1997 NISSAN FRONTIER maintenance schedule

[x] Cancel search: maintenance schedule

Page 165 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual Schedule 1
Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only
MAINTENANCE OPERATIONMAINTENANCE INTERVAL
Perform at number of miles, kilometers

Page 166 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual Schedule 1
Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only
MAINTENANCE OPERATIONMAINTENANCE INTERVAL
Perform at number of miles, kilometers

Page 167 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual Schedule 2
Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only
MAINTENANCE OPERATIONMAINTENANCE INTERVAL
Perform at number of miles, kilometers

Page 168 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual Schedule 2
Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only
MAINTENANCE OPERATIONMAINTENANCE INTERVAL
Perform at number of miles, kilometers

Page 169 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual EXPLANATION OF
MAINTENANCE ITEMS
Additional information on the following
items with ``* is found in the ``Do-it-
yourself operations section.
Emission control system
maintenance
Drive belts*Check

Page 193 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual prevent load shifts while driving.
cBe certain your outside mirrors conform
to all federal, state or local regulations. If
not, install any mirrors required for towing
before driving the vehicle.
Trai

Page 194 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual not use fifth gear (manual transmission)
or overdrive (automatic transmission).
cAvoid holding the brake pedal down too
long or too frequently. This could cause
the brakes to overheat, resulting in re

Page 200 of 204

NISSAN FRONTIER 1997 D22 / 1.G Owners Manual Heater operation ..................................... 3-4
Heater operation .......................................... 3-4
Hood release ............................................... 2-4
Hubs
Auto-lo
Page:   < prev 1-8 9-16 17-24 next >