T100(U)
154
—After changing wheels
11. Check the air pressure of the re- placed tire.
Adjust the air pressure to the specification
designated in Part 8. If the pressure is
lower, drive slowly to the nearest service
station and fill to the correct pressure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restow all the tools, jack and flat tire securely.
Xtra-cab models–After fixing the jack, put
the tool bag over the jack and fasten the
tool bag with rubber bands shown in the
illustration.
As soon as possible after changing
wheels, tighten the wheel nuts to the
torque specified in Part 8 with a torque
wrench and have a technician repair the
flat tire.
CAUTION
Before driving, make sure all the
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal in-
jury during a collision or s udden
braking.
T100(U)205
XTRA-CAB MODELS
Two-wheel drive models
Wheel nut torque, Nm(kgf
m, ft lbf):
103 (10.5, 76)
Tire size
Tire pressure
kPa (kgf/cm 2
or bar, psi)
Wheel size
FrontRear
P215/75R15230 (2.3, 33)240 (2.4, 35)15 X 6JJP235/75R15180 (1.8, 26)200 (2.0, 29)
Four-wheel drive models
Tire size
Tire pressure
kPa (kgf/cm 2
or bar, psi)
Wheel size
FrontRear
P235/75R15180 (1.8, 26)240 (2.4, 35)15 X 6JJ
P265/70R16180 (1.8, 26)200 (2.0, 29)16 X 7JJ(J)
