5. Then replace the pressure cap. Be sure the pressure
Check the level in the surge tank when the cooling
system has cooled down. If the coolant isn’t at the
proper level, repeat Steps
1 to 3 and reinstall the
pressure cap or
see your retailer.
cap
is tight.
If a Tire Goes Flat
It’s
unusual for a tire to “blow out” while you’re driving,
especially if you maintain your tires properly. If
air goes
out of a tire, it’s much more likely to leak out slowly.
But
if you should ever have a “blowout,” here are a few
tips about what to expect and what to do:
If a front tire fails, the flat tire will create a drag that
pulls the vehicle toward that side. Take your foot off the
accelerator pedal and grip the steering wheel firmly.
Steer to maintain lane position, and then gently brake to
a stop well out of the traffic lane.
A rear blowout, particularly on a curve, acts much like a
skid and may require the same correction you’d use in a
skid. In any rear blowout, remove your foot from the
accelerator pedal. Get the vehicle under control by
steering the way you want the vehicle to go. It may be
very bumpy and noisy, but you can still steer. Gently
brake to a stop
-- well off the road if possible.
If a tire goes flat, the next part shows how to use your
jacking equipment to change a flat tire safely.
5-24
Removing the Spare Tire and Tools
The equipment you’ll need
is in the trunk. Pull the
carpeting from the floor of
the trunk. Turn the center
retainer
nut on the compact
spare cover to the left to
remove it.
Lift and remove the cover. (See “Compact Spare Tire”
later in this section for more information about the
compact spare.) You will find the jacking instructions
label on the underside of the tire cover.
-d Turn the wing nut to the left
and remove it. Then lift off
the adapter and remove the spare tire.
Remove the jack and wheel wrench from the trunk.
Your vehicle’s jack and wheel wrench are stored in
a
foam tray.
5-26
