1998 JAGUAR X308 tow

                Removal and  Installation  
                     Door (76. 28.04)  
                     Front Doo
r 
Opening  Weatherstrip  (76.40.01)  
                     Fuel Filler  Door  (76.10.25)  
                     Hood (76.16.01)  
                     Hood Hinge  (76.16.12)  
                     Hood Striker  (76.16.24)  
                     Hood Strut  (76.16.15)  
                     Luggage Compartment  Lid Hinge  (76.19.28)  
                     Luggage Compartment  Lid Opening  Weatherstrip  (76.19.06)  
                     Luggage Compartment  Lid Striker  (76.19.12)  
                     Luggage Compartment  Lid Strut  (76.19.27)  
                     Rear Door  Opening  Weathe
rstrip (76.40.02)  
 
             501‐05:  Interior  Trim  and  Ornamentation  
                 Description  and  Operation  
                     Interior Trim  
                 Removal and  Installation  
                     A‐Pillar  Trim Panel  (76.13.31)  
                     B‐Pillar  Trim Panel  (76.13.28)  
                     Cowl Side  Trim  Panel  (76.13.30)  
                     C‐Pillar  Trim  Panel  (76.13.73)  
                     Door Window  Control Switch  Finish Pane
l (76.47.33)  
                     Engine Cover  (76.11.35)  
                     Floor Covering  (76.49.08)  
                     Folding Tray  (76.47.31)  
                     Folding Tray  Finish  Panel  (76.47.32)  
                     Front Door  Armrest  (76.34.22)  
                     Front Door  Trim Panel  Finish Panel  (76.47.11)  
                     Front Door  Stowage  Compartment  (76.34.27) 
                     Front Door  Trim Panel  (76.34.01)  
                     Headliner (76.64.01)  
                     Luggage Compartment  Front Trim Panel  (76.19.31)  
                     Luggage Compart
ment Lid Trim  Panel  (76.19.05)  
                     Luggage Compartment  Rear Trim  Panel  (76.19.44)  
                     Luggage Compartment  Side Trim  Panel  (76.19.22)  
                     Overhead Console  Finish  Panel  (76.47.41)  

                    Front Doo r
 
Window  Regulator  and  Motor  (76.31.45)  
                     Front Door  Window  Regulator  Motor  (76.31.45)  
                     Front Door  Window  Control  Switch  (86.25.07)  
                     Rear Door  Window  Glass  (76.31.02)  
                     Rear Door  Window  Glass  Weatherstrip  (76.40.29)  
                     Rear Door  Window  Regulator  and  Motor  (86.25.09)  
                     Rear Door  Window  Regulator  Motor  (86.25.09)  
                     Rear Door  Window  Control  Swi
tch (86.25.10)  
                     Rear Quarter  Window  Glass  (76.31.31)  
                     Rear Window  Glass  (76.81.11)  
                     Windshield  Glass  (76.81.40)  
 
             501‐12:  Instrument  Panel  and  Console  
                 Specification  
                 Description  and  Operation  
                     Instrument  Panel  and Instrument  Panel  Console  
                 Removal and  Installation  
                     Audio Unit  Housing  (76.25.15)  
                     Climate Control Assembly  Housing 
                     Coin Stowage  Compartment (76.46.37)  
                     Floor Co
nsole  (76.25.01)  
                     Floor Console  Ashtray  (76.25.25)  
                     Floor Console  Extension  (76.25.05)  
                     Floor Console  Finish  Panel  (76.47.26)  
                     Floor Console  Finish  Panel  Bracket  (76.25.26)  
                     Floor Console  Stowage  Compartment  (76.25.16) 
                     Floor Console  Stowage  Compartment  Lid (76.25.18)  
                     Glove Compartment  (76.52.03) 
                     Glove Compartment  Lid (76.52.02)  
                     Glove Compartment  Lid Damper  (76.52.22)  
                     Glove Co
mpartment  Liner  (76.52.21)  
                     Instrument  Cluster  Finish Panel  (76.47.24)  
                     Instrument  Cluster  Finish Panel  Bezel  (88.20.33)  
                     Instrument  Panel  (76.46.01)  
                     Instrument  Panel  Finish Panel  (76.47.06)  
                     Instrument  Panel  Lower  Trim  Panel  (76.46.11)  
                     Overhead Console  (76.13.69)  

Jacking and Lifting - Vehicle Recovery
Description an
d Operation
• NOTE: Prior to recovery, ensure that the vehicle keys are available and the security system disarmed.
Vehicle recovery methods are:
By fl
at-bed transporter.
By rear suspended tow.


By emergency to

wing for
very short distances.
Gears
hift Interlock
The
gear selector lever can only be moved
from the Park position by turning the igni tion key to position II and depressing
the brake pedal.
To remove the key from the ignition switch, the gear select or lever must be moved to the Park position. With the key
removed, the gear selector is locked in the Park position.
The selector lever can be manually unlocked from the Park position in the event of electrical failure or when moving the
vehicle without power. Refer to the general procedure in this section.
Transporter or Trailer Recovery

When the vehicle is being recove red by transporter or trailer:
The parking brake must be
be applied and the wheels chocked.
The

gear selector lever must be in Ne
utral. Do not select Park as the park ing lock mechanism may be damaged by
the forward and backward rocking motion of the vehicle.
The ve
hicle must be securely tied down to the transporter or
trailer. There are four tie-down brackets on the vehicle
underbody. Do not use the vehicle towing points or crossbeam tie bar.

Wh en t
he vehicle is being reco
vered by rear suspended tow:
The ignition key must be remo ved from the ig
nition switch to lock the stee
ring with the front wheels facing straight
ahead.
The re ar
wheels must be
correctly positioned in the lifting cradle and securely tied down.
Em
ergency Towing
WARNING: IF THE

ENGINE IS NOT
RUNNING, THE STEERING WILL BECOME HEAVY AND THE FORCE NECESSARY TO
EFFECTIVELY APPLY THE BRAKES WILL BE GREATLY INCREASED.
• CAUTIONS:
A vehicle with a defective transmission must be towed by rear suspended tow.
The vehicle towing point is not suit able for use with a solid tow-bar.
Do not use the crossbeam tie bar as a towing location.
When the vehicle is being towed on its own wheels:
Loc a
l regulations for the towing of ve
hicles must be followed. In some co untries the registration number of the
towing vehicle and an 'On Tow' sign or warning triangle must be displayed at the rear of the towed vehicle.
The gear s
elector lever
must be in Neutral.
The
ignition switch must be in positi
on II to release the steering lock and make the direction indicators, horn and
stop lamps operate.
A di
stance of 0.8 km (0.5 mi
le) must not be exceeded.
A spe
ed of 48 km/h (30 mph) must not be exceeded.
The tow rope must be attached using th
e towi
ng location provided; refer to Front Towing Point in this section.

Rear Su
spended
Tow

P
arts List
The front towing point:
Is a welded loop on the ri
ght-ha
nd bumper mounting bracket.
Mus
t only be used when the grille
vane has been removed by turning the three fasteners anti-clockwise.
Rear Towing Point

The rear towing point is a welded loop on the right-hand side of the trunk floor panel; it must not be used for towing
another vehicle.

It
em
Par
t Number
De
scription
1—Fr

ont towing loop
2—Gr

ille vane
3—Gr

ille vane fastener


F
ront Towing Point

I
nstallation
•
NOTE: The large diameter driveshaft tu
be MUST be towards the transmission
R
emove the fixings (2) center
bearing to mounting bracket
1. Installation is the reverse of the removal procedure, noting
that;

2. R
efer to the illustration
E

nsure that the asse
mbly is central and that the bearing
housing does NOT contact the transmission tunnel

3. R
efer to the illustration

4. R
efer to the illustration - tran
smission AND final drive flanges
R
enew the driveshaft fixings

Front Disc Brake - Front Disc Brake
Description and Operation


The brake disc is mounted on the wheel studs and is clamped between the wheel and hub. Cooling ducts run through the
center of the brake disc to provide the required ventilation to keep the disc cool under operating conditions.
The caliper carrier, which is se cured to the vertical link by two bolts, carries the single-pis ton caliper housing. The caliper
housing is secured to the caliper carrier by two guide-pins and an anti-rattle spring. When the brakes are applied the
caliper-housing piston pushes th e brake pad in front of it, towards the brake di sc. This movement forces the caliper housing
to move along the guide-pins, in the oppo site direction of the piston, to apply the second brake pad. The brake disc is
therefore gripped between the two pads. As brake pressure is increased the grip on the brake disc is increased to slow-down
the rotation of the road wheel.
The disc brakes requ ire no adjustment.
It
e
m
Par
t
Number
De
scr
iption
1—B
r
ake Disc
2—Caliper Housin
g
3—Caliper Carrier
4—Brake Pads
5—Guide P i
ns
6—Du
st
Covers
7—An
ti
-rattle Spring
8—Du
st
Shield
9—Brake Hos
e

10—Bleed Nipp
le

Rear
Disc Brake - Rear Disc Brake
Description an
d Operation

The brake disc is mounted on the wheel studs and is clamped between the wheel and hub. Cooling ducts run through the
center of the brake disc to provide the required ventilation to keep the disc cool under operating conditions.
The caliper carrier, which is se cured to the hub carrier by two bolts, carries the single-piston caliper housing. The caliper
housing is secured to the caliper carrier by two guide-pins and an anti-rattle spring. When the brakes are applied the
caliper-housing piston pushes th e brake pad in front of it, towards the brake di sc. This movement forces the caliper housing
to move along the guide-pins, in the oppo site direction of the piston, to apply the second brake pad. The brake disc is
therefore gripped between the two pads. As brake pressure is increased the grip on the brake disc is increased to slow-down
the rotation of the road wheel.
The disc brakes requ ire no adjustment.
It
em
Par
t Number
De
scription
1—B

rake Disc
2—Caliper Housin

g
3—Caliper Carrier
4—Brake Pad

s
5—Guide P

ins

6—Du
st Covers
7—An

ti-rattle Spring
8—Du

st Shield
9—Brake Hos

e
10—Bleed Nipp

le