1998 CHEVROLET CAMARO wheel

Downloaded from www.Manualslib.com manuals search engine To remove the jack and wheel wrench, loosen and
remove the bolt and remove the plastic
cover.
A
I
The tools you'll be using include the jack (A) and wheel
wrench
(B).
5-29

Downloaded from www.Manualslib.com manuals search engine The jack has a bolt at the end. Attach the wheel wrench
to
the jack bolt.
Turn the wheel wrench to the right to raise the lift head
a little.
If your wheel has a center cap, pry it off using the
wheel wrench.
If your vehicle has a bolt-on wheel cover, loosen the
plastic caps using the wheel wrench and remove the
wheel cover.
5-30

Downloaded from www.Manualslib.com manuals search engine I
Removing the Flat Tire and Installing the Spare Tire
1. Using the wheel wrench, loosen all the wheel nuts.
Don’t remove them yet.
If your vehicle has optional alloy wheels, each wheel
may have one locknut in place of the standard wheel
nut. A special wheel lock key (removal
tool) and
instructions are located in the center console. Attach the
wheel lock key
to the socket of the wheel wrench.
Remove the locking wheel nut by turning to the left.
2. Position the jack under the vehicle. There is a notch
in the vehicle’s rocker flange. Raise the jack head
until it fits firmly into the notch nearest the flat tire.
5-31

Downloaded from www.Manualslib.com manuals search engine /rl CAUTION:
Getting under a vehicle when it is jacked up is
dangerous.
If the vehicle slips off the jack, you
could be badly injured or killed. Never get under
a vehicle when it is supported only by a jack.
A CA TION:
Raising your vehicle with the jack improperly
positioned can damage the vehicle and even make
the vehicle fall.
To help avoid personal injury and
vehicle damage, be sure to
fit the jack lift head
into the proper location before raising
the vehicle.
3. Raise the vehicle by rotating the wheel wrench to the
right. Raise the vehicle
far enough off the ground so
there is enough room for the spare tire to fit.
Remove all the wheel nuts and take
off the flat tire.

Downloaded from www.Manualslib.com manuals search engine 4. Remove any rust or dirt
from the wheel bolts,
mounting surfaces and
spare wheel.
Never use oil or grease on studs or nuts. If you
do, the nuts might come loose. Your wheel could
fall off, causing a serious accident.
v-
1 CAUTION:
I
Rust or dirt on the wheel, or on the parts to
which
it is fastened, can make the wheel nuts
become loose after a time. The wheel could come
off and cause an accident. When you change a
wheel, remove any rust or dirt from the places
where the wheel attaches to the vehicle.
In an
emergency, you can use a cloth or
a paper towel
to
do this; but be sure to use a scraper or wire
brush later, if you need to, to get all the rust or
dirt
off.
5. Replace the wheel nuts with the rounded end of the
nuts toward the wheel. Tighten each nut by hand
until the wheel
is held against the hub.
5-34

Downloaded from www.Manualslib.com manuals search engine 7. Tighten the wheel nuts
firmly
in a crisscross
sequence as shown.
6. Lower the vehicle by rotating the wheel wrench left.
Lower the jack completely.
-
Incorrect wheel nuts or improperly tightened
wheel nuts can cause the wheel to become loose
and even come
off. This could lead to an accident.
Be sure to use the correct wheel nuts.
If you have
to replace them, be sure
to get new GM original
equipment wheel nuts.
Stop somewhere
as soon as you can and have the
nuts tightened with a torque wrench
to 100 lb-ft
(140 N.m).
5-35

Downloaded from www.Manualslib.com manuals search engine I
NOTICE:
Improperly tightened wheel nuts can lead to
brake pulsation and rotor damage.
To avoid
expensive brake repairs, evenly tighten the wheel
nuts in the proper sequence and
to the proper
torque specification.
Don’t try to put a wheel cover on your compact spare
tire. It won’t fit. Store the wheel cover in the rear
area until you have
the flat tire repaired or replaced.
I NOTICE:
Wheel covers won’t fit on your compact spare. If
you try to put a wheel cover on your compact
spare, you could damage the cover or the spare.
S+-ri~- - a F1 ’ or Spare Tire and Tools
Storing a jack, a tire or other t ~ lipment in the
passenger compartment
of the vehicle could
cause injury.
In a sudden stop or collision, loose
equipment could strike someone. Store all these
in the proper place.
5-36

Downloaded from www.Manualslib.com manuals search engine Replace the jack, wheel wrench and flat tire using the
storage instructions. When you replace the trim panel,
be
sure to tuck it under the weatherstrip.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Trim Panel
Bolt
Cover
Jack
Wing Nut Adapter
Compact Spare Tire
Full-Size Tire
Carpet Flap
Tire Storage Bolt