2000 AUDI A4 AHA Engine Throttle Valve Control Module Checking Workshop Manual

740 - 860 RPM
(front-wheel drive)
Throttle slightly open: "Part throt"

--- --- --- If display is NOT OK page 24
-134
, Continuation
Pa
ge 9 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

24-134

Continuation

- Switch ignition off.

- Connect VAG1598/22 test box to ECM harness
connector page 01
-67
.

- Connect multimeter US1119 (Fluke 83 or
similar) and check resistance between test box
sockets 67 and 69.


Specified value: max. 5.0
- Open throttle slowly.


Specified value: If resistance is NOT OK:

- Disconnect 8-pin harness connector for throttle valve control module -
J338-.
- Check wiring for open circuit between ECM/test box and 8-pin harness
connector.

Connector terminal 3 to ECM/test box socket 69
Connector terminal 7 to ECM/test box socket 67
Specified value: max. 1.5
Pa
ge 10 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

24-135


If wiring is OK: - Check wiring for short circuit between ECM/test box and 8-pin harness
connector.

Connector terminal 7 to ECM/test box socket 69
Specified value:
- Reconnect throttle valve control module harness connector.
- Replace throttle valve control module -J338-.
- Carry out adaptation of throttle valve control module to ECM page
24
-150
.
- Check readiness code page 01
-70
. If Diagnostic Trouble Code
(DTC) memory has been erased, or ECM was disconnected, generate
new readiness code page 01
-73
.
Pa
ge 11 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

24-136

Throttle drive and angle sensor for
throttle drive, checking


Note:
Throttle drive -G186- and angle sensor -1- for
throttle drive -G187- are located in the throttle
valve control module -J338-.

Test conditions

Throttle valve in closed throttle position; if
necessary adjust accelerator pedal cable

Repair Manual, Fuel Supply System, Repair
Group 20


Cruise control adjustment OK
Power supply for throttle valve control
module OK; checking page 24
-130


Engine coolant temperature at least 80 C
(176 F)

Automatic transmission selector lever in "P"
or "N"
Pa
ge 12 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

24-137

Checking

- Connect VAG1551 or VAG1552 scan tool and
press buttons -0- and -1- to insert "Engine
Electronics" address word 01 (with engine
running at idle) page 01
-8 .
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block"
function 08, and press -Q- button to confirm input.
Read Measurin
g Value Block
HELP
Input displa
y group number XXX

Indicated on display
- Press buttons -0-, -5- and -5- to input display group number 55 (055),
and press -Q- button to confirm input.
Read Measuring Value Block 55 1 2 3 4

Indicated on display (1-4 = display fields)
- Compare display with specified values for idle air control (display fields
1-4):
Pa
ge 13 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

24-138


Display fields

1 2 3 4
Display group 55: Idle control
Display xxx RPM x.xx g/s x.xx g/s xxxx
Indicates Engine speed RPM
(in steps of 10 RPM) Regulating value-idle mass air
flow (idle air control) Learning value-idle
mass air flow Operating
conditions
Range 0 - 2550 RPM -2.78 to +2.85 g/s -1.67 to +3.34 g/s ---
Specified
value 620 - 740 RPM
(all-wheel drive)
or
740 - 860 RPM
(front-wheel drive) -1.39 to +1.39 g/s -1.39 to +1.39 g/s 0000
(all-wheel drive)
and/or
0100
(front-wheel
drive)

If engine speed is NOT OK page
24
-141
, Continuation
If display is NOT OK page 24
-139
, Evaluation of
display group 55
Explanation
page 24
-140


If displayed values are OK:

-
Press button.
Pa
ge 14 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

- Press buttons -0- and -6- to select "End Output"
function 06, and press -Q- button to confirm
input.

- Switch ignition off.
Pa
ge 15 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2

24-139
Evaluation of display group 55 Display group:
55


Display fields:
2 3
Possible malfunction cause
Corrective action
above 1.39 g/s

Increased load because of switched-
on consumers - Switch off electrical consumers

Throttle valve mechanism sticking
Air passage in area of throttle valve
contaminated - Visually check, repair if necessary
below -1.39 g/s
Intake air leak (false air) behind
throttle valve - Check intake air system for leaks (false air) page 24
-126
- Check exhaust system Repair Manual, 2.8 Liter V6 5V
General, Engine, Repair Group 26
Pa
ge 16 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2