1998 Lexus LS400 brake

MAINTENANCE
216Parking brake
Check that the pedal has the proper travel and that, on a safe incline,
your vehicle is held securely with only the parking brake applied.
Automatic transmission ”Park” mechanism
On a safe incline, check that your vehicle is held securely with the
selector lever in ”P” position and all brakes released.
Engine compartment
Items listed below should be checked from time to time, e.g. each
time when refueling.
Washer fluid
Make sure there is sufficient fluid in the tank. See page 261 for
additional information.
Engine coolant level
Make sure the coolant level is between the Upper and Lower lines
on the seethrough reservoir when the engine is cold. See page 233
for additional information.
Battery
Your Lexus has a maintenance free battery. You do not have to add
distilled water. For longer life of the battery, however, see page 253
for additional information.
Brake fluid level
Make sure the brake fluid level is correct. See page 239 for
additional information.Engine oil level
Check the level on the dipstick with the engine turned off and the
vehicle parked on a level spot. See page 230 for additional
information.
Power steering fluid level
Check the level on the dipstick. The level should be in the ”HOT”
or ”COLD” range depending on the fluid temperature. See page 240
for additional information.
Exhaust system
Look for cracks, holes and loose supports. If you notice any change
in the sound of the exhaust or smell exhaust fumes, have the cause
located and corrected immediately. (See engine exhaust cautions in
Section 31.)

MAINTENANCE
217
DOES YOUR VEHICLE NEED
REPAIRING?
Be on the alert for changes in performance and sounds, and visual
tipoffs that indicate service is needed. Some important clues are:
Engine missing, stumbling, or pinging
Appreciable loss of power
Strange engine noises
A fluid leak under the vehicle (However, water dripping from the
air conditioning after use is normal.)
Change in exhaust sound (This may indicate a dangerous carbon
monoxide leak. Drive with the windows open and have the
exhaust system checked immediately.)
Flatlooking tires, excessive tire squeal when cornering, uneven
tire wear
Vehicle pulls to one side when driving straight on a level road
Strange noises related to suspension movement
Loss of brake effectiveness, spongy feeling brake pedal, pedal
almost touches floors, vehicle pulls to one side when braking
Engine coolant temperature continually higher than normal
If you notice any of these clues, take your vehicle to your Lexus
dealer as soon as possible. It probably needs adjustment or repair.
CAUTION
Do not continue driving with the vehicle unchecked. It could
result in serious vehicle damage and possibly personal injury.

61L005-5
INTRODUCTION
220
ENGINE COMPARTMENT OVERVIEW
1 Brake fluid reservoir
2 Fuse box
3 Battery
4 Washer fluid tank
5 Engine oil level dipstick
6 Engine oil filler cap
7 Power steering fluid
reservoir
8 Engine coolant reservoir

INTRODUCTION
223
Checking brake fluid
Parts (if level is low):
FMVSS No. 116 DOT 3 or SAE J1703 brake fluid
Tools:
Funnel (only for adding fluid)
Checking power steering fluid
Parts (if level is low):
Automatic transmission fluid DEXRON
II or III
Tools:
Rag or paper towel
Funnel (only for adding fluid)
Checking battery condition
Nonmaintenance batteries
Tools:
Warm water
Baking soda
Grease
Conventional wrench (for terminal clamp bolts)
Maintenance type batteries
Parts (if level is low):
Distilled waterTools:
Warm water
Baking soda
Grease
Conventional wrench (for terminal clamp bolts)
Coin (for vent plugs)
Funnel (only for adding distilled water)
Checking and replacing the blade type fuses
Parts (if replacement is necessary):
Fuse with same amperage rating as original
Checking the cartridge type fuses
Parts (if replacement is necessary):
Genuine Lexus fuse or equivalent with same amperage rating as
original
Adding washer fluid
Parts:
Water
Washer fluid containing antifreeze (for winter use)
Tools:
Funnel

SECTION 6 3
236
SERVICE PROCEDURES AND
SPECIFICATIONS
Chassis
Specifications 237. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking brake fluid 239. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking power steering fluid 240. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking tire pressure 241. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rotating tires 242. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking and replacing tires 243. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing snow tires and chains 245. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing wheels 247. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminum wheel precautions 247. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suspension and chassis 247. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CHASSIS
237
SPECIFICATIONS
AUTOMATIC TRANSMISSION
Fluid capacity
Drain and refill
Fluid type
1.9 L (2.0 qt., 1.7 lmp.qt.)
Automatic transmission fluid Type T IV or equivalent
DIFFERENTIAL
Oil capacity
Oil type
Oil viscosity
1.3 L (1.4 qt., 1.1 lmp.qt.)
Hypoid gear oil API GL5
Above 18C (0F): SAE 90
Below 18C (0F): SAE 80W or SAE 80W90
BRAKES
Pedal clearance
Pedal freeplay
Brake pad wear limit
Parking brake lining wear limit
Parking brake adjustment
Fluid type
70 mm (2.8 in.) Min. *1
1 6 mm (0.04 0.24 in.)
1.0 mm (0.04 in.)
1.0 mm (0.04 in.)
5 7 clicks *
2
SAE J1703 or FMVSS No. 116 DOT 3
*1: Minimum pedal clearance when depressed with the pressure of 490 N (50 kgf, 110 lbf.) with the engine running
*
2: Parking brake adjustment when depressed with the pressure of 294 N (30 kgf, 66.1 lbf.)

CHASSIS
239
CHECKING BRAKE FLUID
63L0012
To check the fluid level, simply look at the seethrough reservoir.
The level should be between the ”MAX” and ”MIN” lines on the
tank.
It is normal for the brake fluid level to go down slightly as the brake
pads wear. So be sure to keep the reservoir filled.
If the reservoir needs frequent refilling, it may indicate a serious
mechanical problem.
If the level is low, add FMVSS No.116 DOT 3 or SAE J1703 brake
fluid to the brake reservoir.
Remove and replace the reservoir cover by hand. Add brake fluid
up to the ”MAX” line.
Use only newly opened brake fluid. Once opened, brake fluid
absorbs moisture from the air, and excess moisture can cause a
dangerous loss of braking efficiency.
CAUTION
Take care when filling the reservoir because brake fluid can
harm your eyes and damage painted surfaces. If fluid gets in
your eyes, flush your eyes with clean water.

CHASSIS
247
REPLACING WHEELS
When to replace your wheels
If you have wheel damage such as bending, cracks or heavy
corrosion, the wheel should be replaced.
If you fail to replace damaged wheels, a tire may slip off a wheel or
they may cause loss of handling control.
Replacement with used wheels is not recommended as they may
have been subjected to rough treatment or high mileage and could
fail without warning. Also, bent wheels which have been
straightened may have hidden structural damage and therefore
should not be used. Never use an inner tube in a leaking wheel which
is designed for a tubeless tire.
Wheel selection
When replacing wheels, care should be taken to ensure that they
are equivalent to those removed in load capacity, diameter, rim
width, and offset.
Correct replacement wheels are available at your Lexus dealer.
A wheel of a different size or type may adversely affect handling,
wheel and bearing life, brake cooling, speedometer/odometer
calibration, stopping ability, headlight aim, bumper height, vehicle
ground clearance, and tire or snow chain clearance to the body and
chassis.
ALUMINUM WHEEL
PRECAUTIONS
After driving your vehicle the first 1600 km (1000 miles), check
that the wheel nuts are tight.
If you have rotated, repaired, or changed your tires, check that the
wheel nuts are still tight after driving 1600 km (1000 miles).
When using tire chains, be careful not to damage the aluminum
wheels.
Use only the Lexus wheel nuts and wrench designed for your
aluminum wheels.
When balancing your wheels, use only Lexus balance weights or
equivalent and a plastic or rubber hammer.
As with any wheel, periodically check your aluminum wheels for
damage. If damaged, replace immediately.
SUSPENSION AND CHASSIS
CAUTION
Do not modify the suspension/chassis with lift kits, spacers,
springs, etc. It can cause dangerous handling characteristics,
resulting in loss of control.