1998 TOYOTA RAV4 Owners Manual

'98 Rav4.U209
ÐHeadlights
1. Open the hood. Unplug the connec-
tor while depressing the lock re-
lease.
If the connector is tight, wiggle it.2. Turn the bulb and remove it.3. Install a new bulb and the connector into the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.

'98 Rav4U
210
Use a Phillips- head screwdriver.a: Front side marker light b: Parking and front turn signal light ÐRear side marker lightsUse a Phillips- head screwdriver.
ÐParking, front turn signal and
front side merker lights

'98 Rav4.U211
Use a Phillips- head screwdriver.a: Back- up light
b: Rear turn signal light
c: Stop and tail light
ÐRear turn signal, stop and
tail, and back- up lights

'98 Rav4U
212
Remove and install the cover clips as
shown in the following illustrations.Removing cover clips
Installing cover clips
ÐHigh mounted stoplight
(hardtop)

'98 Rav4.U213
Use the Phillips- head screwdriver.
ÐLicense plate lights
ÐHigh mounted stoplight
(soft- top)

'98 Rav4U
214

'98 Rav4.U215

'98 Rav4U
216
Part 8
SPECIFICATIONS
Dimensions and weight
Engine
Fuel
Service specifications
Ti r es
Fuses