1998 TOYOTA LAND CRUISER parking brake

SA15N-04
F04386
SST
F05217
F05080
Matchmarks
SA-100
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER
2050 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REMOVAL
1. REMOVE 2 REAR WHEELS
Torque: 131 N´m (1,340 kgf´cm, 97 ft´lbf)
2. DRAIN HYPOID GEAR OIL
Torque: 49 N´m (500 kgf´cm, 36 ft´lbf)
3. DISCONNECT BRAKE LINES
(a) Using SST, disconnect the brake line and remove the clip.
SST 09023-00100
Torque: 15 N´m (150 kgf´cm, 11 ft´lbf)
(b) Employ the same manner described above to the other
side.
4. DISCONNECT PARKING BRAKE CABLES
(a) Remove the 2 clips, pin and disconnect the parking brake
cable from the bellcrank.
(b) Employ the same manner described above to the other
side.
5. REMOVE AXLE SHAFTS
(a) Remove the 4 nuts.
Torque: 123 N´m (1,250 kgf´cm, 90 ft´lbf)
(b) Pull out the axle shaft and remove the O-ring.
NOTICE:
Be careful not to damage the oil seal.
(c) Employ the same manner described above to the other
side.
6. DISCONNECT REAR PROPELLER SHAFT
(a) Place matchmarks on the propeller shaft and differential
flange.
(b) Remove the 4 nuts, bolts, washers and disconnect the
propeller shaft.
Torque: 106 N´m (1,080 kgf´cm, 78 ft´lbf)
(c) Support the propeller shaft securely.

SA15S-04
F05171
49 (500, 36)
 GasketFiller PlugPin
Clip
Clip
 Gasket
Drain Plug
49 (500, 36)
15 (150, 11)
Clip
 O-Ring
123 (1,250, 91)
 Gasket
106 (1,080, 78)
Axle Shaft (RH)
No. 1
Actuator
ProtectorDifferential
Carrier
Axle Shaft (LH)
72 (740, 53)
x10
N´m (kgf´cm, ft´lbf) : Specified torque
 Non-reusable partPropeller Shaft
15 (150, 11)
15 (150, 11)
36 (367, 27)

No. 2
Actuator
Protector
Parking Brake Cable
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER (w/ Diff. Lock)
SA-1 17
2067 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REAR DIFFERENTIAL CARRIER (w/ Diff. Lock)
COMPONENTS

SA15T-04
F05181
F04386
SST
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER (w/ Diff. Lock)
SA-1 19
2069 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REMOVAL
1. SHIFTING REAR DIFF. LOCK
(a) Turn the ignition switch to the ON position.
(b) Shift the transfer shift lever to L position.
(c) Turn the differential lock control switch to the RR position
and lock the rear differential.
HINT:
While rotating the tires, check they are in the differential lock
condition.
(d) Disconnect the cable from the negative terminal of the
battery.
2. REMOVE 2 REAR WHEELS
Torque: 131 N´m (1,340 kgf´cm, 97 ft´lbf)
3. DRAIN HYPOID GEAR OIL
Torque: 49 N´m (500 kgf´cm, 36 ft´lbf)
4. DISCONNECT BRAKE LINES
(a) Using SST, disconnect the brake line and remove the clip.
SST 09023-00100
Torque: 15 N´m (150 kgf´cm, 11 ft´lbf)
(b) Employ the same manner described above to the other
side.
5. DISCONNECT PARKING BRAKE CABLES
(a) Remove the 2 clips, pin and disconnect the parking brake
cable from the bellcrank.
(b) Employ the same manner described above to the other
side.

SA15Y-03
F05218
Pin
Clip
ClipParking Brake Cable
 Gasket
123 (1,250, 91)
Clip
 O-Ring
49 (500, 36)
Axle Shaft (RH)
Differential Carrier
 Gasket
Axle Shaft (LH)
72 (740, 53)
106 (1,080, 78)
x10
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable part Gasket
15 (150, 11)
Propeller Shaft
Filler Plug
49 (500, 36)
Drain Plug 
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER (w/ LSD)
SA-139
2089 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REAR DIFFERENTIAL CARRIER (w/ LSD)
COMPONENTS

SA15Z-04
F04386
SST
F05217
F05080
Matchmarks
- SUSPENSION AND AXLEREAR DIFFERENTIAL CARRIER (w/ LSD)
SA-141
2091 Author
: Date
:
2004 LAND CRUISER (RM1071U)
REMOVAL
1. REMOVE 2 REAR WHEELS
Torque: 131 N´m (1,340 kgf´cm, 97 ft´lbf)
2. DRAIN HYPOID GEAR OIL
Torque: 49 N´m (500 kgf´cm, 36 ft´lbf)
3. DISCONNECT BRAKE LINES
(a) Using SST, disconnect the brake line and remove the clip.
SST 09023-00100
Torque: 15 N´m (150 kgf´cm, 11 ft´lbf)
(b) Employ the same manner described above to the other
side.
4. DISCONNECT PARKING BRAKE CABLES
(a) Remove the 2 clips, pin and disconnect the parking brake
cable from the bellcrank.
(b) Employ the same manner described above to the other
side.
5. REMOVE AXLE SHAFTS
(a) Remove the 4 nuts.
Torque: 123 N´m (1,250 kgf´cm, 90 ft´lbf)
(b) Pull out the axle shaft assembly and remove the O-ring.
NOTICE:
Be careful not to damage the oil seal.
(c) Employ the same manner described above to the other
side.
6. DISCONNECT REAR PROPELLER SHAFT
(a) Place matchmarks on the propeller shaft and differential
flange.
(b) Remove the 4 nuts, bolts, washers and disconnect the
propeller shaft.
Torque: 106 N´m (1,080 kgf´cm, 78 ft´lbf)
(c) Support the propeller shaft securely.

D02869
12
4
3 5
1 4
3 5 2 1
1 2 3 4
52
3 4
5
Free " Lock
Lock " Free
D04311
Heater main relay:
1 42
5
3
1 2
3
4
5
*
*:Relay housing
metallic parts
D02663
Motor actuator side: TR-50
- TRANSFERMOTOR SHIFT CONTROL SYSTEM
1938 Author
: Date
:
2004 LAND CRUISER (RM1071U)
4. INSPECT ACTUATOR OPERATION
(a) Raise up the front wheels, place the stopper under the
rear wheels to block them, and pull up the parking brake.
(b) Disconnect the connector of the actuator and connect it
to the relay using wire.
(c) Check that the front propeller shaft can be rotated by
hand.
Inspection ItemStandard
Center Diff.
Free " LockFront propeller shaft cannot be rotated.
Center Diff.
Lock " FreeFront propeller shaft can be rotated.
HINT:
When inspecting the operation described above, use a heater
main relay.
NOTICE:
Connect the terminals being careful not to touch the neigh-
boring terminals or metallic parts of relay housing.
5. INSPECT MOTOR ACTUATOR (MOTOR)
(a) Remove the motor actuator (See page TR-8).
(b) Measure the resistance between the terminals 1 and 5.
Standard resistance: 0.3 - 100 W
(c) Measure the resistance between the terminals 1 or 5 and
body ground.
Standard resistance: More than 0.5 MW
If the resistance value is not as specified, replace the motor ac-
tuator.