AIR CONDITIONING AND AUDIO
11 2(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1±6) and
hold it until a beep is head. This sets the station to the
button and the button number (1±6) on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the
same procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconeection or a blown
fuse.(c) Selecting a station
Your Lexus has an electronic tuning raido (ETR). Tune in the
desired station using one of the following methods.
Presetting tuning: Push the button (1±6) for the station you
want briefly. The button number (1±6) and station frequency
appear on the display.
Manual tuning: Push the ªTUNE SEEKº button briefly.
Each time you push the button, the radio will step up or down
to another frequency.
Seek tuning: Push the ªTUNE SEEKº button briefly and
hold it until you hear a beep. The radio will begin seeking up
or down for a station of the nearest frequency and will stop
on reception. Each time you push the button, the stations will
be searched out one after another.
AIR CONDITIONING AND AUDIO
122(h) If the player malfunctions
If ªWAITº appears on the display, audio signals of the disc
cannot be read or the system has trouble. Push the ªCDº
button once again.
If the player does not operate, check that the disc surface is
not soiled or damaged. If the disc is O.K., the following
cause is possible.
The temperature of the player's internal mechanism is
raised because of high external temperature. Remove the
magazine from the player to cool it.
If the player still does not operate, take it to your Lexus
dealer.
Car audio system operating hints
NOTICE
To ensure the correct audio system operation:
Be careful not to spill beverages over the audio
system.
Do not put anything other than a cassette tape or
CD magazine into the cassette tape slot or CD
changer.
Radio reception
Usually, the problem with radio reception does not mean
there is a problem with your radio ± it is just the normal result
of conditions outside the vehicle.
For example, nearby building s and terrain can interfere with
FM reception. Power lines or telephone wires can interfere
with AM signals. And of course, radio signals have a limited
range, and the farther you are from a station, the weaker its
signal will be. In addition, reception conditions change
constantly as your vehicle moves.
Here are some common reception problems that probably
do not indicate a problem with your radio.
FM
Fading and drifting stations±Generally, the effective
range of FM is about 40km (25 miles). Once outside this
range, you may notice and drifting, which increase with
distance from the distance from the radio transmitter. They
are often accompanied by distortion.
Multi±path±FM signals are reflective, making it possible for
two signals to reach your antenna at the same time. If this
happens, the signals will cancel each other out, causing a
momentary flutter or loss of reception.
Static and fluttering±These occur when the signals are
blocked by buildings, trees, or other large objects.
Increasing the basis level may reduce static and fluttering.
