1998 YAMAHA TW200 oil type

7-2
CLEANING AND STORAGE
1
2
3
4
5
6
7
8
96. Rinse the motorcycle off
immediately with clean water
and dry all surfaces with a
chamois, clean towel, or soft
absorbent cloth.
7. Dry the chain and lubricate it
to prevent rust.
8. Clean the seat with a vinyl
upholstery cleaner to keep the
cover pliable and glossy.
9. Automotive-type wax may be
applied to all painted and
chrome-plated surfaces. Avoid
combination cleaner-waxes.
Many contain abrasives which
may mar the paint or protec-
tive finish. When finished, start
the engine and let it idle for
several minutes.
EAU01107B. STORAGE
Long term storage (60 days or
more) of your motorcycle will
require some preventive proce-
dures to guard against deteriora-
tion. After thoroughly cleaning the
motorcycle, prepare for storage as
follows:
1. Fill the fuel tank with fuel and
add fuel stabilizer (if available).
2. Remove the spark plug, pour
about one tablespoon of SAE
10W30 or 20W40 motor oil in
the spark plug hole and rein-
stall the spark plug. Turn the
engine over several times
(ground spark plug lead) to
coat the cylinder wall with oil.
EW000127
w
When using the starter motor to
crank the engine, remove the
spark plug wires, and ground them
to prevent sparking.
3. Thoroughly clean and lubricate
the drive chain. (For details,
see “Drive chain lubrication”
on page 6-23.)
4. Lubricate all control cables.
5. Block up the frame to raise
both wheels off the ground.
6. Tie a plastic bag over the
exhaust pipe outlet to prevent
moisture from entering.
7. If storing in a humid or salt-air
atmosphere, coat all exposed
metal surfaces with a light film
of oil. Do not apply oil to any
rubber parts or the seat cover.
8. Remove the battery and
charge it. Store it in a dry place
and recharge it once a month.
Do not store the battery in an
excessively warm or cold place
(less than 0°C or more than
30°C.
NOTE:
Make any necessary repairs before
storing the motorcycle.
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 66

8-1
EAU01038
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
Specifications
Model TW200
Dimensions:
Overall length 2,090 mm
Overall width 815 mm
Overall height 1,115 mm
Seat height 790 mm
Wheel base 1,325 mm
Ground clearance 250 mm
Minimum turning radius 1,900 mm
Basic weight (With oil and full
fuel tank):126 kg
Engine:
Engine type Air-cooled 4-stroke, SOHC,
gasoline
Cylinder arrangement Forward inclined
single cylinder
Displacement 196 cm
3
Bore ×Stroke 67.0 ×55.7 mm
Compression ratio 9.5:1
Starting system Electric and kick starter
Lubrication system Wet sumpEngine oil:
Type:
Classification API Service “SE”, “SF” type
or equivalent
(e.g. “SF-SE”, “SF-SE-CC”,
“SF-SE-SD” etc.)
Capacity:
Periodic oil change 1.0 L
With oil filter replacement 1.1 L
Total amount 1.3 L
Air filter:Wet type element
Fuel:
Type Regular gasoline
Fuel tank capacity 7.0 L
Reserve amount 1.0 L
Carburetor:
Type / quantity Y29P-5C / 1
Manufacturer TEIKEI
–10° 0° 10° 20° 30° 40°
SAE 10W/30
SAE 10W/40
SAE 20W/40
SAE 20W/50C
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 67

8-3
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
Wheels:
Type:
Front Spoke wheel
Rear Spoke wheel
Size:
Front 18 ×2.50
Rear 14M/C ×MT4.50
Brakes:
Front:
Type Drum brake
Operation Right hand operation
Rear:
Type Drum brake
Operation Right foot operation
Suspension:
Front Telescopic fork
Rear Swingarm
(Monocross suspension)
Shock absorber:
Front Coil spring / oil damper
Rear Coil-gas spring / oil damper
Wheel travel:
Front 160 mm
Rear 150 mmElectrical:
Ignition system: C.D.I.
Charging system:
Type A.C. magneto
Standard output 12V 11A / 5,000 rpm
Battery:
Type GM7CZ-3D
Voltage, capacity 12V 7 AH
Headlight typeHalogen bulb
Bulb voltage, wattage ×quantity:
Headlight 12V 35W / 35W ×1
Stop / tail light 12V 27W / 8W ×1
Front flasher light 12V 27W / 8W ×2
Rear flasher light 12V 27W ×2
Meter light 12V 3.4W ×1
Neutral indicator light 12V 3.4W ×1
High beam indicator light 12V 3.4W ×1
Turn indicator light 12V 3.4W ×1
Fuse:
Main 15A
5FY-28199-EX (TW200) 4/16/02 5:38 PM Page 69