1999 DODGE RAM engine coolant


SC HED ULE D S ER VIC ES - S EVER E S ER VIC E ( G AS)

1 999 D odge P ic ku p R 1500
1997-99 MAINTENANCE
Chrysler Maintenance & Service Intervals
Gasoline Engines
Severe Service/Light Duty Trucks
DODGE; RAM PICKUP 1500: 3.9L VIN [X]
DODGE; RAM PICKUP 1500/2500: 5.2L VIN [Y]
DODGE; RAM PICKUP 1500/2500: 5.2L VIN [T]
DODGE; RAM PICKUP 1500/2500: 5.9L VIN [Z]
* READ THIS FIRST *
Before preforming maintenance on vehicle, ensure that all
cautions and warnings have been observed to prevent vehicle damage or
personal injury. See CAUTIONS & WARNINGS in MAINTENANCE INFORMATION
article in this section.
Introduction
The frequency of scheduled inspection and maintenance
services in this article are based on Severe Duty vehicle usage ONLY.
Severe Duty vehicle usage is defined as any one of the following
conditions:
* Frequent short driving less than 5 Miles (8 16 Km).
* Frequent driving in dusty conditions.
* Frequent trailer towing.
* Extensive idling.
* More than 50% of your driving is at sustained high speeds
during hot weather, above 90
F (32C).
If none of these conditions apply, this Severe service
schedule article is excessive. DO NOT USE. Instead, use the Normal
service schedule: See appropriate
SCHEDULED SERVICE - NORMAL SERVICE (GAS) article.
3,000 MILE (5,000 KM) SEVERE DUTY SERVICE
3,000 MILE (5,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Rotate Tires 


\
\
\
\
\
\
\


 Lubricate Steering Linkage 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 

\
\
\
\
\
\
\


 (1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\


LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred for use in all Dodge 

trucks. Use only API approved oil with Starburst Symbol. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


6,000 MILE (10,000 KM) SEVERE DUTY SERVICE
6,000 MILE (10,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Lubricate Steering Linkage 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\


LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred for use in all Dodge 

trucks. Use only API approved oil with Starburst Symbol. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


9,000 MILE (14,000 KM) SEVERE DUTY SERVICE
9,000 MILE (14,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 

\
\
\
\
\
\
\


 SERVICE 

\b\
\
\
\
\
\
\


 Rotate Tires 


\
\
\
\
\
\
\


 Lubricate Steering Linkage 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\


LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred for use in all Dodge 

trucks. Use only API approved oil with Starburst Symbol. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


12,000 MILE (19,000 KM) SEVERE DUTY SERVICE
12,000 MILE (19,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 


\
\
\
\
\
\
\


 Brake Linings 


\
\
\
\
\
\
\


 Engine Air Cleaner & Air Pump Filters 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Lubricate Steering Linkage 


\
\
\
\
\
\
\


 Automatic Transmission Bands 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 


\
\
\
\
\
\
\


 Automatic Transmission Fluid & Filter 


\
\
\
\
\
\
\


 Rear Axle Fluid 


\
\
\
\
\
\
\


 Front Axle Fluid (4x4) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\



LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\

\
\
\

\
\
\


Automatic  All  ATF+2 Type 7176 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  All Mopar Hypoid Lubricant 

Lubricant   SAE 80W-90 

(
2)   GL-5 Gear Lube 

\

\
\
\

\
\
\


4x4 Front  All Mopar Hypoid Lubricant 

Axle   SAE 80W-90 

 Lubricant   GL-5 Gear Lube 

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

(
2) - Axles with Limited-Slip Differentials require the use of 

a 5% Friction Modifier, such as Mopar Gear Oil Additive 

Friction Modifier. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\

\
\
\

\
\
\


Automatic  46RE: Dry Fill  1726 Pts. (812.3L) 

Transmission 
\
\
\

\
\


Fluid  47RE: Dry Fill  1733 Pts. (815.6L) 

\

\
\
\

\
\
\


Rear Axle  9-1/4: Drained  4.8 Pts. (2.3L) 

Fluid 
\
\
\

\
\


 Model 248 (2WD)  6.3 Pts. (3L) 


\
\
\

\
\


 Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8.Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Rear Axle  Model 248 (2WD)  6.3 Pts. (3L) 

Limited Slip 
\
\
\

\
\


Differential  Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8 Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Front Axle  Model 216  6.8 Pts. (3.6L) 

Lubricant 
\
\
\

\
\


 Model 248  7.6 Pts. (3.6L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


15,000 MILE (24,000 KM) SEVERE DUTY SERVICE

15,000 MILE (24,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
VERIFY 

\b\
\
\
\
\
\
\



Last Major Service Was Performed. 

\
\
\
\
\
\
\



INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Rotate Tires 


\
\
\
\
\
\
\


 Lubricate Steering Linkage 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\



LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


 Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


18,000 MILE (29,000 KM) SEVERE DUTY SERVICE
18,000 MILE (29,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
VERIFY 

\b\
\
\
\
\
\
\



Last Major Service Was Performed. 

\
\
\
\
\
\
\



INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Lubricate Steering Linkage 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\



LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

\
\
\
\
\
\
\



FLUID CAPACITIES