1998 TOYOTA 4RUNNER washer fluid

4RUNNER (1998)
1. Windshield and back window washer fluid tank
2. Engine oil filler cap
3. Brake fluid reservoir
4. Fuse block
5. Battery
6. Engine coolant reservoir
7. Power steering fluid reser- voir
8. Engine oil level dipstick
Engine compartment overview
3RZ- FE engine

4RUNNER (1998)
1. Windshield and back window
washer fluid tank
2. Power steering fluid reser- voir
3. Engine oil filler cap
4. Brake fluid reservoir
5. Fuse block
6. Battery
7. Engine coolant reservoir
8. Engine oil level dipstick

5VZ- FE engine

4RUNNER (1998)
Parts and tools
Here is a list of parts and tools you
will need on performing do- it- yourself
maintenance. Remember all Toyota
parts are designed in metric sizes, so
your tools must be metric.
Checking the engine oil level
Parts (if level is low): Engine oil API grade SH, ºEnergy-
Conserving IIº or SJ, ºEnergy-
Conservingº multigrade or ILSAC
multigrade having viscosity proper
for your climate
Tools: Rag or paper towel
Funnel (only for adding oil)
Checking the engine coolant level
Parts (if level is low): Ethylene- glycol antifreeze
Demineralized or distilled water
Tools: Funnel (only for adding coolant)
Checking brake fluid
Parts (if level is low): SAE J1703 or FMVSS No. 116
DOT 3 brake fluid
Tools: Rag or paper towel
Funnel (only for adding fluid) Checking power steering fluid
Parts (if level is low):
Automatic transmission fluid DEXRON II or III
Tools: Rag or paper towel
Funnel (only for adding fluid)
Checking battery condition
Tools: Warm water
Baking soda
Grease
Conventional wrench (for terminal
clamp bolts)
Checking and replacing fuses
Parts (if replacement is necessary): Fuse with same amperage rating
as original
Tools: Conventional wrench (for instrument
lower panel nut)
Adding washer fluid
Parts: Water
Washer fluid containing antifreeze
(for winter use)
Tools: Funnel Replacing light bulbs
Parts:
Bulb with same number and watt-
age rating as original (See charts
in ºReplacing light bulbsº in Chap-
ter 7- 3.)
Tools: Screwdriver

4RUNNER (1998)
Part 7
DO- IT- YOURSELF
MAINTENANCEÐ
Chapter 7- 3
Electrical components
Checking battery condition
Battery recharging precautions
Checking and replacing fuses
Adding washer fluid
Replacing light bulbs
CAUTION
BATTERY PRECAUTIONS
The battery produces flammable
and explosive hydrogen gas. Do not cause a spark from the
battery with tools.
Do not smoke or light a match
near the battery.
The electrolyte contains poison-
ous and corrosive sulfuric acid. Avoid contact with eyes, skin or
clothes.
Never ingest electrolyte.
Wear protective safety glasses
when working near the battery.
Keep children away from the
battery.
EMERGENCY MEASURES If electrolyte gets in your eyes,
flush your eyes with clean wa-
ter immediately and get immedi-
ate medical attention. If pos-
sible, continue to apply water
with a sponge or cloth while en
route to the medical office.
If electrolyte gets on your skin,
thoroughly wash the contact
area. If you feel pain or burn-
ing, get medical attention im-
mediately.
If electrolyte gets on your
clothes, there is a possibility of
its soaking through to your
skin, so immediately take off
the exposed clothing and follow
the procedure above, if neces-
sary.
If you happen to swallow elec-
trolyte, drink a large quantity of
water or milk. Follow with milk
of magnesia, beaten raw egg or
vegetable oil. Then go immedi-
ately for emergency help.
Checking battery c onditionÐ
ÐPrecautions

4RUNNER (1998)
If the new fuse immediately blows out,
there is a problem with the electrical
system. Have your Toyota dealer cor-
rect it as soon as possible.
CAUTION
Never use a fuse with a higher
amperage rating, or any other ob-
ject, in place of a fuse. This may
cause extensive damage and
possibly a fire.
Adding washer fluid
If any washer does not work, the
washer tank may be empty. Add
washer fluid.
You may use plain water as washer
fluid. However, in cold areas where
temperatures range below freezing
point, use washer fluid containing anti-
freeze. This product is available at
your Toyota dealer and most auto
parts stores. Follow the manufactur-
er's directions for how much to mix
with water.
NOTICE
Do not use engine antifreeze or
any other substitute because itmay damage your vehicle's paint.
Replacing light bulbsÐ
The following illustrations show how to
gain access to the bulbs. When re-
placing a bulb, make sure the ignition
switch and light switch are off. Use
bulbs with the wattage ratings given in
the table.
CAUTION
Halogen bulbs have pressurized
gas inside and require special
handling. They can burst or shat-
ter if scratched or dropped. Hold
a bulb only by its plastic or metal
case. Do not touch the glass part
of a bulb with bare hands.
NOTICE
Only use a bulb of the listed type.