints on the gearbox levers.
- Lock the cable lengths with the ball-joint locking keys.
Inside the vehicle.
- Remove the central console (See corresponding operation).
- Remove the plastic blank at(a).
- Insert tool [1]fully and rotate a quarter turn to lock the gear control lever.
- At neutral.
B2CP3E7C