TABLE OF CONTENTS
1: General Information
100:
Service Information
100‐00: General Information
Description and Operation
General Service Information
Terminology Glossary
100‐01: Identification Codes
Description and Operation
Identification Codes
100‐02: Jacking and Lifting
Description and Operation
Jacking
Safety Precautions
Vehicle Recovery
General Procedures
Using the Vehicle Ja
ck
Using the Workshop Jack
2: Chassis
204: Suspension
204‐00: Suspension System ‐ General Information
Specification
General
Procedures
Front
Camber and Caster Adjustment (57.65.02)
Front
Camber, Caster and Toe Adjustment (57.65.03)
Front
Toe Adjustment (57.65.01)
Identification
Codes -
Identification Codes
Descr
iption and Operation
En
gine Number
The en
gine number (10 digits) is stamped on a raised pad on th
e front of the engine block near the thermostat housing. The
piston grade reference (8 digits) is also shown.
Automatic Transmission
Number
The
serial number of the transmission unit is displayed on
a metal or bar code label attached to the LH side of the
transmission casing.
Veh
icle Identification
Dependent
upon market, the VIN and other info
rmation is displayed on a label located ei ther on the rear edge of the LH front
door or on the body front upper crossmember. For certain mark ets, the VIN appears on a bar code label referred to as the
Certification Label and additionally carries the month and year of manufacture, vehicle weight data and paint and trim codes.
The VIN is also displayed on a plate visible through the windshie ld. It is essential that the vehicle identification number (VIN)
is quoted when ordering parts, and in all associated correspondence.
ItemDe
scription
GVW
R
G
ross Vehicle Weight Rating
GAW
R F
Gros
s Front Axle Weight Rating
GAW
R R
Gros
s Rear Axle Weight Rating
Pai
nt
Pai
nt Code
TrimTrim
Code
