GF54.21-P-4106-01GH
Extended Activity Module - Task
n
The primary tasks of the Extended Activity Module (EAM, N10/1) are
as follows:
D
To control the door sill lights
D
To suppress the auto-dimming mirror function
D
To control the headlight cleaning system (HCS)
D
To control the rear window defroster
D
To control seat heating
D
To control the power supply via control console to tilt/sliding or
louvered sunroof switch
D
To control the PTC heater booster (R22/3)
D
To control the auxiliary fan (M4)
D
To read the cruise control switch (S40) and relay data to control
module (DAS, N73/1)
D
To read the contacts for wiper speed settings 1 and 2 on
combination switch (S4) for diagnosis.
To perform these tasks the Extended Activity Module (EAM, N10/1)
reads various signals and switch settings directly.
The Extended Activity Module (EAM, N10/1) interfaces with other
control modules via the engine compartment CAN.
-----------------------------------------------------------------------------------------
Diagnosis
Diagnosis is performed using the Star diagnostic tool. To facilitate
this task, the Extended Activity Module (EAM, N10/1) is equipped
with its own diagnostics cable.
This cable is also used to diagnose the
All Activity Module (AAM,
N10)
and the
transfer case control module (N78)
.
The Extended Activity Module (EAM, N10/1) is linked to the All
Activity Module (AAM, N10) via the
engine compartment CAN
.
Data communication between the All Activity Module (AAM,
N10) and the Extended Activity Module (EAM, N10/1) is
assumed by the
CAN (N10 - N10/1)
when terminal 15 is off.
The CAN (N10 - N10/1)
is an independent CAN bus located
between the All Activity Module (AAM, N10) and the Extended
Activity Module (EAM, N10/1).
No other
control modules are
connected to the CAN (N10 - N10/1).
-----------------------------------------------------------------------------------------
Details:
Door sill lights
When the front interior light is on and one of the front doors is open,
or when the rear interior light is on and one of the back doors is open,
the door sill lights for the open door will illuminate.
Headlight cleaning system (HCS)
Activating a separate switch causes the EAM to send a turn-on signal
to the HCS pump relay.
EAM will send an additional turn-on signal to the HCS pump relay
only after the cleaning operation is completed and a "rest period" of
approximately 2.5 sec. has passed.
Auto-dimming mirror function
The auto-dimming mirror function is suppressed when the interior
light is on or reverse gear is engaged.
Auto-dimming suppression for the outside rearview mirror (slave) is
activated by the inside rearview mirror (master).
Heater booster/PTC air heater for diesel engines
EAM monitors system voltage and adjusts heater booster capacity to
minimize load on battery.
Rear window defroster
EAM sets maximum ON time for rear window defroster depending
on outdoor temperature and current vehicle speed.
D
Standard ON time:
10 min.
D
Outdoor temperature < 5
o
C:
Additional 5 min.
D
Speed >80 km/h:
Additional 3 min.
Seat heating
Sets maximum seat heating time.
D
Setting 1: max. 20 min.
D
Setting 2: max. 5 min.
Tilt/sliding or louvered sunroofs
Signal via AAM2 allows operation of tilt/sliding or louvered sunroofs
when ignition is on (standard mode) or off (keyless mode).
Ignition authorization via CAN
The EAM issues ignition authorization to AAM2 via the engine
compartment CAN depending on the requirements of the engine
control unit in connection with the FBM.
Copyright DaimlerChrysler AG 18.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1
MISCELLANEOUS
MISCELLANEOUS LOCATION
CONNECTORS
CONNECTORS LOCATION
Parking Brake SwitchOn parking brake support bracket.
Passenger's Seat Belt SwitchIn passenger's seat belt buckle.
Release Switch (BAS)Integral to brake booster.
Right Front Seat Belt Buckle SwitchIn passenger's seat belt buckle.
Rotary Tumbler Trunk Lid MicroswitchPart of tailgate latch assembly.
Stoplight SwitchOn brake pedal support.
ComponentComponent Location
Alarm HornIn left rear corner of engine compartment.
Alarm Siren W/ Auxiliary BatteryIn left rear corner of engine compartment.
Antenna Coil (Left)At left side of rear window, behind trim.
Antenna Coil (Right)At right side of rear window, behind trim.
Antenna SplitterOn right side of liftgate.
Audio AmplifierBehind left side of dash.
Blower Motor Preresistor GroupUnder right side of dash, in blower assembly.
Data Link Connector (DLC)Below left side of dash.
Diagnostic Module (OBD II) Scan Tool ConnectorBelow left side of dash.
Driver's ETR SquibOn base of left "B" pillar, behind trim.
FM/AM AmplifierIn liftgate, behind trim.
Front Passenger ETR SquibOn base of right "B" pillar, behind trim.
Garage Door TransmitterOn front center of roof.
Hands-Free MicrophoneOn front center of roof.
Low Beam Headlight Relay Shorting ClipIn left side of engine compartment, in fuse & relay
box.
Recirculated Air Flap ElementBehind right side of dash.
Transponder CoilTop right side of steering column, on ignition
switch.
ComponentComponent Location
X2/4 (Black, 2-Pin)Behind radio.
X11/4 (Black, 16-Pin)Below left side of dash.
X18 (Red, 28-Pin)Behind center of dash.
X18/1 (Black, 9-Pin)Under tailgate trim.
X18/A_B (Black, 16-Pin)At right kick panel.
X18/2 (1) (White, 10-Pin)At left rear of engine compartment.
X18/2 (2) (4-Pin)At left rear of engine compartment, in E-box.
2001 Mercedes-Benz ML320
2001 MERCEDES-BENZ ML320 & ML430
me
Saturday, October 02, 2010 3:21:17 PMPage 6 © 2006 Mitchell Repair Information Company, LLC.
Check values for cylinder bore
Permissible
deviation of
cylinder shapemm0.0140.007
contact surface
peak-to-valley
heightµm--
NumberDesignation
Engine
112.910/ 911
Engine
112.913/920/921/922/
923/940/941/942/943/
944/945/949
113.940/941/942/943/945
BE01.40-P-
1001-01FCylinder dia.Standard
marking Xmm83.200...83.21589.900...89.915
Auxiliary stage
Marking mm83.250...83.26583.250 ... 83.265
Repair sizemm90.150 ...
90.16590.150...90.165
BE01.40-P-
1002-01FCylinder dia.,
setting for
repair size
(+0.25)Pre-honingmm83.20089.900
Precision
honingmm83.38090.080
Polishingmm83.43090.130
BE01.40-P-
1003-01FCylinder dia.
according to
machining
phasePre-honingmm83.38090.080
Precision
honingmm83.43090.130
Polishingmm90.150 ...
90.16590.150...90.165
BE01.40-P-
1004-01FCylinder lengthmm129.5129.5
BE01.40-P-
1005-01FUndercutmm1212
BE01.40-P-
1006-01FStroke setting with 70 mm
stone length on 70th stroke
scale of machinemm130130
BE01.40-P-
1007-01FStone overrun at top and
bottommm9.59.5
BE01.40-P-
1008-01FEngine speedPre-honingrpm125125
Precision
honingrpm125125
Polishingrpm125125
Lappingrpm230230
BE01.40-P-
1009-01FFeedPre-honing44
Precision honing33
2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:57 PMPage 121 © 2006 Mitchell Repair Information Company, LLC.
Check values for cylinder bore
Polishing22
Lapping11
BE01.40-P-
1010-01FStrokePre-honingrpm5757
Precision
honingrpm5757
Polishingrpm5757
Lappingrpm8080
BE01.40-P-
1011-01FDisplayPre-honing%20 to 3020 to 30
Precision
honing%20 to 3020 to 30
Polishing%20 to 3020 to 30
Lapping%20 to 3020 to 30
BE01.40-P-
1012-01FStroke setting with 70 mm felt
length on 70th stroke scale of
machinemm115115
BE01.40-P-
1013-01FFelt insert overrun at top and
bottommm2 to 42 to 4
BE01.40-P-
1014-01FOperating time of honing
machineS4040
NumberDesignation
Engine
112.951/961
Engine 112.970
BE01.40-P-
1001-01FCylinder dia.Standard
marking Xmm89.900...89.91597.000 to 97.015
Auxiliary stage
Marking mm89.950 to 89.96597.050 to 97.065
Repair sizemm90.150...90.16597.250 to 90.165
BE01.40-P-
1002-01FCylinder dia.,
setting for repair
size (+0.25)Pre-honingmm-97.000
Precision honingmm-97.180
Polishingmm-97.230
BE01.40-P-
1003-01FCylinder dia.
according to
machining phasePre-honingmm-97.180
Precision honingmm-97.230
Polishingmm-97.250 ... 97.265
BE01.40-P-
1004-01FCylinder lengthmm-130.90 to 131.00
BE01.40-P-
1005-01FUndercutmm-0.6...1.0
BE01.40-P-
1006-01FStroke setting with 70 mm stone
length on 70th stroke scale of
machinemm-132
BE01.40-P-
1007-01FStone overrun at top and bottommm-9.5
2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:57 PMPage 122 © 2006 Mitchell Repair Information Company, LLC.
Check values for cylinder bore
BE01.40-P-
1008-01FEngine speedPre-honingrpm-125
Precision honingrpm-125
Polishingrpm-125
Lappingrpm-230
BE01.40-P-
1009-01FFeedPre-honing-4
Precision honing-3
Polishing-2
Lapping-1
BE01.40-P-
1010-01FStrokePre-honingrpm-57
Precision honingrpm-57
Polishingrpm-57
Lappingrpm-80
BE01.40-P-
1011-01FDisplayPre-honing%-20 to 30
Precision honing%-20 to 30
Polishing%-20 to 30
Lapping%-20 to 30
BE01.40-P-
1012-01FStroke setting with 70 mm felt
length on 70th stroke scale of
machinemm-115
BE01.40-P-
1013-01FFelt insert overrun at top and
bottommm-2 to 4
BE01.40-P-
1014-01FOperating time of honing machineS-70
NumberDesignation
Engine
112.946/947/
948/960
Engine 112.912
BE01.40-P-
1001-01FCylinder dia.Standard
marking Xmm89.900...89.91583.200...83.215
Auxiliary stage
marking mm89.950 to 83.26583.250...83.265
Repair sizemm90.150...90.16583.450 to 83.465
BE01.40-P-
1002-01FCylinder dia.,
setting for repair
size (+0.25)Pre-honingmm89.90083.200
Precision honingmm90.08083.380
Polishingmm90.13083.430
BE01.40-P-
1003-01FCylinder dia.
according to
machining phasePre-honingmm90.08083.380
Precision honingmm90.13083.430
Polishingmm90.150...90.16583.450 to 83.465
BE01.40-P-
1004-01FCylinder lengthmm129.5129.5
BE01.40-P-Undercutmm1212
2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:57 PMPage 123 © 2006 Mitchell Repair Information Company, LLC.
Check values for cylinder bore
1005-01F
BE01.40-P-
1006-01FStroke setting with 70 mm stone
length on 70th stroke scale of
machinemm130130
BE01.40-P-
1007-01FStone overrun at top and bottommm9.59.5
BE01.40-P-
1008-01FEngine speedPre-honingrpm125125
Precision honingrpm125125
Polishingrpm125125
Lappingrpm230230
BE01.40-P-
1009-01FFeedPre-honing44
Precision honing33
Polishing22
Lapping11.
BE01.40-P-
1010-01FStrokePre-honingrpm5757
Precision honingrpm5757
Polishingrpm5757
Lappingrpm8080
BE01.40-P-
1011-01FDisplayPre-honing%20 to 3020 to 30
Precision honing%20 to 3020 to 30
Polishing%20 to 3020 to 30
Lapping%20 to 3020 to 30
BE01.40-P-
1012-01FStroke setting with 70 mm felt
length on 70th stroke scale of
machinemm115115
BE01.40-P-
1013-01FFelt insert overrun at top and
bottommm2 to 42 to 4
BE01.40-P-
1014-01FOperating time of honing machineS4040
NumberDesignation
Engine
113.960/961/
962/963/964/
965/967/968/
971/980/981/
982/984/987/
988/989/990/
991/992/993/ 995
BE01.40-P-1001-
01FCylinder dia.Standard marking Xmm97.000 to 97.015
Auxiliary stage
Marking mm97.050 to 97.065
Repair sizemm97.250 to 97.265
2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:57 PMPage 124 © 2006 Mitchell Repair Information Company, LLC.
Check values for cylinder bore
Fig. 102: Identifying Dial Indicator (001 589 53 21 00)
Commercially available tools
OIL PAN BOLT DIAGRAM - AR01.45-P-7500-06F
Upper part of oil pan shown on engine 112 with 4 MATIC
NumberDesignation
965/967/968/
971/980/981/
982/984/987/
988/989/990/
991/992/993/ 995
BE01.40-P-1001-
01FCylinder dia.Standard Marking Xmm97.000 to 97.015
Auxiliary stage
Marking mm97.050 to 97.065
Repair sizemm97.250 to 97.265
NumberDesignation
Engine
112.910/ 911
Engines
112.913/920/921/922/
923/940/941/942/943/
944/945/949
113.940/941/942/943/
945
BE01.40-P-
1001-01FCylinder dia.Standard
Marking Xmm83.200...83.21589.900...89.915
Auxiliary stage
Marking mm83.250...83.26589.950 to 83.265
Repair sizemm83.450 to
83.46590.150...90.165
NumberDesignation
WH58.30-Z-1001-12AQuick calipers for internal measurements
WH58.30-Z-1011-12AInternal measuring instrument
2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:57 PMPage 128 © 2006 Mitchell Repair Information Company, LLC.
NumberDesignation
Engines
112.910/911
Engine 112.912
BE01.40-P-
1001-01FCylinder dia.Standard
Marking Xmm83.200...83.21583.200...83.215
Auxiliary stage
Marking mm83.250...83.26583.250...83.265
Repair sizemm83.450 to 83.46583.450 to 83.465
BE01.40-P-
1002-01FCylinder
diameter setting
for repair size
(+0.25)Pre-honingmm83.20083.200
Precision honingmm83.38083.380
Polishingmm83.43083.430
BE01.40-P-
1003-01FCylinder dia.
according to
machining phasePre-honingmm83.38083.380
Precision honingmm83.43083.430
Polishingmm83.450 to 83.46583.450 to 83.465
BE01.40-P-
1004-01FCylinder lengthmm129.5129.5
BE01.40-P-
1005-01FUndercutmm1212
BE01.40-P-
1006-01FStroke setting with 70 mm stone
length on 70th stroke scale of
machinemm130130
BE01.40-P-
1007-01FStone overrun at top and bottommm9.59.5
BE01.40-P-
1008-01FEngine speedPre-honingrpm125125
Precision honingrpm125125
Polishingrpm125125
Lappingrpm230230
BE01.40-P-
1009-01FFeedPre-honing44
Precision honing33
Polishing22
Lapping11.
BE01.40-P-
1010-01FStrokePre-honingrpm5757
Precision honingrpm5757
Polishingrpm5757
Lappingrpm8080
BE01.40-P-
1011-01FDisplayPre-honing%20 to 3020 to 30
Precision honing%20 to 3020 to 30
Polishing%20 to 3020 to 30
Lapping%20 to 3020 to 30
BE01.40-P-
1012-01FStroke setting with 70 mm felt
length on 70th stroke scale of
machinemm115115
2001 Mercedes-Benz ML320
1998-2005 ENGINE Complete engine - 163 Chassis
me
Saturday, October 02, 2010 3:17:58 PMPage 147 © 2006 Mitchell Repair Information Company, LLC.