1998 TOYOTA 4RUNNER cruise control

4RUNNER (1998)
1. Clutch start cancel switch
2. Headlight and turn signal
switch
3. Wiper and washer switches
4. Back window defogger switch
5. Emergency flasher switch
6. Clock
7. Cup holder
8. Air conditioning controls
9. Car audio
10. Ashtray 11. Cigarette lighter
12. Ignition switch
13. Cruise control switch
14. Rear differential lock switch
15. Instrument panel light con- trol knob
16. Power rear view mirror con- trol switch (without power
windows)
17. Power back window lock switch (without power win-
dows)

4RUNNER (1998)
*
1
: For details, see ºService reminder indicators and warning
buzzersº in Chapter 1-5.
* 2
: If this light flashes, see ºCruise controlº in Chapter 1-6.
Cruise control indicator light *
2
Driving pattern
(ºPOWERº
mode)
indicator
light
Four- wheel drive indicator light
Rear differential lock indicator light
Automatic transmission indicator light

4RUNNER (1998)
Part 1
OPERATION OF
INSTRUMENTS
AND CONTROLSÐ
Chapter 1- 6
Ignition switch,
Transmission
and Parking brake
Ignition switch with steering
lock
Automatic transmission
Manual transmission
Four- wheel drive system
Rear differential look system

P ar k ing br ak e
Cruise control
Clutch start cancel switch
Ignition switch with steering lock

4RUNNER (1998)
Lock release button
To prevent misshifting Parking, engine starting and key removal position Reverse position Neutral position Position for engine braking
With the brake pedal depressed, shift while holding the lock release button in. (The ignition switch must be in ºONºposition.) Shift while holding the lock release button in. Shifting normally Normal driving position Position for stronger engine braking than that in º2º posi- tion
Overdrive switch
For selecting either a three-speed or four-speed transmission
ºONº position(Shifting into overdrive pos-sible) ºOFFº position (Shifting into overdrive notpossible)ºO/D OFFº indicator light shows the over- drive switch is inOFF position
Driving pattern selector button For selecting a driving pattern suited to existing driving conditions
ºNORMº (Normal)mode for general driving conditioning ºPWRº (Power) mode for power- ful acceleration
ºPWRº mode indicator light on the instrument panel shows the driving pattern selector button isin the ºPWRº mode
Vehicles with cruise control ' When the cruise control is being used, even if you downshift the trans mission by turning
off the overdrive switch, engine braking will not be applied because the cruise control is not cancelled. For ways to
decrease the vehicle speed, see ºCruise controlº in this chapter. Automatic transmission
Two- wheel drive models

4RUNNER (1998)
5VZ- FE engine.....58 km/h (36
mph) Vehicles with cruise control'When the
cruise control is being used, even if
you downshift the transmission by
turning off the overdrive switch, en-
gine braking is not applied because
the cruise control is not cancelled.
For ways to decrease the vehicle
speed, see ºCruise controlº in this
chapter.
CAUTION
Be careful when downshifting on
a slippery surface. Abrupt shifting
could cause the vehicle to spin or
skid.
(c) Using º2º and ºLº positions
The º2º and ºLº positions are used for
strong engine braking as described
previously.
With the selector lever in º2º or ºLº,
you can start the vehicle in motion as
with the lever in ºDº.
With the selector lever in º2º, the ve-
hicle will start in the first gear and
automatically shift to the second gear.
With the selector lever in ºLº, the
transmission is engaged in the first
gear.
NOTICE
Be careful not to overrev the
engine. Watch the tachometer tokeep engine rpm from goinginto the red zone. The approxi-
mate maximum allowable speedfor each position is given belowfor your reference:
º2º
..........120 km/h (74 mph)
ºLº
.......... 65 km/h (40 mph)
Do not continue hill climbing or hard towing for a long time inthe º2º or ºLº position. This
may cause severe automatictransmission damage from over-heating. To prevent such dam-
age, ºDº position should beused in hill climbing or hardtowing.
(d) Backing up
1. Bring the vehicle to a complete stop.
2. With the brake pedal held down with your foot, shift the selector
lever to the ºRº position.

4RUNNER (1998)
Lock release button
To prevent misshifting
Parking, engine starting and key removal position Reverse position Neutral position Normal driving position Position for engine braking Position for stronger engine braking than that in º2º posi- tion
With the brake pedal depressed, shift while holding the lock release button in. (The ignition switch must be in ºONºposition.) Shift while holding the lock release button in. Shifting normally Overdrive switch
For selecting either a three-speed or four-speed transmission
ºONº position(Shifting into overdrive pos-sible) ºOFFº position (Shifting into overdrive notpossible)ºO/D OFFº indicator light shows the over- drive switch is inOFF position
Driving pattern selector button For selecting a driving pattern suited to existing driving conditions
ºNORMº (Normal)mode for general driving conditioning ºPWRº (Power) mode for power- ful accelerationºPWRº mode indicator light on the instrument panel shows the driving pattern selector button isin the ºPWRº mode
Vehicles with cruise control ' When the cruise control is being used, even if you downshift the trans mission by turning
off the overdrive switch, engine braking will not be applied because the cruise control is not cancelled. For ways to
decrease the vehicle speed, see ºCruise controlº in this chapter. Automatic transmission
Four- wheel drive control

4RUNNER (1998)
Front drive control lever in ºL4º 3RZ- FE engine.....11 km/h (6
mph)
5VZ- FE engine.....12 km/h (7
mph) Vehicles with cruise control
'When the
cruise control is being used, even if
you downshift the transmission by
turning off the overdrive switch, en-
gine braking is not applied because
the cruise control is not cancelled.
For ways to decrease the vehicle
speed, see Cruise control in this
chapter.
CAUTION
Be careful when downshifting on
a slippery surface. Abrupt shifting
could cause the vehicle to spin or
skid.
(c) Using the º2º and ºLº, posi-
tions
The º2º and ºLº positions are used for
strong engine braking as described
previously.
With the selector lever in º2º or ºLº,
you can start the vehicle in motion as
with the lever in ºDº.
With the selector lever in º2º, the ve-
hicle will start in the first gear and
automatically shift to the second gear.
With the selector lever in ºLº, the
transmission is engaged in the first
gear.

4RUNNER (1998)
CAUTION
Before driving, be sure the park-
ing brake is fully released and
the parking brake reminder light
is off.
Cruise control
The cruise control allows you to
cruise the vehicle at a desired
speed over 40 km/h (25 mph) even
with your foot off the accelerator
pedal.
Your cruising speed can be maintained
up or down grades within the limits of
engine performance, although a slight
speed change may occur when driving
up or down the grades. On steeper
hills, a greater s peed change will oc-
cur so it is better to drive without the
cruise control.
CAUTION
To help maintain maximum con-
trol of your vehicle, do not use
the cruise control when driving
in heavy or varying traffic, or
on slippery (rainy, icy or snow-
covered) or winding roads.
Avoid vehicle speed increases
when driving downhill. If the ve-
hicle speed is too fast in rela-
tion to the cruise control set
speed, cancel the cruise control
then downshift the transmission
to use engine braking to slow down.