1998 RENAULT KANGOO air condition

77 11 198 230FEBRUARY 1998Edition Anglaise
Heating and Ventilation
HEATING
Renault 1998
"The repair methods given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The methods may be modified as a result of changes by the manufacturer in the
production of the various component units and accessories from which his vehicles
are constructed".All copyrights reserved by Renault.
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault.
C
AIR CONDITIONING
CANCELS AND REPLACES:
- Section n° 6 of M.R. 325 Part Number: 77 11 194 262 of JULY 1997,
- Technical Note n° 2871A Part Number: 77 11 197 147 of DECEMBER 1997.
D7F - E7J - F8Q ENGINES

Contents
Pages
Heating and
Ventilation
Control panel
Control cables
Particle filter
Fan assembly (GMV)
Radiator
Air distribution unit61-1
61-2
61-3
61-4
61-5
61-6 HEATING
61
General
Fault finding - Introduction
Fault finding - XR25 fiche
Fault finding - Interpretation
of XR25 bargraphs
Fault finding - Customer complaints
Fault finding charts
Fault finding - Associated checks
Wiring diagram
Evaporator
Air blower unit
Compressor
Condenser
Pressure relief valve
Dehydration canister
Connecting pipes
Electrical control
Computer
62
62-1
62-3
62-4
62-6
62-18
62-19
62-43
62-44
62-48
62-50
62-51
62-54
62-55
62-56
62-57
62-60
62-61
AIR CONDITIONING

HEATING
Fan assembly (GMV)
61
PRO61.2
Take out the fan assembly through the right-hand
side of the plenum chamber.
REFITTING
Refitting is carried out in reverse order to remo-
val.
Check the condition of the seal.
REMOVAL
Disconnect the battery.
Remove :
- the windscreen wiper arms using tool
Elé. 1294-01,
- the upper seal for the plenum chamber as well
as the external air intake grille.
Disconnect the feed connector.
Remove the fan assembly mounting bolts.
61-4

AIR CONDITIONING
General
62
91096-3R1
62-1

AIR CONDITIONING
General
62
A Passenger compartment
B Engine compartment
C Exterior air
D To air mixing unit
E Scuttle panel grille
F Exterior or recirculated air
1 Compressor with variable capacity
2 Condenser
3 Dehydration canister
4 Pressure sensor
5 High pressure valve
6 Pressure relief valve
7 Evaporator
8 Low pressure valve
9 Heating/ventilation fan
10 Cooling fan
11 Engine radiator
12 High pressure fluid
13 Low pressure vapour
14 High pressure vapour
Consumables:
- Compressor oil
SANDEN SP 10: 135 cm3 ± 15
- Coolant
R134a: 650 g ± 35
- Compressor
SANDEN SD 7V 16
62-2

c11010.0
AIR CONDITIONING
Fault finding - Introduction
62
KANGOO
ALL TYPES
ESTABLISHING XR25 / HEATING-VENTILATION CONTROL UNIT DIALOGUE
- Connect the XR25 to the diagnostic socket.
- ISO selector on S8
- Enter D17 n.61
PRECAUTION :
When carrying out checks using a multimeter, avoid using a contact tip on the connectors the size of which
could damage the clips and result in poor contact.
ERASING THE MEMORY:
After repairing the air conditioning system, enter G0** on the XR25 keypad to erase the fault stored.
62-3

c11010.0
AIR CONDITIONING
Fault finding - XR25 fiche
62
KANGOO
ALL TYPES
PRESENTATION OF XR25 FICHE N° 61
FI21761
62-4

c11010.0
AIR CONDITIONING
Fault finding - XR25 fiche
62
KANGOO
ALL TYPES
REPRESENTATION OF BARGRAPHS
REPRESENTATION OF FAULTS (always on a coloured background)
If illuminated, this indicates a fault on the component in question, the associated text defines
the fault.
REPRESENTATION OF STATUS (always on a white background)
Illuminates when dialogue is established with the component computer, if it remains
extinguished:
- the code does not exist,
- there is an equipment, computer or line fault.
Engine stopped, ignition on, no operator action
The status bargraphs on the fiche are represented as they should appear with the engine stopped, ignition
on and no operator action.
- If on the fiche, the bargraph is represented the XR25 should display
- If on the fiche, the bargraph is represented the XR25 should display
- If on the fiche, the bargraph is represented the XR25 should display
either or
Engine running
Extinguished when the function or condition described on the fiche is no longer carried out.
Illuminated when the function or condition described on the fiche is carried out.
62-5