2000 AUDI ALLROAD SAE 5W

VE
HICLE CARE---------------------------------------------------
Engine oil
Specification and viscosity
Yo ur engine was factory filled with an all
season high quality engine oil. If you need to
add oil between oil changes, use any high
quality petroleum- or synthetic-based oil
with correct specifications.
The following terms must appear on the oil
conta iner singly or in combination with oth­
er designations:
- API Service SJ
- ACEA A2 or ACEA A3
Engine oils are graded according to their vis­
cosity. The proper grade to be used in your
engine depends on existing climatic or sea­
sonal conditions.
The engine oil which was first put into your
engine has a viscosity grade of SAE OW--30.
You can use this oil over all temperature
ranges for normal driving. If engine oil vis­
costy grade SAE OW--30 is not available, you
can also use SAE 5W-30 or SAE 5W-40.
See your authorized Audi Dealer tor more in­
formation regarding oil for your vehicle.
234 I
B31-113C I
Engine oil identification symbol
Oils of the proper qualityforyour vehicle will
be identified with a new "starburst" sym­
bol A. The starburst symbol indicates that
the oil has been certified by the American
Petr oleum Institute (API). Another
oil identi fication symbol B could be
added to the oil container to help you select
the correct oil.
1 - The top portion indicates the oil quality
by API designations.
2 - The center portion shows the SAE oil
viscosity grade.
3- The lower portion indicates that the oil
has fuel saving capabilities.
Note
Look for one of these symbols on the
front of the oil container. and use
only oils that display these symbols.
Engine oil additives
Audi does not recommend the use of
oil additives. They may adversely af­
fect your New Vehicle Warranty.

-------------------------VEHICLE CA
RE
Therefore, the brake fluid must be
changed every 2 years.
Note
Remember that brake fluid is harm­
ful to the paint of your vehicle.
c£> Because of the problem of pro�
er disposal of brake fluid along
with the special tools required and
the necessary expertise, we recom­
mend that you have your brake fluid
changed by your authorized Audi
Dealer.
It is advisable to have the fluid changed dur­
ing a Maintenance Service. �W
ARNING
Brake failure can result from old or
inappropriate brake fluid. Observe
these precautions:
• Use only brake fluid that meets
SAE specification J 17 03 and con­
forms to Federal Motor Vehicle
Standard 116. Always check with
your authorized Audi Dealer to
make sure you are using the cor­
rect brake fluid. The correct type
of brake fluid is also found labeled
on the brake fluid reservoir.
• The brake fluid must be new.
• Brake fluid is poisonous. There­
fore, it must be stored only in the
closed original container out of
reach of children.
243

TE
CHNICAL DAT
A-------------------------
Engine data
Maximum output SAE net
Maximum torque SAE net
No. of cylinders
Displacement
Stroke
Bore Compression ratio
Fuel1l
11 For further details see "Fuel supply" on
page 225.
286 250
hp at 5800 rpm
258 ft. lbs. at 1850 rpm
6
16 3 CID (2671 cm3)
3.40 in (86,4 mm)
3.19 in (81 .0 mm)
9.3 : 1
Premium unleaded