1999 LEXUS SC300 ignition

EXTERIOR EQUIPMENT
90
To tilt up the rear end of the moon roof, push the switch
on the rear side or on the front side to lower it.
To operate the moon roof, the ignition key must be in the
ºONº position. However, even if the ignition key is turned to
the ºACCº or ºLOCKº position, the moon roof can be
operated until any of the doors is opened (or for about 60
seconds).
CAUTION
To avoid serious personal injury, you must do the following.

While the vehicle is moving, always keep the head, hands
and other parts of the body of all occupants away from the
roof opening. Otherwise, you could be seriously injured if
the vehicle stops suddenly or if the vehicle is involved in an
accident.

EXTERIOR EQUIPMENT
91

Always make sure nobody places his/her head,
hands and other parts of the body in the r oof opening
before you close the roof. If someone's neck, head or
hands gets caught in the closing roof, it could result
in a serious injury. When anyone closes the roof,
first make sure it is safe to do so.

Never leave small children alone in the vehicle,
especially with the ignition key still inserted. They
could use the moon roof switches and get trapped in
the roof opening. Unattended children can become
involved in serious accidents.

Never sit on top of the vehicle around the roof
opening.

COMFORT ADJUSTMENT
106Auto mode
When the tilt and telescopic steering wheel auto mode button
on the steering column is set to the ºONº position, the current
position of the steering column becomes the memorized
position.
When the ignition key is removed with the auto mode
button set to the ºONº position, the steering column
moves forward away from the driver and also tilts up for
easy exit and entry.
When the key is inserted in the ignition, the steering column
returns to the previously set position. This occurs regardless
of whether the auto mode button is ON or OFF.

COMFORT ADJUSTMENT
113
INSIDE REAR VIEW MIRROR
Adjust the mirror so that you can just see the rear of your
vehicle in the mirror.
Pushing the switch changes the mode between ºAUTOº
and ºDAYº.
The indicator comes on when the ºAUTOº mode is selected.
ºDAYº mode: The mirror surface is normal.
ºAUTOº mode: If the mirror detects light from the
headlights of the vehicle behind you, the mirror surface
darkens slightly to reduce the reflected light.
When the inside rear view mirror surface changes, the outside
rear view mirror surfaces will also become darker.
When the ignition key is inserted and turned on, the inside rear
view mirror always turns on in the ºAUTOº mode. When the outside air temperature is low, it may take a little
longer for the mirror to darken in response to the detection of
headlights.

COMFORT ADJUSTMENT
129
CAUTION
The driver or front passenger too close to the steering wheel
or dashboard during airbag deployment can be killed or
seriously injured. Lexus strongly recommends that:

The driver sit as far back as possible from the steering
wheel while still maintaining control of the vehicle.

The front passenger sit as far back as possible from the
dashboard.

All vehicle occupants be properly restrained using the
available seat belts.
This indicator comes on when the ignition key is turned to
the ºACCº or ºONº position. It goes off after about 6
seconds. This means the SRS airbags are operating
properly.
The SRS airbag warning light system monitors the airbag
sensor assembly, inflators, warning light, interconnecting
wiring and power sources. (For details, see ºService
reminder indicators and warning buzzersº on page 53 for
instructions.)

COMFORT ADJUSTMENT
141
This SRS airbag system has a service reminder indicator to
inform the driver of operating problems. If either of the
following conditions occurs, this indicates a malfunction of
the airbags. Contact your Lexus dealer as soon as possible to
service the vehicle.

The light does not come on when the ignition key is turned
to the ºACCº or ºONº position, or remains on.

The light comes on while driving.

COMFORT ADJUSTMENT
168
2. To remove the child restraint system, press the
buckle±release button and allow the belt to retract.DRIVING POSITION MEMORYSYSTEM
The micro computer can memorize the position of the driver's
seat, the positions of the tilt and telescopic steering, and
outside rear view mirrors. Two different driving position
profiles can be entered into the computer's memory.
This can only be done when the ignition key is in the ºONº
position, and the selector lever is in the ºPº position.
Setting a driving position

COMFORT ADJUSTMENT
170
When you push button º1º or º2º, the signal beeps and the
driving position automatically adjusts to the position
recorded for that button.
Conditions for memorized position activation

Ignition key ºONº
Selector lever in ºPº position
All parts of the memorized positions can be activated.
However, if the brake pedal is being depressed, the seat
position will not change.

Key not in ignition switch
Within 30 seconds of opening driver's door
The memorized position can be activated, except for the
tilt and telescopic steering. If any driving position memory switch is pushed while one of
the memorized driving position profiles is being activated,
the operation will stop.
To activate the system, push the desired button (º1º or º2º)
again.
The driving position memory control system cannot be
operated while the vehicle is moving.
If the vehicle's battery is disconnected, the computer's
memory
will be erased and the memorized positions will have
to be set again.