1997 Mercury Villager window

Controls and Features
69
[CF09300(ALL)01/96]
The display window and the function selector buttons indicate
how the system is operating. The display window shows the
selected temperature and displays AUTO if you are operating in
the AUTOMATIC mode. If you override the automatic mode by
selecting any of the function selector buttons, AUTO no longer
appears in the display window and the appropriate function
selector button(s) illuminate. The display window also indicates
manual (thumbwheel) control of the fan speed when a
His
shown.
[CF09400(ALL)01/96]
Automatic Operation
[CF09450(ALL)01/96]
Push the AUTOMATIC button and select the desired
temperature. The selected temperature and AUTO appear in the
display window. The ATC heats or cools to achieve the set
temperature. It is important to note that if the ATC engages
your vehicle's air-conditioning, it will do so automatically
without illuminating the A/C button.
[CF09500(ALL)05/96]
When in AUTOMATIC and weather conditions require heat, air
is sent to the floor. However, a feature is included in the ATC
to prevent blowing cold air to the floor if the engine coolant is
not warm enough to provide heating. Within three or four
minutes (of determining the engine coolant is warm enough),
the fan speed gradually increases and airflow changes to the
floor.
[CF09600(ALL)05/96]
If specific conditions exist (such as window fogging), the five
override buttons allow specific airflow selection. The
thumbwheel allows you to adjust the fan speed to suit your
needs.
[CF09700(ALL)01/96]
Temperature Selection
[CF09800(ALL)01/96]
The
dTEMP
cbutton on the left side of the control panel is
for temperature selection. The
dside lowers the set
temperature, and the
cside raises the set temperature. Press
and hold either side of the button to rapidly change the
temperature setting in one degree increments to either65ÊF
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

70(18ÊC) or 85ÊF (29ÊC).Then, the set temperature jumps 5ÊF and
stops at either60ÊF (16ÊC),which is maximum cooling, or90ÊF
(32ÊC),which is maximum heating.
[CF09850(ALL)05/96]
Changing the Display Mode (English/Metric)
[CF09860(ALL)03/96]
To switch between the English and Metric display mode, press
the DEFROST and A/C buttons simultaneously while rotating
the fan speed dial upward until it stops moving. After one
second, the display will begin to toggle between English and
Metric.
[CF09900(ALL)01/96]
Fan Speed and Thumbwheel
[CF09925(ALL)01/96]
The ATC automatically adjusts the fan speed to the existing
conditions. To control the fan speed yourself, use the
thumbwheel located at the extreme right side of the ATC
control panel. Using the thumbwheel cancels the automatic fan
speed control, and causes a
Hto appear in the display window.
Rotate the thumbwheel up for HI speeds and down for LO
speeds.
[CF09960(ALL)01/96]
To return to auto fan control, press the AUTOMATIC button.
[CF10000(ALL)01/96]
Airflow Function Selector Buttons
[CF10100(ALL)01/96]
Your ATC has five buttons which allow you to make special
selections for airflow. The buttons are grouped in the middle of
the ATC panel and allow you to determine airflow location.
Pressing any of the function selector buttons illuminates the
button pushed and directs airflow to the appropriate location.
The temperature of the airflow will still be automatically
controlled. Return to fully automatic operation by pushing the
AUTOMATIC button.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
71
[CF10200(ALL)01/96]
P
[CF10300(ALL)05/96]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window shows the set temperature. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
[CF10400(ALL)01/96]
V
[CF10500(ALL)01/96]
Press this button to obtain maximum airflow to the windshield.
Adjust the temperature setting as required for defrosting. The
Vindicator light illuminates and the display window shows
the set temperature. When the outside temperature is about50ÊF
(10ÊC) the air conditioning functions in order to dehumidify the
air to prevent window fogging.
[CF10600(ALL)01/96]
Q
[CF10700(ALL)05/96]
Push this button to select airflow through the instrument panel
registers. TheQindicator light illuminates and the display
window shows the set temperature. The ATC heats the air if the
selected temperature is warmer than the outside air coming into
the vehicle. However, the air is not cooled below the
temperature outside of the vehicle regardless of the temperature
setting unless the A/C button is pushed.
[CF10800(ALL)01/96]
S
[CF10900(ALL)05/96]
Push this button for air from the floor and instrument panel
registers at the same time. TheSindicator light illuminates
and the display window shows the set temperature. The ATC
heats the air if the selected temperature is warmer than the
outside air coming into the vehicle. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

72
[CF11000(ALL)01/96]
R
[CF11100(ALL)05/96]
Push this button to direct airflow to the floor. TheRindicator
light illuminates and the display window shows the set
temperature. The ATC heats the air if the selected temperature
is warmer than the outside air coming into the vehicle.
However, the air is not cooled below the temperature outside of
the vehicle regardless of the temperature setting unless the A/C
button is pushed.
[CF11200(ALL)01/96]
Air Conditioning and Air Recirculation
[CF11300(ALL)01/96]
Activate the air conditioning in any of the function selector
override modes by pressing the A/C button. The A/C indicator
light on the button illuminates to verify activation, and cooled
air flows from the vents. Fan speed continues to be controlled
by the ATC unless the fan speed thumbwheel is used to
override the ATC.
[CF11400(ALL)01/96]
Press theMbutton to choose air recirculation. In this mode
the ATC system recirculates the air inside the vehicle rather
than drawing air from outside. Use this mode together with the
air conditioning to rapidly cool the inside of the vehicle or to
dehumidify the air inside the vehicle.
[CF11500(ALL)01/96]
Rear Passenger Compartment Climate Control System
with Front Passenger ATC
[CF11600(ALL)01/96]
If your vehicle is equipped with ATC, the rear passenger
compartment will also have climate controls so that rear seat
occupants can select their own personal climate comfort level.
[CF11700(ALL)01/96]
The rear seat climate control system is controlled from the main
ATC system on the instrument panel. If the front ATC system is
off, the rear system will also be off. Also, if the rear seat climate
control lever is set in OFF, the rear climate controls are turned
off.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

74
*
[CF12100(ALL)01/96]
Liftgate Window Features
%*
[CF12200(ALL)01/96]
Rear Window Defogger (If equipped)
*
[CF12300(ALL)01/96]
The defogger for the rear liftgate window clears frost, fog, or
thin ice from both the inside and outside of the rear window.
The defogger operates with the ignition in the ON position.
[CF12400(ALL)01/96]
If your vehicle is equipped with heated exterior mirrors, they
activate when the rear window defogger is switched on.
*
[CF12500(ALL)03/96]
The control switch is located on the instrument panel to the
right of the steering column.
[CF12600(ALL)03/96]
13-1/2 pica art:0040073-E
Rear window defogger switch location
*
[CF12700(ALL)05/96]
Before using the defroster, clear away any snow that is on the
rear window and outside rearview mirrors. With the engine
running, push the defroster button.
*
[CF12800(ALL)01/96]
After approximately 10 minutes, the defroster will turn off. If
the window or mirrors are still not clear, turn the defroster on
again.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
75
*
[CF12900(ALL)01/96]
The defroster will turn off when the ignition key is turned to
the OFF or START position.
*
[CF13000(ALL)01/96]
Never use sharp instruments or abrasive window cleaners to
clean the inside of your rear window. If you do, you may
damage the wires that are bonded to the inside of the rear
window, and cause damage to the rear window defogger.
[CF13100(ALL)01/96]
Rear Wiper and Washer
[CF13200(ALL)01/96]
The controls for the rear wiper and washer can also be found
on the instrument panel to the right of the instrument cluster.
The rear wiper and washer controls operate with the ignition in
the ACC and ON positions.
[CF13300(ALL)01/96]
13-1/2 pica
art:0040080-D
Rear wiper and washer switch locations
[CF13400(ALL)01/96]
To turn on the rear wiper, press the RR WIPER switch. The
wiper will operate until it is turned off. The wiper will complete
one cycle every 10 to 15 seconds. To turn off the rear wiper,
press the RR WIPER switch a second time.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

98
[CF28500(ALL)01/96]
Automatic Door Lock
[CF28600(ALL)01/96]
If your vehicle is equipped with the optional power door locks,
locking the driver's door with the key or with the manual
rocker switch will also lock all other doors. However, when the
driver's door is unlocked, with the key or with the manual
rocker switch, other doors remain locked.
[CF28700(ALL)01/96]
Anti-Lockout
[CF28800(ALL)01/96]
Your vehicle is equipped with an anti-lockout feature which
prevents the driver's side door from being locked while the key
is in the ignition. To lock the driver's side door, remove the key
from the ignition and then use either the manual rocker switch
or the door lock cylinder.
[CF28900(ALL)01/96]
Accessory Delay (If equipped)
[CF29000(ALL)01/96]
Accessory Delay is a feature that allows vehicles equipped with
power windows and the power sunroof to operate all power
windows and the power sunroof for 15 minutes after the
ignition is turned to OFF or until the driver's door is opened
(after ignition is turned to OFF).
*
[CF29100(ALL)01/96]
Sliding Door
*
[CF29200(ALL)01/96]
The sliding door allows rear seat passengers to enter and exit
easily.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
103
%*
[CF31200(ALL)01/96]
Liftgate
[CF31300(ALL)01/96]
Opening the Liftgate
[CF31400(ALL)01/96]
To unlock the liftgate with the key, insert the key into the lock
and turn it counterclockwise. To make the gate swing up to the
fully opened position, pull back and upward on the handle. The
liftgate will not unlock if the optional liftgate window is open.
[CF31500(ALL)01/96]
17-1/2 pica art:0040121-F
Opening the liftgate
[CF31600(ALL)01/96]
You can also unlock the liftgate using the optional power door
lock system, or the optional keyless entry system. However, it
cannot be opened until you release the latch by reaching under
the license plate light shield and lifting up on the handle.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996