4RUNNER (1998)
Adjust the driver's seat so that the
foot pedals, steering wheel and instru-
ment panel controls are within easy
reach of the driver.
CAUTION
Adjustments should not be
made while the vehicle is mov-
ing, as the seat may unexpect-
edly move and cause the driver
to lose control of the vehicle.
When adjusting the seat, be
careful not to hit the seat
against a passenger or luggage.
After adjusting the seat posi-
tion, try sliding it forward and
backward to make sure it is
locked in position.
After adjusting the seatback, ex-
ert body pressure to make sure
it is locked in position.
Do not put objects under the
seats as they may interfere with
the seat- lock mechanism or un-
expectedly push up the seat
position adjusting lever; the
seat may suddenly move, caus-
ing the driver to lose control of
the vehicle.
While adjusting the seat, do not
put your hands under the seat
or near the moving parts. You
may catch and injure your
hands or fingers.
ÐAdjusting front seats
Front seatsÐ
ÐSeat adjustment precaution
4RUNNER (1998)
BRAKES
Minimum pedal clearance when de-
pressed with the pressure of 490 N (50
kgf, 110 lbf) with the engine running,
mm (in.): 75 (2.9)
Pedal freeplay, mm (in.): 3Ð6 (0.12Ð0.24)
Pad wear limit, mm (in.): 1.0 (0.04)
Lining wear limit, mm (in.): 1.0 (0.04)
Parking brake adjustment when pulled
with the force of 196 N (20 kgf, 44 lbf): 7Ð9 clicks
Fluid type: SAE J1703 or FMVSS No. 116 DOT
3
STEERING
Wheel freeplay: Less than 30 mm (1.2 in.)
Power steering fluid type: Automatic transmission fluid DEXRON II or III Tires
Tire size
Tire pressure
kPa (kgf/cm 2
or bar, psi)
Front Rear
P265/70R16
P225/75R15 220 (2.2, 32) 220 (2.2, 32)
200 (2.0, 29) 200 (2.0, 29) Wheel size
7J
16 *
1
7JJ16 *
2
7J
15 *
1
7JJ15 *
2
* 1
: Vehicles with steel wheels
* 2
: Vehicles with aluminum wheel
Wheel nut torque, N
Vm (kgf Vm, ft Vlbf):
110 (11.5, 83)
