AIR CONDITIONING
Condenser
62
13828R
REMOVAL
It is not necessary to use a lift.
Drain the R134a coolant circuit.
Disconnect the battery.
Remove:
- the plastic air deflector on the upper crossmem-
ber,
- the seal (1),
- the upper crossmember (2),
- the retaining bolt (3),
- the two R134a coolant pipes (4) (fit plugs to
prevent the entry of humidity),
- the two radiator upper retaining bolts.Move the radiator-condenser assembly as far back
as possible towards the engine.
Remove the four condenser to radiator retaining
bolts (6).
Carefully remove the condenser.
REFITTING
Proceed in the reverse order to removal.
Check the condition of the seals.
Create a vacuum, then fill the circuit with R134a
using the filling equipment.
IMPORTANT
When changing the condenser, add 30 ml of
P.A.G. SP 10 oil to the circuit.
NOTE: tightening torque of bolts (6) : 0.8 daN.m.
13830R
62-54