8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
108,000 MILE (173,000 KM) SEVERE DUTY SERVICE
108,000 MILE (173,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Air Cleaner & Air Pump Filters
\
\
\
\
\
\
\
Brake Linings
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
Automatic Transmission Bands
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter
\
\
\
\
\
\
\
Automatic Transmission Fluid & Filter
\
\
\
\
\
\
\
Transfer Case Fluid
\
\
\
\
\
\
\
Rear Axle Fluid
\
\
\
\
\
\
\
Front Axle Fluid (4x4)
\
\
\
\
\
\
\
Engine Coolant
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Differential Model 248 (4WD) 7.3 Pts. (3.4L)
\
\
\
\
\
Model 267 (2WD) 7 Pts. (3.3L)
\
\
\
\
\
Model 267 (4WD) 7.8 Pts. (3.6L)
\
\
\
\
\
Model 286 (2WD) 6.8 Pts. (3.2L)
\
\
\
\
\
Model 286 (4WD) 10.1 Pts. (4.8L)
\
\
\
\
\
\
\
Front Axle Model 216 6.8 Pts. (3.6L)
Lubricant
\
\
\
\
\
Model 248 7.6 Pts. (3.6L)
\
\
\
\
\
\
\
Transfer Case NV241 5 Pts. (2.7L)
Fluid
\
\
\
\
\
NV241 HD 6.5 Pts. (3.5L)
\
\
\
\
\
NV241 HD W/PTO 9 Pts. (4.9L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
111,000 MILE (185,000 KM) SEVERE DUTY SERVICE
111,000 MILE (185,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Rotate Tires
\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
114,000 MILE (190,000 KM) SEVERE DUTY SERVICE
114,000 MILE (190,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
117,000 MILE (185,000 KM) SEVERE DUTY SERVICE
117,000 MILE (185,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
\
\
\
\
\
\
\
INSPECT
\b\
\
\
\
\
\
\
Exhaust System
\
\
\
\
\
\
\
Brake Hoses
\
\
\
\
\
\
\
Engine Coolant Level, Hoses & Clamps
\
\
\
\
\
\
\
SERVICE
\b\
\
\
\
\
\
\
Rotate Tires
\
\
\
\
\
\
\
Lubricate Steering Linkage
\
\
\
\
\
\
\
REPLACE
\b\
\
\
\
\
\
\
Engine Oil
\
\
\
\
\
\
\
Engine Oil Filter (
1)
\
\
\
\
\
\
\
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
\
\
\
\
\
\
\
LUBRICATION SPECIFICATIONS
\
\b\
\
\
\b\
\
\
Material Condition Specification
\
\
\
\
\
\
\
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
\
\
\
\
\
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
\
\
\
\
\
\
\
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
\
\
\
\
\
\
\
Brake Fluid All DOT 3
\
\
\
\
\
\
\
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
\
\
\
\
\
\
\
(
1) - SAE 10W-30 engine oil is preferred. Use only API approved
oil with Starburst Symbol.
\
\
\
\
\
\
\
FLUID CAPACITIES
\
\b\
\
\
\b\
\
\
Item Condition Specification (1)
\
\
\
\
\
\
\
Engine Oil 5.9L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
8.0L: Drained, W/New Filter 5 Qts. (4.7L)
\
\
\
\
\
5.9L: Drained 4.5 Qts. (4.2L)
\
\
\
\
\
\
\
Engine 5.9L: Drained 20 Qts. (19L)
Coolant
\
\
\
\
\
8.0L: Drained 24 Qts. (22.7L)
\
\
\
\
\
\
\
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
\f
\
\
\
\
\
\
\
120,000 MILE (199,000 KM) SEVERE DUTY SERVICE
120,000 MILE (199,000 KM) SEVERE DUTY SERVICE\
\
\
\
\
\
\
VERIFY
\b\
\
\
\
\
\
\
Last Major Service Was Performed.
SC HED ULE D S ER VIC ES
INSPECT
Exhaust System
Brake Hoses
Engine Coolant Level, Hoses & Clamps
Engine Air Cleaner & Air Pump Filters
Brake Linings
SERVICE
Lubricate Steering Linkage
Automatic Transmission Bands
Clean EGR Passages (5.9L)
REPLACE
Engine Oil
Engine Oil Filter (
1)
Automatic Transmission Fluid & Filter
Rear Axle Fluid
Front Axle Fluid (4x4)
Spark Plugs
Ignition Cables
PCV Valve (5.9L)
EGR Valve (5.9L)
Distributor Cap & Rotor (5.9L)
(
1) 8.0L: Change oil filter at every oil change.
5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly,
replace the oil filter at every oil change.
LUBRICATION SPECIFICATIONS
Material Condition Specification
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
Brake Fluid All DOT 3
SC HED ULE D S ER VIC ES
Model 286 (4WD) 10.1 Pts. (4.8L)
Front Axle Model 216 6.8 Pts. (3.6L)
Lubricant
Model 248 7.6 Pts. (3.6L)
(
1) - Capacities are recommended or calculated levels. Always use
dipstick (if available) to measure level.
LUBRICATION SPECIFICATIONS
LUBRICATION SPECIFICATIONS TABLE
Material Condition Specification
Engine Oil Ambient Temperature Above 0 F SAE 10W-30
(
1) (-18 C) To Over 100 F (38 C)
Ambient Temperature Less Than SAE 5W-30
-20 F (-29 C) Up To 32 F (0 C)
Engine All 50/50 Mixture Of
Coolant Distilled Water &
Ethylene Glycol
Brake Fluid All DOT 3
Automatic All ATF+2 Type 7176
Transmission
Fluid
Transfer Case All ATF+2 Type 7176
Fluid Or DEXRON III ATF
Manual NV-4500: All 75W-90 Synthc. API GL4
Transmission
Fluid NV-3500: All Mopar Manual
Transmission Fluid
Steering All Mopar Multi-Mileage
Linkage Lubricant
Lubricant
Wheel Bearing All High Temperature Multi-
Grease -Purporse EP Grease
Front All Mopar Multi-Mileage
Suspension Lubricant
Ball Joints
Lubricant
Chassis All Mopar Multi-Mileage
Lubricant Lubricant
Rear Axle All Mopar Hypoid Lubricant
Lubricant SAE 80W-90
(
2) GL-5 Gear Lube
4x4 Front All Mopar Hypoid Lubricant
Axle SAE 80W-90
2.4L ........................................... 11.2 Qts. (10.6L)\
3.0L ........................................... 13.0 Qts. (12.3L)\
3.3L & 3.8L .................................... 13.2 Qts. (12.5L)\
Automatic Transaxle (Mopar ATF Plus Type 7176)
3-Speed
Drain & Refill .............................. (4) 4.0 Qts. (3.8L)
Dry Refill ...................................... 8.5 Qts. (8.0L)\
4-Speed
Drain & Refill .............................. ( 4) 4.0 Qts. (3.8L)
Dry Refill ...................................... 9.1 Qts. (8.6L)\
Overrunning Clutch
(Mopar ATF Plus Type 7176 - AWD Models) ...................... ( 5)
Power Steering Fluid ( 6) ............................ 1.7 Pts. (.8L)
Power Transfer Unit
(SAE 80W-90/API GL-5 - AWD Models) .............. 1.2 Qts. (1.14L\
)
Rear Differential
(SAE 80W-90/API GL-5 - AWD Models) ( 5) ....................... ( 7)
( 1) - Approximate quantity listed.
( 2) - Use an API energy conserving engine oil that is certified for
gasoline engines on all engines except 3.3L flex-fuel models.
On 3.3L flex-fuel models, use Mopar Flex-Fuel 5W-30 engine oil
or an equivalent that meets Chrysler Standard MS-9214. Proper
engine oil MUST BE used to prevent engine damage. The 3.3L
flex-fuel model may be referred to as Flex-Fuel Vehicle (FFV)
model and is used in all vehicles except California emission
vehicles. Flex-fuel model may be also referred to as an E85
application and may be identified by label attached to inside of
gasoline filler door.
( 3) - Quantity includes heater and coolant recovery tank. Add 2 qts.
(1.9L) if equipped with rear heater.
( 4) - Add this amount of fluid. Start engine and shift transaxle
through all gears and back to Park. Add additional fluid to
bring fluid level to 1/8" below the ADD mark on dipstick.
Recheck fluid level with transaxle at normal operating
temperature. Adjust fluid level so fluid level is within the
HOT range dipstick.
( 5) - An overrunning clutch is bolted on front of rear differential,
between torque tube for drive shaft and rear differential.
Overrunning clutch contains a separate reservoir from rear
differential. Ensure fluids are checked at appropriate
component, as different types of fluids are used. Fluid capacity
is not available from manufacturer.
( 6) - Use only Mopar power steering fluid. DO NOT use automatic
transmission fluid.
( 7) - Capacity is not available from manufacturer. Fill unit until
fluid level is even with bottom of filler plug hole.
\
\
\
\
\
\
\
FLUID CAPACITIES (DAKOTA) \
\
\
\
\
\
\
Application ( 1) Quantity
Crankcase (Includes Filter) ( 2)
2.5L ............................................. 4.5 Qts. (4.3L)\
3.9L ............................................. 4.0 Qts. (3.8L)\
5.2L & 5.9L ...................................... 5.0 Qts. (4.7L)\
Cooling System (Includes Heater)
2.5L ............................................. 9.8 Qts. (9.3L)\
3.9L ........................................... 14.0 Qts. (13.2L)\
5.2L & 5.9L .................................... 14.3 Qts. (13.5L)\
Automatic Transmission
(Mopar ATF Plus Type 7176)