1999 DODGE RAM automatic transmission

 Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\

\
\
\

\
\
\


Automatic  All  ATF+2 Type 7176 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  All Mopar Hypoid Lubricant 

Lubricant   SAE 80W-90 

(
2)   GL-5 Gear Lube 

\

\
\
\

\
\
\


4x4 Front  All Mopar Hypoid Lubricant 

Axle   SAE 80W-90 

Lubricant   GL-5 Gear Lube 

\

\
\
\

\
\
\


Wheel Bearing All High Temperature Multi-

Grease   -Purporse EP Grease 

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

(
2) - Axles with Limited-Slip Differentials require the use of 

a 5% Friction Modifier, such as Mopar Gear Oil Additive 

Friction Modifier. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\

\
\
\

\
\
\


Automatic  47RE: Dry Fill  1733 Pts. (815.6L) 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  9-1/4: Drained  4.8 Pts. (2.3L) 

Fluid 
\
\
\

\
\


 Model 248 (2WD)  6.3 Pts. (3L) 


\
\
\

\
\


 Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8.Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Rear Axle  Model 248 (2WD)  6.3 Pts. (3L) 

Limited Slip 
\
\
\

\
\


Differential  Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\



\
\
\
\
\
\
\


 Brake Linings 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Lubricate Steering Linkage 


\
\
\
\
\
\
\


 Automatic Transmission Bands 


\
\
\
\
\
\
\


 Clean EGR Passages (5.9L) 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 


\
\
\
\
\
\
\


 Automatic Transmission Fluid & Filter 


\
\
\
\
\
\
\


 Rear Axle Fluid 


\
\
\
\
\
\
\


 Front Axle Fluid (4x4) 


\
\
\
\
\
\
\


 Spark Plugs 


\
\
\
\
\
\
\


 Ignition Cables 


\
\
\
\
\
\
\


 PCV Valve (5.9L) 


\
\
\
\
\
\
\


 EGR Valve (5.9L) 


\
\
\
\
\
\
\


 Distributor Cap & Rotor (5.9L) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\



LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\

\
\
\

\
\
\


Automatic  All  ATF+2 Type 7176 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  All Mopar Hypoid Lubricant 

Lubricant   SAE 80W-90 

 (2)   GL-5 Gear Lube 

\

\
\
\

\
\
\


4x4 Front  All Mopar Hypoid Lubricant 

Axle   SAE 80W-90 

Lubricant   GL-5 Gear Lube 

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

(
2) - Axles with Limited-Slip Differentials require the use of 

a 5% Friction Modifier, such as Mopar Gear Oil Additive 

Friction Modifier. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\

\
\
\

\
\
\


Automatic  47RE: Dry Fill  1733 Pts. (815.6L) 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  9-1/4: Drained  4.8 Pts. (2.3L) 

Fluid 
\
\
\

\
\


 Model 248 (2WD)  6.3 Pts. (3L) 


\
\
\

\
\


 Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8.Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Rear Axle  Model 248 (2WD)  6.3 Pts. (3L) 

Limited Slip 
\
\
\

\
\


Differential  Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8 Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Front Axle  Model 216  6.8 Pts. (3.6L) 

Lubricant 
\
\
\

\
\


 Model 248  7.6 Pts. (3.6L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


72,000 MILE (115,000 KM) SEVERE DUTY SERVICE
72,000 MILE (115,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
VERIFY 

\b\
\
\
\
\
\
\



Last Major Service Was Performed. 

\
\
\
\
\
\
\



INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System 


\
\
\
\
\
\
\


 Brake Hoses 


\
\
\
\
\
\
\


 Engine Coolant Level, Hoses & Clamps 


\
\
\
\
\
\
\


 Front Wheel Bearings (4x2) 


\
\
\
\
\
\
\


 Brake Linings 

\
\
\
\
\
\
\



SERVICE 

\b\
\
\
\
\
\
\


 Lubricate Steering Linkage 


\
\
\
\
\
\
\


 Automatic Transmission Bands 


\
\
\
\
\
\
\


 Clean & Relubricate Crankcase Inlet Air Filter (5.9L) 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


  Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 


\
\
\
\
\
\
\


 Automatic Transmission Fluid & Filter 


\
\
\
\
\
\
\


 Transfer Case Fluid 


\
\
\
\
\
\
\


 Rear Axle Fluid 


\
\
\
\
\
\
\


 Front Axle Fluid (4x4) 


\
\
\
\
\
\
\


 Engine Air Cleaner & Air Pump Filters 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\



LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\

\
\
\

\
\
\


Automatic  All  ATF+2 Type 7176 

Transmission   

Fluid   

\

\
\
\

\
\
\


Transfer Case All  ATF+2 Type 7176 

Fluid   Or DEXRON III ATF 

\

\
\
\

\
\
\


Rear Axle  All Mopar Hypoid Lubricant 

Lubricant   SAE 80W-90 

(
2)   GL-5 Gear Lube 

\

\
\
\

\
\
\


4x4 Front  All Mopar Hypoid Lubricant 

Axle   SAE 80W-90 

Lubricant   GL-5 Gear Lube 

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

(
2) - Axles with Limited-Slip Differentials require the use of 

a 5% Friction Modifier, such as Mopar Gear Oil Additive 

Friction Modifier. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


 Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\

\
\
\

\
\
\


Automatic  47RE: Dry Fill  1733 Pts. (815.6L) 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  9-1/4: Drained  4.8 Pts. (2.3L) 

Fluid 
\
\
\

\
\


 Model 248 (2WD)  6.3 Pts. (3L) 


\
\
\

\
\


 Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8.Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Rear Axle  Model 248 (2WD)  6.3 Pts. (3L) 

Limited Slip 
\
\
\

\
\


Differential  Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8 Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Front Axle  Model 216  6.8 Pts. (3.6L) 

Lubricant 
\
\
\

\
\


 Model 248  7.6 Pts. (3.6L) 

\

\
\
\

\
\
\


Transfer Case NV241  5 Pts. (2.7L) 

Fluid 
\
\
\

\
\


 NV241 HD  6.5 Pts. (3.5L) 


\
\
\

\
\


 NV241 HD W/PTO  9 Pts. (4.9L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


75,000 MILE (120,000 KM) SEVERE DUTY SERVICE
75,000 MILE (120,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
VERIFY 

\b\
\
\
\
\
\
\



Last Major Service Was Performed. 

\
\
\
\
\
\
\


\b\
\
\
\
\
\
\


 Lubricate Steering Linkage 


\
\
\
\
\
\
\


 Automatic Transmission Bands 

\
\
\
\
\
\
\



REPLACE 

\b\
\
\
\
\
\
\


 Engine Oil 


\
\
\
\
\
\
\


 Engine Oil Filter (
1) 


\
\
\
\
\
\
\


 Automatic Transmission Fluid & Filter 


\
\
\
\
\
\
\


 Rear Axle Fluid 


\
\
\
\
\
\
\


 Front Axle Fluid (4x4) 

\
\
\
\
\
\
\


(
1)  8.0L: Change oil filter at every oil change. 

5.9L: If mileage is less than 6,000 miles (9,600 Km) Yearly, 

replace the oil filter at every oil change. 

\
\
\
\
\
\
\



LUBRICATION SPECIFICATIONS 

\
\b\
\
\
\b\
\
\



Material  Condition  Specification 

\

\
\
\

\
\
\


Engine Oil Ambient Temperature Above 0 F SAE 10W-30 

(
1)  (-18C) To Over 100F (38C)  


\
\
\

\
\


Ambient Temperature Less Than  SAE 5W-30 

-20F (-29C) Up To 32F (0C) 

\

\
\
\

\
\
\


Engine  All  50/50 Mixture Of 

Coolant   Distilled Water & 

  Ethylene Glycol 

\

\
\
\

\
\
\


Brake Fluid  All  DOT 3 

\

\
\
\

\
\
\


Steering  All  Mopar Multi-Mileage 

Linkage   Lubricant 

Lubricant   

\

\
\
\

\
\
\


Automatic  All  ATF+2 Type 7176 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  All Mopar Hypoid Lubricant 

Lubricant   SAE 80W-90 

(
2)   GL-5 Gear Lube 

\

\
\
\

\
\
\


4x4 Front  All Mopar Hypoid Lubricant 

Axle   SAE 80W-90 

Lubricant   GL-5 Gear Lube 

\

\
\
\

\
\
\


Wheel Bearing All High Temperature Multi-

Grease   -Purporse EP Grease 

\
\
\
\
\
\
\


(
1) - SAE 10W-30 engine oil is preferred. Use only API approved 

oil with Starburst Symbol. 

(
2) - Axles with Limited-Slip Differentials require the use of 

a 5% Friction Modifier, such as Mopar Gear Oil Additive 

Friction Modifier. 

\
\
\
\
\
\
\



FLUID CAPACITIES 

\
\b\
\
\
\b\
\
\



Item  Condition  Specification (1) 

\

\
\
\

\
\
\


Engine Oil  5.9L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 8.0L: Drained, W/New Filter  5 Qts. (4.7L) 


\
\
\

\
\


 5.9L: Drained  4.5 Qts. (4.2L) 

\

\
\
\

\
\
\


Engine  5.9L: Drained  20 Qts. (19L) 

Coolant 
\
\
\

\
\


 8.0L: Drained  24 Qts. (22.7L) 

\

\
\
\

\
\
\


Automatic  47RE: Dry Fill  1733 Pts. (815.6L) 

Transmission   

Fluid   

\

\
\
\

\
\
\


Rear Axle  9-1/4: Drained  4.8 Pts. (2.3L) 

Fluid 
\
\
\

\
\


 Model 248 (2WD)  6.3 Pts. (3L) 


\
\
\

\
\


 Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8.Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Rear Axle  Model 248 (2WD)  6.3 Pts. (3L) 

Limited Slip 
\
\
\

\
\


Differential  Model 248 (4WD)  7.3 Pts. (3.4L) 


\
\
\

\
\


 Model 267 (2WD)  7 Pts. (3.3L) 


\
\
\

\
\


 Model 267 (4WD)  7.8 Pts. (3.6L) 


\
\
\

\
\


 Model 286 (2WD)  6.8 Pts. (3.2L) 


\
\
\

\
\


 Model 286 (4WD)  10.1 Pts. (4.8L) 

\

\
\
\

\
\
\


Front Axle  Model 216  6.8 Pts. (3.6L) 

Lubricant 
\
\
\

\
\


 Model 248  7.6 Pts. (3.6L) 

\
\
\
\
\
\
\


(
1) - Capacities are recommended or calculated levels. Always use 

dipstick (if available) to measure level. 
\f
\
\
\
\
\
\
\


87,000 MILE (139,000 KM) SEVERE DUTY SERVICE
87,000 MILE (139,000 KM) SEVERE DUTY SERVICE
\
\
\
\
\
\
\
 
VERIFY 

\b\
\
\
\
\
\
\



Last Major Service Was Performed. 

\
\
\
\
\
\
\



INSPECT 

\b\
\
\
\
\
\
\


 Exhaust System