1998 ISUZU TROOPER warning

SEATS8G±1
BODY AND ACCESSORIES
SEATS
CONTENTS
Service Precaution 8G±1. . . . . . . . . . . . . . . . . . . . . .
Front Seat Assembly 8G±2. . . . . . . . . . . . . . . . . . . .
Front Seat Assembly and Associated
Parts 8G±2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal 8G±2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8G±3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View (Long Wheel Base) 8G±3. .
Disassembly 8G±4. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly 8G±5. . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View (Short Wheel Base) 8G±6. .
Disassembly 8G±6. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly 8G±8. . . . . . . . . . . . . . . . . . . . . . . . . .
Power Seat Assembly 8G±9. . . . . . . . . . . . . . . . . . .
General Description 8G±9. . . . . . . . . . . . . . . . . . . . . .
Disassembled View 8G±9. . . . . . . . . . . . . . . . . . . .
Disassembly 8G±10. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly 8G±12. . . . . . . . . . . . . . . . . . . . . . . . . .
Power Seat Switch 8G±12. . . . . . . . . . . . . . . . . . . . . .
Removal 8G±12. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8G±12. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Tilt Motor / Rear Tilt Motor /
Slide Motor / Recliner Motor 8G±13. . . . . . . . . . . . . .
Parts Location 8G±13. . . . . . . . . . . . . . . . . . . . . . . .
Removal and Installation 8G±13. . . . . . . . . . . . . . .
Seat Heater System 8G±14. . . . . . . . . . . . . . . . . . . . .
General Description 8G±14. . . . . . . . . . . . . . . . . . . . . .
Seat Heater Switch Removal and
Installation 8G±14. . . . . . . . . . . . . . . . . . . . . . . . . . . Heat Unit Parts Location 8G±14. . . . . . . . . . . . . . . .
Heat Unit Removal and Installation 8G±14. . . . . .
Rear Seat Assembly 8G±15. . . . . . . . . . . . . . . . . . . . .
Rear Seat Assembly and Associated Parts 8G±15
Removal 8G±15. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8G±15. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View (Split Type) 8G±16. . . . . . . . .
Disassembly (Split Type) 8G±17. . . . . . . . . . . . . . .
Reassembly (Split Type) 8G±18. . . . . . . . . . . . . . . .
Disassembled View (Short Wheel Base) 8G±19. .
Disassembly 8G±19. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly 8G±20. . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View (Bench Type) 8G±21. . . . . . .
Disassembly (Bench Type) 8G±22. . . . . . . . . . . . .
Reassembly (Bench Type) 8G±23. . . . . . . . . . . . . .
Third Seat Assembly 8G±23. . . . . . . . . . . . . . . . . . . . .
Parts Location 8G±23. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8G±23. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8G±24. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View 8G±24. . . . . . . . . . . . . . . . . . . .
Disassembly 8G±25. . . . . . . . . . . . . . . . . . . . . . . . . .
Reassembly 8G±25. . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Seat Foot Rest 8G±25. . . . . . . . . . . . . . . . . . . . .
Rear Seat Foot Rest and Associated Parts 8G±25
Removal 8G±26. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8G±26. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specifications 8G±26. . . . . . . . . . . . .
Service Precaution
WARNING: I F S O E Q U IPPED WITH A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS),
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON OR
NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.

8G±2SEATS
Front Seat Assembly
Front Seat Assembly and Associated Parts
750RX016
Legend
(1) Rear Cover
(2) Front Seat Assembly
(3) Seat Belt Warning Connector/Pretensioner
Harness Connector
(4) Rear Seat Foot Rest (L´W´B)(5) Seat Rail Cover (S´W´B)
(6) Door Sill Plate
(7) Riser Cover (L´W´B)
(8) Seat Slide Cover (S´W´B)
(9) Front Cover
(10) Seat Rail Cover and Hole Cover (S´W´B)
Removal
1. Disconnect the battery ground cable.
2. Remove the front cover.
3. Remove the rear cover.

Remove the cover fixing screw from the rear inner
cover, if this model is equipped with the power
seats.
4. Remove the door sill plate.5. Remove the rear seat foot rest.

Refer to the Rear Seat Foot Rest in this section.
6. Remove the riser cover.
7. Remove the seat belt warning connector (Driver's
side only) or pretensioner harness connector.
8. Remove the front seat assembly.

Disconnect the power seat connector, if this model
is equipped with the power seats.

8H±2SECURITY AND LOCKS
Service Precaution
WARNING: I F S O E Q U IPPED WITH A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS),
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON OR
NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
Front Door Lock Assembly
Front Door Lock Assembly and Associated Parts
632RS003
Legend
(1) Door Trim Panel
(2) Waterproof Sheet
(3) To Outside Handle(4) Rear Guide Rail
(5) Door Lock Assembly
(6) Door Lock Switch Connector (W/Power Door
Lock)
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel.3. Remove the waterproof sheet.
Refer to the Window Regulator removal procedure in
Body Structure section.

8H±22SECURITY AND LOCKS
Anti-theft System
General Description
The circuit consists of the starter switch, anti-theft &
keyless entry control unit, anti-theft horn, front door and
tailgate key switch (detect and tamper switch), door lock
(& power window) switch, door lock actuator for each
door, engine hood switch, clutch start switch (M/T),
ANTI-THEFT indicator light and mode switch (A/T).
The system operates as follows: After locking the starter
switch and removing the starter key (this sets the alarm),
if the door is unlocked in any way other than with the
proper key, the headlights start flashing, the horn sounds,
and the starter circuit is disabled. (However, the engine
hood and all the doors must be locked and closed.)
Once the system has been placed in the warning or alarm
condition, it can be released only when the starter switch
is shifted from ªOFFº to ªACCº by the starter key, or when
the lock of the front door or the tailgate is released (to
activate the detect switch) by the starter key.
Anti-theft & Keyless Entry Control
Unit Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly.

Refer to the Instrument Panel Assembly in Body
Structure section.
3. Remove the lower cluster assembly.

Refer to the Instrument Panel Assembly in Body
Structure section.
4. Disconnect the connector(2).
5. Remove four screws to remove the anti-theft &
keyless entry control unit with bracket(1).
825RW029
6. Remove two nuts from the anti-theft & keyless entry
control unit with bracket(3) to remove the anti-theft &
keyless entry controller(4).
825RW028
Anti-theft & Keyless Entry Control
Unit Installation
To install, follow the removal steps in the reverse order.
Anti-theft Indicator Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly(1).
Refer to the Instrument Panel Assembly in Body
Structure section.
3. Remove the lower cluster assembly(2).
Refer to the Instrument Panel Assembly in Body
Structure section.
4. Remove the instrument panel driver lower cover
assembly(3).
Refer to the Instrument Panel Assembly in Body
Structure section.
821RW024

SUN ROOF/CONVERTIBLE TOP8I±1
BODY AND ACCESSORIES
SUN ROOF/CONVERTIBLE TOP
CONTENTS
Service Precaution 8I±1. . . . . . . . . . . . . . . . . . . . . .
Sun Roof Glass 8I±2. . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Glass and Associated Parts 8I±2. . . .
Removal 8I±2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Deflector 8I±4. . . . . . . . . . . . . . . . . . . . . .
Removal 8I±4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±4. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sunshade 8I±4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View 8I±4. . . . . . . . . . . . . . . . . . . .
Removal 8I±5. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±5. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Frame Complete Assembly 8I±6. . . . . .
Sun Roof Frame Complete Assembly and
Associated Parts 8I±6. . . . . . . . . . . . . . . . . . . . . .
Removal 8I±6. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±7. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembled View 8I±7. . . . . . . . . . . . . . . . . . . .
Disassembly 8I±7. . . . . . . . . . . . . . . . . . . . . . . . . . Reassembly 8I±8. . . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Drain Hose (Front Side) 8I±9. . . . . . . . .
Sun Roof Drain Hose (Front Side) and
Associated Parts 8I±9. . . . . . . . . . . . . . . . . . . . . .
Removal 8I±9. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±9. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Drain Hose (Rear Side) 8I±10. . . . . . . . .
Sun Roof Drain Hose (Rear Side) and
Associated Parts 8I±10. . . . . . . . . . . . . . . . . . . . . .
Removal 8I±10. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±10. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Switch 8I±11. . . . . . . . . . . . . . . . . . . . . . . .
General Description 8I±11. . . . . . . . . . . . . . . . . . . . . .
Removal 8I±11. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±11. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sun Roof Motor 8I±12. . . . . . . . . . . . . . . . . . . . . . . . .
Removal 8I±12. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8I±12. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specifications 8I±12. . . . . . . . . . . . .
Service Precaution
WARNING: I F S O E Q U IPPED WITH A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS),
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON OR
NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.

8J±2EXTERIOR/INTERIOR TRIM
Quarter Flipper Glass Assembly (S´W´B) 8J±33. . .
Quarter Flipper Glass Assembly and
Associated Parts 8J±33. . . . . . . . . . . . . . . . . . . . . .
Removal 8J±33. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±33. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tailgate Trim Panel (LH) 8J±34. . . . . . . . . . . . . . . . .
Tailgate Trim Panel (LH) and Associated
Parts 8J±34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal 8J±34. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±35. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tailgate Trim Panel (RH) 8J±36. . . . . . . . . . . . . . . . .
Parts Location 8J±36. . . . . . . . . . . . . . . . . . . . . . . .
Removal 8J±36. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±36. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Luggage Floor Box 8J±37. . . . . . . . . . . . . . . . . . . . . .
Luggage Floor Box and Associated Parts 8J±37.
Remove 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rope Hook Set 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . Rope Hook Set and Associated Parts 8J±37. . . .
Removal 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 8J±37. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Door Mirror System 8J±38. . . . . . . . . . . . . . .
General Description 8J±38. . . . . . . . . . . . . . . . . . . . . .
Door Mirror Switch Assembly (Control Switch, Fold-
ing Switch and Defogger Switch) Removal 8J±38
Installation 8J±38. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Door Mirror 8J±38. . . . . . . . . . . . . . . . . . . . . . .
General Description 8J±38. . . . . . . . . . . . . . . . . . . .
Removal and Installation 8J±38. . . . . . . . . . . . . . .
Power Window System 8J±39. . . . . . . . . . . . . . . . . .
General Description 8J±39. . . . . . . . . . . . . . . . . . . . . .
Power Window Switch Removal and
Installation 8J±39. . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Window Motor Removal and
Installation 8J±40. . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specifications 8J±41. . . . . . . . . . . . .
Service Precaution
WARNING: I F S O E Q U IPPED WITH A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS),
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON OR
NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.

SEAT BELT SYSTEM 9AÐ1
RESTRAINTS
CONTENTS
SEAT BELT SYSTEM
CONTENTS
Seat Belt System . . . . . . . . . . . . . . . . . . . . . . 9AÐ1
Supplemental Restraint System (SRS) . . . . . 9JÐ1Restraint Control System . . . . . . . . . . . . . . . . 9J1Ð1
Service Precaution . . . . . . . . . . . . . . . . . . . . . 9AÐ1
Seat Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ2
Front Seat Belt and Associated Parts
(Long Wheel Base) . . . . . . . . . . . . . . . . . . 9AÐ2
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ2
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ3
Front Seat Belt and Associated Parts
(Short Wheel Base) . . . . . . . . . . . . . . . . . . 9AÐ4
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ4
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ5
Rear Seat Belt and Associated Parts
(Long Wheel Base) . . . . . . . . . . . . . . . . . . 9AÐ6
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ6
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ7
Rear Seat Belt and Associated Parts
(Short Wheel Base) . . . . . . . . . . . . . . . . . . 9AÐ8
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ8
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ9
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ9
Third Seat Belt and Associated Parts
(Long Wheel Base) . . . . . . . . . . . . . . . . . . 9AÐ10
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ10
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ11Front Seat Buckle Assembly . . . . . . . . . . . . . 9AÐ12
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ12
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ12
Front Seat Buckle Assembly (W/Pretensioner)9AÐ12
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ12
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ12
Rear Center Seat Belt Buckle Assembly . . . 9AÐ13
Rear Center Seat Belt Buckle Assembly
and Associated Parts . . . . . . . . . . . . . . . . . 9AÐ13
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ13
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ13
Third Seat Belt Buckle and Lock Assembly . 9AÐ14
Third Seat Belt Buckle and Lock Assembly
and Associated Parts . . . . . . . . . . . . . . . . . 9AÐ14
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ14
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ14
Rear Seat Lock Assembly . . . . . . . . . . . . . . . 9AÐ15
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ15
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ15
Rear Seat Lock Assembly (Bench Type) . . . 9AÐ15
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ15
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ15
Rear Seat Strikers . . . . . . . . . . . . . . . . . . . . . 9AÐ16
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ16
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ16
Third Seat Striker . . . . . . . . . . . . . . . . . . . . . . 9AÐ16
Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ16
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 9AÐ16
Main Data and Specifications . . . . . . . . . . . . 9AÐ17
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fasteners joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fasteners.
When you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.

9AÐ12 SEAT BELT SYSTEM
Front Seat Buckle Assembly
Removal
1. Disconnect the battery ground cable.
2. Disconnect the seat belt warning connector (If so
equipped).
3. Remove the front seat buckle assembly(1).
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Fix the buckle to the rotation Ð stop position(2)
securely to install the front seat buckle assembly(1).
2. Tighten the buckle anchor bolt to the specified torque.
Torque: 39 Nám (4.0 kgám/29 lb ft)
1
760RW023
1
2
760RS005
Front Seat Buckle Assembly (W/Pretensioner)
Removal
1. Disconnect the battery ground cable.
2. Disconnect the pretensioner harness connector(3).
3. Remove the pretensioner cover(1).
4. Remove the front seat buckle assembly(2).
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Fix the buckle to the rotation Ð stop position securely
to install the front seat buckle assembly.
2. Connect the pretensioner harness connector.
3. Tighten the buckle anchor bolt to the specified torque.
Torque: 39 Nám (4.0 kgám/29 lb ft)
123
760RW030760RW029