Page 656 of 667
ELECTRICAL
17
REPAIR
6.Identify and remove relay.
NOTE: Flasher unit shown.
Refit
7.Fit relay.
8.Position instrument pack and connect multiplugs.
9.Fit instrument pack to fascia and secure with
screws.
10.Connect battery negative lead.See this
Section.RELAY - HEATED FRONT SCREEN - FROM 02MY
Service repair no - 86.55.18
Remove
1.Remove front seat cushion.
2.Release clip and remove compartment cover.
3.Locate and release relay from bracket.
4.Remove relay.
Refit
5.Fit relay.
6.Fit relay to mounting bracket.
7.Fit and secure cover.
8.Fit seat cushion.
ProCarManuals.com
Page 657 of 667
86ELECTRICAL
18
REPAIR RELAY - REAR FOG GUARD - FROM 02MY
Service repair no - 86.55.53
Remove
1.Disconnect battery negative lead.See this
Section.
2.Remove 4 screws securing instrument pack and
release pack from fascia.
3.Disconnect 2 multiplugs from warning lamp
panel.
4.Disconnect instrument pack multiplug from main
harness.
5.Remove instrument pack.
6.Remove screw securing relay bracket,
disconnect multiplug and remove relay.
Refit
7.Fit relay, connect multiplug and secure relay with
screw.
8.Position instrument pack and connect multiplugs.
9.Fit instrument pack to fascia and secure with
screws.
10.Connect battery negative lead.See this
Section.
ProCarManuals.com
Page 658 of 667
ELECTRICAL
19
REPAIR RELAY - STARTER - FROM 02MY
Service repair no - 86.60.10
Remove
1.Remove 2 screws securing fuse cover and
remove cover.
2.Identify and remove relay.
Refit
3.Fit relay.
4.Fit fuse cover and secure with screws.SWITCH - HEADLAMP LEVELLING - FROM 02MY
Service repair no - 86.65.16
Remove
1.Disconnect battery negative lead.See this
Section.
2.Remove fascia console.See CHASSIS AND
BODY, Repair.
3.Remove operating knob from light switch.
4.Remove nut securing light switch and remove
switch from console.
Refit
5.Fit light switch and secure with nut.
6.Fit operating knob to switch.
7.Fit fascia console.See CHASSIS AND BODY,
Repair.
8.Connect battery negative lead.See this
Section.
ProCarManuals.com
Page 659 of 667
86ELECTRICAL
20
REPAIR CIGAR LIGHTER - FRONT - FROM 02MY
Service repair no - 86.65.60
Remove
1.Disconnect battery negative lead.See this
Section.
2.Remove fascia console.See CHASSIS AND
BODY, Repair.
3.Release cigar lighter body and remove from
console.
Refit
4.Fit and secure cigar lighter body to console.
5.Fit fascia console.See CHASSIS AND BODY,
Repair.
6.Connect battery negative lead.See this
Section.
ProCarManuals.com
Page 664 of 667
INSTRUMENTS
3
DESCRIPTION AND OPERATION For 02MY a new fascia console has been introduced
to accommodate the additional switches for electric
windows etc.
The console comprises a plastic moulding secured to
the fascia with five screws. The new console allows
existing switches to be repositioned and has provided
the opportunity to commonise the switches with other
Land Rover models. The switches and components
located in the console are as follows:
Cigar lighter (if fitted)
Headlamp levelling control
LH and RH heated front seat switches (if fitted)
LH and RH front window lift switches
Front fog lamp switch (if fitted)
Rear fog lamp switch
Rear wash/wipe switch
Rear wiper switch
Hazard warning lamp switch
Heated rear window switch
Heated front screen switch (if fitted)
A central cut-out in the console provides for the
installation of the radio, where fitted, or a coin tray for
markets without a standard radio installation.
ProCarManuals.com
Page 666 of 667

INSTRUMENTS
1
REPAIR INSTRUMENT PACK
Service repair no - 88.30.38
Remove
1.Remove 4 screws securing instrument pack to
fascia.
2.Release instrument pack from fascia.
3.Disconnect 3 instrument pack harness to main
harness multiplugs.
4.Remove instrument pack.
5.Disconnect 4 Lucars from left and right hand
heater controls.
6.Disconnect 7 multiplugs from rear of instrument
pack.
7.Remove clamping rings from 4 gauges.
8.Remove 4 gauges from instrument pack.
9.Remove 2 Torx screws securing warning lamp
assembly to instrument pack.
10.Remove warning lamp assembly from instrument
pack.
Refit
11.Fit warning lamp assembly to instrument pack
and secure with Torx screws.
12.Fit gauges to instrument pack and secure with
clamping rings.
13.Connect multiplugs to rear of instrument pack.
14.Connect Lucars to left and right hand heater
controls.
15.Position instrument pack to fascia and connect
instrument pack harness to main harness
multiplugs.
16.Fit instrument pack to fascia and secure with
screws.
ProCarManuals.com
Page 667 of 667
88INSTRUMENTS
2
REPAIR CLOCK
Service repair no - 88.15.07
Remove
1.Remove instrument pack.See this Section.
2.Disconnect multiplug from clock.
3.Remove threaded clamping ring securing clock
and remove clock.
Refit
4.Position clock and secure to instrument pack.
5.Connect multiplug to clock.
6.Fit instrument pack.See this Section.
ProCarManuals.com