39-74
- Remove bolt on front left of rear final drive
support.
- Remove bar from lifting appliance 2024 A and secure it to free hole
with an M10 x 85 mm bolt -2-. Use approx. 5 M12 nuts -1- as spacers.
- Secure dial gauge bracket VW 387 to the bar when it is secured in
position.
- Position dial gauge on ground circumference in driveshaft flange
(arrow) and set to zero with a preload of 1 mm.
- Turn differential via both rear wheels (left and right drive flanges) until
flange on rear final drive completes one rotation.
- Make a paint marking at point of greatest radial run-out on outside of
flange (= greatest distance from axis of rotation).
- Remove old marks on driveshaft flange.
- Install driveshaft Page 39
-71
.
Pa
ge 14 of 19 Driveshaft, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.9
