1998 PONTIAC GRAND PRIX horn

Vehicle Symbols
These are some of the symbols you may find on your vehicle.
For example,
these symbols are used on an
original battery:
POSSIBLE A
CAUTION
INJURY
PROTECT EYES BY
SHIELDING
CAUSTIC
I
BURNS I
AVOID
SPARKS
OR
FLAMES
SPARK
OR ,\I/,
COULD
FLAME
EXPLODE BAllERY
These symbols are important for you and
your passengers
whenever your
vehicle is
driven:
n
UNLOCK Fol
FASTEN
SEAT
BELTS
op
AIR BAG p
These symbols
have to do with
your lamps:
SIGNALS 6
TURN
PARKING
p$ LAMPS
FOG LAMPS
$0
These symbols are
on some of
your controls:
WINDSHIELD
WIPER
WINDSHIELD DEFROSTER
VENTILATING
1
These symbols are used on
warning and
indicator lights:
COOLANT
TEMP
-
CHARGING I-1
BAllERY
SYSTEM
BRAKE
(0)
h
ENGINE OIL
PRESSURE
Here are some
other symbols
you may see:
FUSE
LIGHTER
m
HORN tcr
SPEAKER
b
FUEL e3
V

1 ~ r: 3te Driver’s Door and All Door Unlock
When you press UNLOCK on the remote keyless entry
transmitter, only the driver’s door
will unlock. If you
press UNLOCK again within five seconds,
all the doors
will unlock. If you would like all doors to unlock the
first time you press
UNLOCK, see “Locks and Lighting
Choices”
in the Index. If your vehicle is equipped with
the Content Theft-Deterrent system, the
UNLOCK
button on the remote keyless entry transmitter will
disarm the system (see “Content Theft-Deterrent” in
the Index for more details).
Remote Trunk Release
Press the trunk symbol on your remote keyless entry
transmitter to open your
trunk. The transaxle must be in
PARK (P) for this feature to operate.
Remote Alarm (If Equipped)
When you press the horn button on the remote keyless
entry transmitter, your vehicle’s headlamps
will flash
and the horn will sound.
This will allow you to attract
attention,
if needed.
Remote LocWnlock Confirmation (If Equipped)
This feature provides feedback to the holder of the
remote keyless entry transmitter that a command has
been received
by the keyless entry receiver. To signal
that a command has been received, the headlamps will
flash and the horn
will sound briefly. To program the
various modes available, see “Locks
and Lighting
Choices” in the Index.
2-9

.“‘-
1.
2.
3.
4.
To replace your battery: -
Insert a flat object like a dime into the slot on
the side of the transmitter and twist to separate
the halves.
Gently pry the battery out
of the transmitter. Do not
use metal flanges to
“pop out” the battery.
Put the new battery into the transmitter as shown on the transmitter. Use a type CR2032 battery,
or equivalent.
Reassemble the transmitter. Make
sure the halves are
snapped together tightly
so water will not get in.
5. Check the transmitter operation. If needed, follow
the instructions on resynchronizing your remote
keyless
entry transmitter.
Resynchronizing Your Remote Keyless
Entry Transmitter
Your remote keyless entry system uses a continually
changing code for increased security. Normally, the
receiver
in your vehicle will keep track of this
changing code.
Loss of synchronization will occur if the transmitter
is activated more than 256 times while out of range
of the vehicle.
0 Loss of synchronization will occur after battery
replacement if the transmitter is immediately
activated more than 16 times while out
of range of
the vehicle.
If your remote keyless entry transmitter has stopped working,
you may need to resynchronize the transmitter to the vehicle
receiver.
To do this, press the LOCK and UNLOCK buttons
together and hold for at least seven seconds or
until the horn
sounds, when equipped with Content Theft-Deterrent.
Check the remote keyless entry transmitter.
If attempts to resynchronize your transmitter to the
vehicle
are not successful, you may need to match the
transmitter
to the vehicle.
2-11

Content Theft-Deterrent
(If Equipped)
If your vehicle has’this option, it has a theft-deterrent
alarm system.
A red light located on top of your instrument panel (near
the center
of the vehicle, next to the windshield) will
flash slowly when the system is armed.
While armed, the doors will not unlock with the power
lock switch. The
alarm will go off if someone damages
the vehicle, tampers with the trunk lock, enters the
vehicle (without using the remote keyless
entry
transmitter or key to unlock the doors), or turns the
ignition on. Your
horn will sound and your headlamps
will
flash for up to two minutes. The system will also
cut off the fuel supply, preventing the vehicle from
being driven.
Arming with the Power Lock Switch
Your alarm system will arm when you use either the
power lock switch to lock the doors while any door is
open and the key is removed from the ignition (if you
would like to
turn off the power door lock switch
arming, see “Locks and Lighting Choices” in the Index).
The security light flashes quickly to let you know when
the system is ready
to arm with the power door switches.
The security light will stop flashing
and stay on when
you press the rear of the power lock switch, to let you
know the system is arming. After all doors are closed
and locked, the security light will begin flashing at a
very slow rate to let you know the system is armed.
2-14

Power Windows
Switches on the driver’s door armrest control each of the
windows when the ignition
is on. In addition, each
passenger door has a switch
for its own window. The
driver’s window switch has an auto-down feature.
This switch is labeled AUTO. Tap the rear of the switch,
and the driver’s window will open a small amount.
If the
rear of the switch is pressed
all the way down and
released, the window will go
all the way down.
To stop the window while it is lowering, press the front
of the switch.
To raise the window, press and hold the
front of the switch.
On four-door models, the driver’s window controls also
include a lock-out switch. Press LOCK OUT to stop
front and rear passengers from using their window
switches. The driver can still control
all the windows
with the lock on. Push
LOCK OUT again for normal
window operation. When the orange band
on the switch
is showing, the passengers can operate their windows.
Full Floating Horn
The full floating horn is designed so that you may press
anywhere
on the steering wheel pad to sound the horn.
2-33

e Remote Unlock Confirmation: When you use the
remote keyless entry
transmitter to unlock your vehicle
or open your trunk, your headlamps will flash briefly
to let you
know when your command is received.
Mode 3: Remote Lock Confirmation with Exterior
Lamps and
Horn
Remote Lock Confirmation: When you use the remote
keyless
entry transmitter to lock your vehicle, the horn
will sound briefly and your headlamps will flash
briefly to let you
know your command is received.
Remote Unlock Confmnation: When you use the
remote keyless entry transmitter to unlock your vehicle
or open your
trunk, your headlamps will flash briefly
to let you
know your command is received.
Mode 4: Remote Lock Confirmation with Exterior
Lights and
Horn (on second LOCK press)
Remote Lock Confirmation: When you use the
remote keyless entry transmitter to lock your vehicle,
your headlamps will flash briefly to let you
know
your command is received. The horn will sound
briefly and the headlamps will flash briefly
if you
press the LOCK button again within five seconds.
remote keyless entry
transmitter to unlock your vehicle
e Remote Unlock Confirmation: When you use the or open your
trunk, your headlamps will flash briefly
to let you know your command is received.
Content Theft-Deterrent
Your vehicle comes with this feature set in mode 4. To
change the factory setting while in the programming
mode, do the following:
1. Turn the parking lamps on, then off.
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is set
for. You change the mode by turning the parking
lamps on, then
off again.
3. Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
Mode 1: Damage Detection with Reduced Sensitivity
(If anyone seriously damages your vehicle, tampers with
the trunk lock or opens a door while your Content
Theft-Deterrent system is armed,
an alarm will sound
and your headlamps will flash for up to two minutes).
Mode 2: Damage Detection Off (If anyone tampers with
your
trunk lock or opens a door while your Content
Theft-Deterrent system is armed,
an alarm will sound
and your headlamps will flash for up to two minutes.)
Mode 3: All Off (Your Content Theft-Deterrent system
is always disarmed.)
2-50

Mode 4: Damage Detection with Normal Sensitivity (If
anyone damages your vehicle, tampers with your
trunk
lock or enters your vehicle while your Content
Theft-Deterrent system is armed, an alarm will sound and your headlamps will flash for up to two minutes.)
Content Theft-Deterrent Arming
and Disarming
Your vehicle comes with this feature in mode 3. To
change the factory setting, while in the programming
mode do the following:
1.
2.
3.
Insert your second key fully into any door key
cylinder and
turn it to the unlock position. This step
is necessary to prevent accidental programming of
this feature to mode 2. Do not program this feature to
mode
2 without first reading the special note
contained in the description above for that mode.
The door key lock cylinder must remain in the
unlock position during Steps
2 through 4.
Press the horn symbol on your remote keyless
entry transmitter.
Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is set
for.
You change the mode by pressing the horn
symbol on your remote keyless entry
transmitter again.
4. Repeat Step 3 until you hear the number of chimes
5. Remove your key from the door key cylinder.
Mode 1: Power Lock Switch Arming Off
that matches the mode you want.
0 Your Content Theft-Deterrent system will arm when
you lock the doors with your remote keyless entry
transmitter. The key must be removed from the
ignition when you lock the doors or the Content
Theft-Deterrent system will not
arm.
0 Your Content Theft-Deterrent system will disarm
when you unlock the doors with the keys or your
remote keyless entry transmitter.
Mode 2: Remote Keyless Entry Transmitter
Arm/Disarm Only
0 Your Content Theft-Deterrent system will arm when
you lock the doors with your remote keyless entry
transmitter. The key must be removed from the ignition when you lock the doors or the content
theft-deterrent system will not
arm.
0 Your Content Theft-Deterrent system will disarm
when you unlock the doors with your remote keyless
entry transmitter.
2-51

Fuse
TRANSMISSION
mJEL PUMP
AC CLU/ABS IGN
IGN1-UH
IGN MODULE
INJ
ECM
PARK LP
FUTURE
SPARE
SPARE
SPARE
SPARE
FOG LP
mTUm
SPARE
Description
Automatic Transaxle:
Enable, Switch, Shift,
PWM
Fuel Pump
AC Clutch, ABS Ignition
MAF, Heated Sensors,
Canister Prg, Boost Solenoid
Ignition Module
Fuel Injectors
ECM/PCM
ChimeMall Module,
Taillamps, Parklamps,
Sidemarker Lamps,
Dimmable Lamps
Spare Fuse
Spare Fuse
Spare Fuse
Spare Fuse
Spare Fuse
Fog Lamps Spare Fuse
Spare Fuse
Fuse
SPARE
RADIO
HORN
ALT SENSE
Diode
AC DIODE
Relay
RELAY COOL FAN
SERIES
RELAY FUEL PUMP
(ONLY
SUPERCHARGER)
FUEL PUMP SPEED
RELAY COOL FAN
2
RELAY A/C CLUTCH
RELAY COOL FAN
1
IGN MAIN
RELAY HORN
RELAY FOG LP
Description
Spare Fuse
Radio, Keyless Entry,
Theft
Shock Sensor, Trip
Computer, HVAC Module,
ABS Module, Security LED
Horn
Alt Sense
Description
A/C Clu Diode
Description
Cooling Fan
Fuel Pump
Fuel Pump Speed Cont
Cooling Fan
2
A/C Clutch Cooling Fan
1
Ign Main
Horn
Fog Lamp