1997 Mercury Villager wheel

86
*
[CF19400(ALL)01/96]
Ignition
%*
[CF19500(ALL)01/96]
Understanding the Positions of the Ignition
[CF19600(ALL)01/96]
Your vehicle's ignition has four positions. They are:
*
[CF19700(ALL)01/96]
13-1/2 pica
art:0040047-D
The ignition positions
[CF19750(ALL)05/96]
OFF/LOCK allows you to shut off the engine and all accessories
and locks the gearshift lever. Removing the key then locks the
steering wheel.
[CF19775(ALL)05/96]
ACCESSORY allows you to operate some of your vehicle's
electrical accessories while the engine is not running. For
example, you can use ACCESSORY to turn on the radio,
windshield wipers, or operate the cigarette lighter without
starting the engine.
*
[CF19800(ALL)01/96]
ON allows you to test your vehicle's warning lights to make
sure they work before you start the engine. The key returns to
the ON position once the engine is started and remains in this
position while the engine runs.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
91
%*
[CF23300(ALL)01/96]
Tilt Steering
*
[CF23400(ALL)02/96]
RWARNING
Never adjust the steering wheel when the vehicle is
moving.
[CF23500(ALL)01/96]
17-1/2 pica art:0040089-E
Tilt release lever location
[CF23600(ALL)01/96]
To change the position of the steering column, pull the release
lever on the column down. Move the steering wheel to the
desired position and raise the lever to lock the steering wheel in
place.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

92
%*
[CF23700(ALL)03/96]
Speed Control (If equipped)
[CF23800(ALL)01/96]
The speed control system allows your vehicle to maintain a set
speed above 30 mph (48 km/h) without keeping your foot on
the accelerator pedal.
[CF23900(ALL)01/96]
Avoid using the speed control when driving under the
following conditions:
[CF23950(ALL)05/96]
n
it is not possible to keep the vehicle at a set speed
[CF23975(ALL)01/96]
n
in heavy traffic or in traffic that varies in speed
[CF24000(ALL)01/96]
n
on winding or hilly roads
[CF24100(ALL)01/96]
n
on slippery roads (rain, snow, ice, etc.)
[CF24150(ALL)01/96]
n
in very windy areas
[CF24200(ALL)01/96]
To activate the speed control, push the main switch (CRUISE
CONT. ON); the switch is located in the group of controls to
the left of the steering wheel. The indicator light on the switch
will come on.
[CF24300(ALL)01/96]
13-1/2 pica
art:0040091-B
Speed control main switch location
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
93
[CF24400(ALL)01/96]
Setting the Speed Control
[CF24500(ALL)01/96]
To set the speed control, accelerate your vehicle to the desired
speed (at least 30 mph [48 km/h]), push and release the
COAST/SET button on the left side of the steering wheel. The
CRUISE light in the instrument cluster will come on. Take your
foot off the accelerator pedal. Your vehicle will maintain the set
speed.
[CF24600(ALL)01/96]
24 pica art:0040090-F
Speed control buttons on the steering wheel
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

94
%*
[CF24700(ALL)05/96]
Accelerating With the Speed Control Operating
[CF24800(ALL)01/96]
To pass another vehicle while the speed control is activated,
press the accelerator pedal. When you release the pedal, the
vehicle will return to the previously set speed.
[CF24900(ALL)01/96]
Driving Uphill or on a Steep Grade
[CF25000(ALL)01/96]
The vehicle may not maintain the set speed when going up or
down steep hills. If this happens, drive without the speed
control.
[CF25100(ALL)05/96]
When driving uphill, especially with a heavy load, you may
notice your speed decreasing, even if you have the speed
control set. If the speed drops more than 8 mph (13 km/h), it is
normal for the automatic speed control feature to be cancelled.
You may need to help your vehicle maintain the desired speed
by driving without the speed control when driving up steep
grades.
[CF25200(ALL)01/96]
Cancelling the Speed Control
[CF25300(ALL)01/96]
To cancel the preset speed, follow one of these three methods:
[CF25400(ALL)01/96]
n
Push the CANCEL button on the left side of the steering
wheel; the CRUISE light will go out.
[CF25500(ALL)01/96]
n
Tap the brake pedal; the CRUISE light will go out.
[CF25600(ALL)01/96]
n
Press the main OFF switch to the left of the steering wheel.
Both the CRUISE CONT. ON switch indicator and the
CRUISE light in the instrument cluster will go out.
[CF25700(ALL)01/96]
If you unintentionally press the brake pedal while pushing the
RESUME/ACCEL button to reset the cruising speed, press the
OFF switch once and then reactivate the system by pressing the
CRUISE CONT. ON switch.
[CF25800(ALL)01/96]
The speed control will automatically be canceled if the vehicle
slows down below approximately 8 mph (13 km/h).
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

96
[CF26840(ALL)05/96]
The CRUISE indicator light may blink if the CRUISE CONT.
ON switch is pressed while pushing the RESUME/ACCEL,
COAST/SET, or CANCEL buttons located on the left side of the
steering wheel.
[CF27000(ALL)01/96]
Power Sunroof (If equipped)
[CF27100(ALL)01/96]
The power sunroof controls are found in the overhead console.
The power sunroof operates with the ignition in the ON
position.
[CF27200(ALL)01/96]
7-1/2 pica art:0040103-A
Power sunroof controls
[CF27300(ALL)01/96]
To open the sunroof, press and hold the OPEN side of the
switch. Release the switch when the sunroof reaches the desired
position. To close the sunroof, press the CLOSE side of the
switch.
[CF27400(ALL)01/96]
When the sunroof panel is closed, you can raise the sunroof to
the vent position by pressing the UP side of the switch. To
lower the sunroof from the vent position, press the DOWN side
of the switch.
*
[CF27500(ALL)01/96]
RWARNING
Do not let children play with the moon roof. They may
seriously hurt themselves.
[CF27600(ALL)01/96]
Remove any snow, water or other foreign matter from the
sunroof before you open it.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
111
%*
[CF35200(ALL)01/96]
Dual Electric Remote Controlled Mirrors (If equipped)
[CF35300(ALL)01/96]
If you have power side view mirrors, you can adjust them in
any direction by using the mirror controls on the instrument
panel. This switch operates with the ignition in ON or ACC.
[CF35400(ALL)01/96]
The mirror control switch is on the instrument panel to the left
of the steering wheel.
*
[CF35500(ALL)05/96]
To adjust the remote controlled side mirrors:
[CF35600(ALL)05/96]1.
Select the right or left mirror by moving the selector switch
to R or L.
*
[CF35700(ALL)01/96]2.
Move the control knob in the direction you want to move
the mirror.
[CF35800(ALL)01/96]3.
Return the selector switch to the middle position to keep the
mirror in place.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

118
[CF76100(ALL)01/96]6.
Press the LOCK button on a new remote transmitter. The
instrument panel lights will flash twice, indicating code is
entered.
[CF76200(ALL)01/96]7.
Repeat steps 5 and 6 as needed (up to four remote
transmitters may be programmed).
[CF76300(ALL)01/96]
Anti-Theft System (If equipped)
[CF76400(ALL)05/96]
This system helps protect your vehicle against break-ins or theft
by monitoring all doors, the hood and the liftgate lock cylinder.
%*
[CF76500(ALL)01/96]
When an unauthorized entry occurs, the system triggers and
will:
[CF76600(ALL)01/96]
n
flash the headlamps and hazard lamps
*
[CF76700(ALL)01/96]
n
honk the horn
*
[CF76800(ALL)01/96]
n
disable the starting circuit to prevent the vehicle from being
started
[CF76900(ALL)01/96]
To arm the system
*
[CF77000(ALL)01/96]1.
Remove the key from the ignition.
[CF77100(ALL)05/96]2.
Lock the doors by using either the power door lock switch
or by turning the key in either the driver or passenger door
lock cylinder. The parking lights will flash and the horn
chirps to let you know that the system has been armed. The
anti-theft indicator light on the right side of the steering
wheel will light and remain on.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996