You can be injured and your vehicle could be
damaged if you
try to do service work on a
vehicle without knowing enough about it.
0
0
Be sure you have sufficient knowledge,
experience, the proper replacement parts
and tools before you attempt any vehicle
maintenance task.
Be sure to use the proper nuts, bolts and
other fasteners. “English” and ‘5netric”
fasteners can be easily confused.
If you use
the wrong fasteners, parts can later break
or fall off. You could be hurt.
Adding Equipment to the Outside of
Your Vehicle
Things you might add to the outside of your vehicle can
affect the
airflow around it. This may cause wind noise
and affect windshield washer performance. Check with
your dealer before adding equipment to the outside
of
your vehicle.
Fuel
The 8th digit of your vehicle identification number
(VIN) shows the code letter for your engine. You will
find the VIN at the top left of your instrument panel.
(See “Vehicle Identification Number” in the Index.)
If you have the 3800 engine (VIN Code K), use regular
unleaded gasoline rated at
87 octane or higher.
If you have the
5.7L engine (VIN Code G), use
premium unleaded gasoline rated at
91 octane or
higher for best performance. You may use middle
grade or regular unleaded gasolines, but your vehicle
may not accelerate as well.
At a minimum, the gasoline you use should meet specifications ASTM
D48 14 in the United States
and CGSB
3.5-M93 in Canada. Improved gasoline
specifications have been developed by the American
Automobile Manufacturers Association (AAMA) for
better vehicle performance and engine protection.
Gasolines meeting the AAMA specification could
provide improved driveability
and emission control
system protection compared to other gasolines.
6-3
Be sure the posted octane for premium is at least 91 (at
least
89 for middle grade and 87 for regular). If the
octane
is less than 87, you may get a heavy knocking
noise when you drive. If it's bad enough, it can damage
your engine.
If you're using fuel rated at the recommended octane or
higher and you hear heavy knocking, your engine needs service. But don't
worry if you hear a little pinging
noise when you're accelerating or driving up a
hill.
That's normal, and you don't have to buy a higher
octane
fuel to get rid of pinging. It's the heavy, constant
knock that means you have a problem.
If your vehicle is certified to meet California Emission
Standards (indicated on the underhood emission control
label),
it is designed to operate on fuels that meet
California specifications. If such fuels are not available
in states adopting California emissions standards, your
vehicle will operate satisfactorily on fuels meeting
federal specifications, but emission control system performance
may be affected. The malfunction indicator
lamp on your instrument panel may turn on and/or
your vehicle may fail a smog-check test. If this occurs,
return to
your authorized Pontiac dealer for diagnosis
to determine the cause of failure. In the event it is
determined that
the cause of the condition is the type of
fuels used, repairs may not be covered by your warranty.
Some gasolines that are not reformulated for
low
emissions contain an octane-enhancing additive called
methylcyclopentadienyl manganese tricarbonyl (MMT);
ask your service station operator whether or not his fuel
contains
MMT. General Motors does not recommend the
use of such gasolines.
If fuels containing "'I' are used,
spark plug life may be reduced and your emission
control system performance may be affected. The
malfunction indicator lamp on your instrument panel
may
turn on. If this occurs, return to your authorized
Pontiac dealer for service.
6-4
Before closing the hood, be sure all the filler caps are on.
Then just pull the hood down and close it firmly.
Engine Oil
LOW
OIL
If the LOW OIL light on
the instrument panel comes
on, it means you need to
check your engine oil
level right away.
For more
information, see
“Low
Oil Light” in the Index.
You should check your engine oil level regularly; this is
an added reminder.
It’s
a good idea to check your engine oil every time you
get fuel. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground. The engine
oil dipstick is the yellow loop near
the
back of the engine.
Note: Do not check the
5.7L engine oil level after the
engine has sat overnight.
A higher than normal reading
might be obtained. Check oil level with the oil warm.
Shut
off the engine, wait a few minutes, and then
check the oil.
Turn
off the engine and give the oil a few minutes
to
drain back into the oil pan. If you don’t, the oil
dipstick might
not show the actual level.
6-12
3. If an odor lingers after cleaning vomit or urine,
treat the area with a waterhaking soda solution:
1 teaspoon (5 ml) of baking soda to 1 cup (250 ml)
of lukewarm water.
4. Let dry.
Stains caused by candy, ice cream, mayonnaise, chili
sauce and unknown stains can be removed as follows:
1. Carefully scrape off excess stain.
2. First, clean with cool water and allow to
dry completely.
3. If a stain remains, follow instructions for
Multi-Purpose Interior Cleaner.
Cleaning Vinyl
Use warm water and a clean cloth.
Rub with a clean, damp cloth to remove dirt.
You may have to do it more than once.
Things like tar, asphalt and shoe polish will stain
if you don’t get them
off quickly. Use a clean cloth
and a vinyllleather cleaner. See your dealer for
this product.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with a soft cloth. Then, let the
leather dry naturally.
Do not use heat to dry.
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Never use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately. If dirt is allowed to work into the
finish, it can harm the leather.
Cleaning the Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to
see through the windshield
under certain conditions.
Cleaning Interior Plastic Components
Use only a mild soap and water solution on a soft
cloth or sponge. Commercial cleaners may affect the
surface finish.
6-55
Appearance Care Materials Chart
PART NUMBER USAGE DESCRIPTION
SIZE
994954 Exterior polishing cloth
Polishing Cloth - Wax Treated 23 in. x 25 in.
1050172 Removes tar, road oil and asphalt
Tar and Road Oil Remover 16 oz. (0.473 L)
1050173
Cleans and lightly waxes
Wash Wax Concentrate 16 oz. (0.473 L) 1052870 Removes dirt, grime, smoke and fingerprints
Glass Cleaner
23 oz. (0.680 L) 1050427
Cleans vinyl tops, upholstery and convertible tops Vinyl Cleaner\
32 oz. (0.946 L) 1050214
Removes soil and black marks from whitewalls
White Sidewall Tire Cleaner 16 oz. (0.473 L) 1050174
Use on chrome, stainless steel, nickel, copper and brass Chrome Cleaner and Polish 16 oz. (0.473 L)
~~
1052918”” Armor All Protectant 8 oz. (0.237 L) Protects leather, wood, acrylics, Plexiglas TM , plastic,
rubber and vinyl
1 1052925 I 16 oz. (0.473 L) I Multi-Purpose Interior Cleans carpets, seats, interior trim, door panels
I Cleaner and floor mats _~. ~..~
1052929 16 oz. (0.473 L) Wheel Cleaner
1052930 8 oz. (0.237 L) Capture
Dry Spot Remover
12345002 16 oz. (0.473 L) Armor All TM Cleaner
12345721
2.5 sq. ft. Synthetic Chamois
12345725 12 oz. (0.354 L) Silicone Tire Shine
12377964 16 oz. (0.473 L) Finish Enhancer
12377966 16 oz. (0.473 L) Cleaner Wax
12377984 16 oz. (0.473 L)
Surface Cleaner
See your General Motors
PGS Department for these products.
See “Fluids and Lubricants” in the Index. Spray on and rinse with water
Attracts, absorbs and removes soils
Cleans and shines a variety of surface types
~~
Shines vehicle without scratching
Spray on tire shine
Removes dust, fingerprints and surface contaminants
Removes light scratches and oxidation and protects finish
~ Removes contaminants, blemishes and swirl marks
k* Not recommended for use on instrument panel vinyl.
6-61
Vehicle Identification Number (VIN)
0, -111 11111111 1111 111 111111 111 11111111 111111111111 111111111 11- 0
SAMPLE4UXWM072675 t
ENGINE A98 f 1 ASSEMBLY
CODE- MODEL YEAR PLANT
-
This is the legal identifier for your vehicle. It appears on
a plate in the front corner of the instrument panel, on the
driver’s side. You can see it if you look through the
windshield from outside your vehicle. The
VIN also
appears on the Vehicle Certification and Service Parts
labels and the certificates of title and registration.
Engine Identification
The 8th character in your VIN is the engine code. This
code will help you identify your engine, specifications
and replacement
parts.
Service Parts Identification Label
You’ll find this label located on the driver’s side door.
It’s
very helpful if you ever need to order parts. On this
label is:
yourvm,
the model designation,
paint information and
0 a list of all production options and special
Be sure that this label is not removed from the vehicle.
equipment.
Electrical System
Add-on
Electrical Equipment
I NOTICE:
Don’t add anything electrical to your vehicle
unless you check with your dealer first. Some
electrical equipment can damage your vehicle
and the damage wouldn’t be covered by your
warranty.
Some add-on electrical equipment
can keep other components from
working as
they should.
Your vehicle has an air bag system. Before attempting to
add anything electrical to your vehicle, see “Servicing
Your Air Bag-Equipped Pontiac” in the Index.
6-62
Headlamps
The headlamp wiring is protected by a circuit breaker.
An electrical overload will cause the lamps to go on and
off, or in some cases to remain off. If this happens, have
your headlamp wiring checked right away.
Windshield Wipers
The windshield wiper motor is protected by a circuit
breaker and a fuse.
If the motor overheats due to heavy
snow, etc., the wiper will stop until the motor cools. If
the overload is caused by some electrical problem and
not snow, etc., be sure to get it fixed.
Power Windows and Other Power Options
Circuit breakers protect the power windows and other
power accessories. When the current load is too heavy,
the circuit breaker opens
and closes, protecting the
circuit until the problem
is fixed or goes away.
Fuses and Circuit Breakers
The wiring circuits in your vehicle are protected
from short circuits by a combination of fuses, circuit
breakers and fusible thermal links in the wiring itself.
This greatly reduces the chance
of fires caused by
electrical problems.
There are three fuse centers on your vehicle. One is in
the left side of your instrument panel.
6-63
000
INJ INJ ENG SEN
STRTR ABS IGN PCM ION
000 ENG CTRL NC CRUISE
j 1:
15305530 A
Fuse
INJ
INJ
Fuse and Relay Center 2
Usage
Fuel Injectors (Not used for V6) (LH
injectors for V8 Ignition Module)
Fuel Injectors (All for
V6) (RH
injectors for V8 and Ignition Module)
ENG SEN Mass Air Flow, Heated Oxygen
Sensor,
Skip Shift Solenoid (V8
Only), Reverse Lockout Solenoid,
Brake Switch
STRTR
Powertrain Control Module and
Clutch Pedal Switch
Fuse
ABS IGN
PCM IGN
ENG CTRL
NC CRUISE
ENG CTRL
I/P- 1
IGN
m-2
Relay
AIR SOL
AIR PUMP
AIC COMP
FUELPUMP STARTER
IGN
Usage
Anti-Lock Brake System Module
Powertrain Control Module
Ignition Module
(V6 Only),
Automatic Transmission and
Charcoal
Canister Purge Solenoid
Air Conditioning Compressor Relay, Cruise Control Switches and Module
Engine Controls, Fuel
Pump, PCM,
A.I.R. and Cooling
Fans
HVAC Blower Control and Relay
Ignition Switch, Relay and Starter
Enable Relay
Instrument Panel
Fuse Center
6-67