Page 3 of 37
TOWING
All types
Contents
SPECIFICATIONS
Engine - Clutch - Gearbox
Vehicle identification
01-1
01-2
LIFTING
Trolley jack - Axle stands
Underbody lifts
Page
01
02
03
General
vehicle
02-1
02-2
03-1
LUBRICANTS CONSUMABLES
Packaging
04-1
DRAINING FILLING
Engine
Gearbox
Power assisted steering
04
05
05-1
05-3
05-4
VALUES AND SETTINGS
Dimensions
Capacity - Grades
Belt tension
Accessories belt tension
Timing belt tension
Tightening the cylinder head
Tyres and wheels
Brakes
Brake limiter
Underbody heights
Values for checking the front axle
geometry
Values for checking the rear axle
geometry07
07-1
07-2
07-5
07-7
07-11
07-12
07-14
07-15
07-16
07-17
07-20
07-21
Page
Page 33 of 37
VALUES AND SETTINGS
Underbody heights
07
VehicleAt the front
H1 - H2 = ... mmAt the rear
H4 - H5 = ... mmDimension X (in mm)R-H and L-H
FC0X
KC0X73.5- 60.5 (1)
- 54.1 (2)402 (1)
430 (2)
Tolerance : ± 7.5 mm
The difference between the right-hand side and the left-hand side of the same axle of a vehicle must not ex-
ceed 5 mm, the driver’s side always being the higher.
Any adjustment of the underbody height means that the brake limiter and the headlights must be adjusted.
(1) Increased payload.
(2) Standard payload.
07-17
Page 34 of 37
VALUES AND SETTINGS
Underbody heights
07
12333R3
Dimension H5 is measured from the axis of the
suspension bar.
88636-4R
MEASUREMENT POINTS
07-18
Page 35 of 37
VALUES AND SETTINGS
Underbody heights
07
88637R
88576R
07-19
