Page 209 of 226
'99 Rav4.U209
3. Install a new bulb and the connectorinto the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.Use a Phillips- head screwdriver.a: Front side marker light
b: Parking and front turn signal light
ÐParking, front turn signal
and front side marker lights
Page 210 of 226
'99 Rav4.U
210
ÐRear side marker lights
Use a Phillips- head screwdriver.Use a Phillips- head screwdriver.
ÐRear turn signal, stop and
tail, and back- up lights
Page 211 of 226
'99 Rav4.U211
a: Back- up light
b: Rear turn signal light
c: Stop and tail lightRemove and install the cover clips as
shown in the following illustrations.Removing cover clips
Installing cover clips
ÐHigh mounted stoplight
(hardtop)
Page 212 of 226
'99 Rav4.U
212
Use the Phillips- head screwdriver.
ÐHigh mounted stoplight
(soft- top)
Page 213 of 226
'99 Rav4.U213
ÐLicense plate lights
Page 214 of 226
Page 215 of 226