35-42
Operating sleeves with chamfer -A- (arrow -1-), as well as operating
sleeves with a large offset -B- (arrow -3-), are installed. Fig. 23 Installation position of operating sleeve for 5th and reverse
gear
Note the location of operating sleeve to reverse idler gear Fig. 24
.
Installation position:
Chamfer (arrow -1-) faces 4th gear.
Small stepped side (arrow -2-) faces 5th gear.
Large stepped side (arrow -3-) faces reverse gear.
Pa
ge 25 of 26 Pinion shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.3
35-43
Fig. 24 Allocation of operating sleeve to reverse idler gearA Reverse idler gear
with chamfer Both types of operating sleeves (with chamfer
or with large offset) can be installed.
B Reverse idler gear
without chamfer Only operating sleeves with large offset can be
installed. Do not install operating sleeve with
chamfer.
Fig. 25 Pressure plate variationsTransmission housing
Dimension -a-
Aluminum 14.8 or 15.3 mm
Pa
ge 26 of 26 Pinion shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.3
