1997 Mercury Villager ECU

196
[RR08000(ALL)01/93]
Installing the Removable Bucket Seats
[RR08100(ALL)01/93]
To position the bucket seats back in their original positions:
[RR08200(ALL)07/95]1.
Make sure the area around the floor anchor positions is free
from obstruction.
[RR08300(ALL)01/93]2.
With the seatback folded down, two people should lift the
seat into the vehicle.
[RR08400(ALL)01/93]3.
Place the seat slightly behind the floor anchor positions and
catch the rear leg anchors into each anchor position.
[RR08500(ALL)01/93]4.
Press down on the front of the seat to secure the front legs
to the two floor latch locks. Place the seatback in the upright
position.
[RR08600(ALL)01/93]5.
Try to move the seat to be sure that it is securely fastened.
[RR08650(ALL)06/95]6.
Replace any floor mats that were removed.
[RR08700(ALL)01/93]
Labels have been provided on the side of the seats to remind
you of important safety precautions.
[RR09000(ALL)01/93]
RWARNING
Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs
from engaging properly.
[RR09100(ALL)01/93]
RWARNING
Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

202
[RR10700(ALL)01/93]
RWARNING
After moving the third-row seat, be sure to latch the seat
in a passenger seating position. Improper location of the
seat will prevent correct use of the safety belts and will
increase the risk of severe injury in an accident. After
sliding the seat, check that both sides of the seat are
locked securely by attempting to move each side of the
seat forward and backward. This must be done before
the vehicle is put into motion in order to prevent
unintended movement of the seat and potential passenger
injuries.
[RR10800(ALL)09/95]
NOTE: Before rearranging the seats, remove any floor mats
that might be in the way.
[RR10900(ALL)01/93]
The three-passenger seat can be stored behind the second-row
seat(s) to provide extra cargo space in the rear of the vehicle.
[RR11000(ALL)01/93]
With the second row seat(s) removed, the three-passenger bench
seat can be moved all the way forward, just behind the front
seats for more room in the cargo area.
[RR11100(ALL)01/93]
To move the seat all the way forward:
[RR11200(ALL)01/93]1.
Lift up on the seat cushion release lever and fold up the seat
cushion.
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

206
[RR12200(ALL)04/95]3.
Make sure the seat securely latches in the lock position of
both seat tracks before driving with the rear seat in this
position.
[RR12300(ALL)09/93]
24 pica art:0040135-B
The three-passenger seat in the fully forward locked position
File:07vxrrn.ex
Update:Thu May 30 09:53:21 1996

222
[GF08600(ALL)01/96]
13-1/2 pica
art:0040281-A
The parking brake
*
[GF08700(ALL)01/96]
RWARNING
When parking, do not use the gearshift in place of the
parking brake. Always set the parking brake fully and
make sure that the gearshift is securely latched in Park
(P). Turn off the ignition whenever you leave your
vehicle. Never leave your vehicle unattended while it is
running. If you do not take these precautions, your
vehicle may move unexpectedly and injure someone.
[GF08800(ALL)01/96]
To release the parking brake, press the brake pedal with your
right foot and hold it while you lift up on the parking brake
release handle.
*
[GF08900(ALL)02/96]
RWARNING
If the parking brake is fully released, but the Brake
System light remains on, have the brakes checked
immediately. They may not be working properly.
File:09vxgfn.ex
Update:Thu May 30 09:54:10 1996

224
%*
[GF09200(ALL)01/96]
Automatic Transaxle Operation
%*
[GF09300(ALL)05/96]
Putting Your Vehicle in Gear
[GF09400(ALL)01/96]
Your vehicle's gearshift lever is on the steering column. The
OVERDRIVE OFF/ON button is located at the end of the
gearshift lever. You can put the gearshift lever in any one of
several positions.
[GF09500(ALL)05/96]
10-1/2 pica
art:0040163-G
The steering column gearshift lever positions
*
[GF09600(ALL)05/96]
RWARNING
Hold the brake pedal down while you move the gearshift
lever from position to position. If you do not hold the
brake pedal down, your vehicle may move unexpectedly
and injure someone.
*
[GF09700(ALL)01/96]
Once you place the gearshift lever securely into position,
gradually release the brake pedal and use the accelerator as
necessary.
File:09vxgfn.ex
Update:Thu May 30 09:54:10 1996

228
*
[GF10750(ALL)01/96]
N (Neutral)
*
[GF10760(ALL)09/95]
In N (Neutral), the wheels of the transaxle are not locked. Your
vehicle will roll freely, even on the slightest incline, unless the
parking brake or brakes are on.
*
[GF10800(ALL)01/96]
Parking
*
[GF10850(ALL)01/96]
Always come to a complete stop before you shift into P (Park).
This position locks the transaxle and prevents the front wheels
from turning. To securely latch the gearshift in the P (Park)
position, pull it toward you, push it completely
counterclockwise against the stop, and then push it toward the
instrument panel.
[GF10870(ALL)01/96]
The gearshift is securely latched in Park (P) if you cannot rotate
it in a clockwise direction without lifting it toward you.
*
[GF10900(ALL)05/96]
RWARNING
Always set the parking brake fully and make sure the
gearshift is latched in P (Park). Turn off the ignition
whenever you leave your vehicle.
*
[GF11000(ALL)05/96]
RWARNING
Never leave your vehicle unattended while it is running.
*
[GF11100(ALL)05/96]
Forced Downshifts
[GF11110(ALL)01/96]
To gain extra acceleration in Drive (D) (when passing another
vehicle) push the accelerator to the floor. The transaxle will
automatically downshift to the appropriate gear - third, second
or first.
File:09vxgfn.ex
Update:Thu May 30 09:54:10 1996

Driving
241
%*
[GF22960(ALL)01/96]
Four Season Roof Rack (If equipped)
[GF22970(ALL)01/96]
Always load your luggage as far back as it will safely go on the
four season roof rack. Do not load more than 100 pounds
(45 kg). Be careful that your vehicle does not exceed the Gross
Vehicle Weight Rating (GVWR) or its Gross Axle Weight Rating
(GAWR front and rear). The GVWR and GAWR are located on
the Safety Compliance Certification Label (located on the
driver's door pillar).
[GF22980(ALL)01/96]
7-1/2 pica art:0040114-D
The four season roof rack
[GF22990(ALL)01/96]
The front and rear cross-bars can be adjusted forward and
backward. Place your luggage between the bars, adjust the bars,
and secure the luggage with rope to the bars. There are also
adjustable loops on the side bars for the rope attachment.
*
[GF23000(ALL)01/96]
RWARNING
Be sure that items on the roof rack are securely fastened.
File:09vxgfn.ex
Update:Thu May 30 09:54:10 1996

Roadside Emergencies
259
*
[ER00615(ALL)01/96]
10-1/2 pica
art:0040173-B
Removing the spare tire retainer
*
[ER00620(ALL)01/96]
Stowing the spare tire
[ER00625(ALL)05/96]1.
To raise the tire to the stowed position, lay the tire on the
ground with the inboard side facing up. Install the retainer
through the wheel center and slide the tire under the vehicle.
Fit the hex-shaped end of the lug wrench over the hex nut
in the floor of the cargo area. Turn the lug wrench clockwise
until the tire is raised to its original position underneath the
vehicle.
[ER00630(ALL)01/96]
NOTE: The lug wrench ratchets when the tire is raised to the
stowed position. It will not allow you to over-tighten.
*
[ER00635(ALL)01/96]2.
Check for proper seating against the underbody supports
and retighten if necessary.
*
[ER00640(ALL)01/96]
RWARNING
Make sure the spare tire and jacking equipment are
stowed and secured in the proper storage location.
File:10vxern.ex
Update:Thu May 30 09:55:50 1996