ENGINE
196
SPECIFICATIONS
±GENERAL
Model 1MZ±FE
Type 6 cylinder V type, 4 cycle, gasoline
Bore and stroke 87.5 X 83 mm (3.44 X 3.27 in.)
Displacement 2995 cm
3
(182.7 cu.in.)
Valve clearance (engine cold)
Intake 0.15 ± 0.25 mm (0.006 ± 0.010 in.)
Exhaust 0.25 ± 0.35 mm (0.010 ± 0.014 in.)
Drive belt tension (with Borroughs drive belt tension 115 + 20 lb.
gauge No. BT±33±73F)
±LUBRICATION SYSTEM
Oil capacity
Drain and refill
with filter 4.7 L (5.0 qt., 4.2 Imp.qt.)
without filter 4.5 L (4.8 qt., 4.0 Imp.qt.)
Oil grade API SH, Energy±Conserving II multigrade engine oil or
ILSAC multigrade engine oil
Recommended oil viscosity (SAE):
ENGINE
202
Add oil O.K. Too full
4. Pull the dipstick out and look at the oil level on the end.
If it is between the full line ( ) and the low line ( ), it
is O.K.
If the oil level is below or only slightly above the low
level mark, add engine oil of the same type already in
the engine.
Remove the oil filler cap and add engine oil a little at a time,
checking the dipstick. The approximate quantity of oil
needed to fill between the low line and the full line on the
dipstick is indicated below for reference.
When the level reaches within the correct range, return the
filler cap and turn the cap clockwise until you hear a click.
Oil quantity. L (qt., Imp.qt.) 1.5 (1.6, 1.3)
NOTICE
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick once again after
adding oil.
