1997 Lexus ES300 reset

AIR CONDITIONING AND AUDIO
107

Turning the system on and adjusting volume
(See page 108 for details.)
Stopping and ejecting a cassette tape
(See page 113 for details.)
Function buttons
1±6:Station selector buttons
(See page 112 for details.)
SCAN:Scan tuning
(See page 113 for details.)
P.SCAN:Preset scan tuning
(See page 113 for details.)
Display of functions in TAPE mode
 I
:Side change
(See page 114 for details.)
DOLBY NR
(See page 114 for details.)
:Rewinding
(See page 114 for details.)


:Fast forwarding
(See page 114 for details.)
RPT:Automatic repeat
(See page 119 for details.)
SKIP:Automatic skip of blank portions of tape
(See page 119 for details.)
SCAN:Scan selection
(See page 119 for details.)Display of functions in CD mode
:Reversing
(See page 121 for details.)


:Fast forwarding
(See page 121 for details.)
RPT:Automatic repeat
(See page 121 for details.)
RAND:Random access
(See page 121 for details.)
SCAN:Scan selection
(See page 120 for details.) Disc selection
(See page 119 for details.)
Mode selectors
(See page 108 for details.)
Cassette tape slot
(See page 113 for details.)
Tone and balance knobs
(See page 109 for details.)
Radio mode:Frequency tuning
(See pages 111 or 112 for details.)
TAPE mode:Direct access to a desired program
(See page 116 for details.)
CD mode:Direct access to a desired program
(See page 121 for details.)

AIR CONDITIONING AND AUDIO
11 2(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1±6) and
hold it until a beep is head. This sets the station to the
button and the button number (1±6) on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the
same procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconeection or a blown
fuse.(c) Selecting a station
Your Lexus has an electronic tuning raido (ETR). Tune in the
desired station using one of the following methods.
Presetting tuning: Push the button (1±6) for the station you
want briefly. The button number (1±6) and station frequency
appear on the display.
Manual tuning: Push the ªTUNE SEEKº button briefly.
Each time you push the button, the radio will step up or down
to another frequency.
Seek tuning: Push the ªTUNE SEEKº button briefly and
hold it until you hear a beep. The radio will begin seeking up
or down for a station of the nearest frequency and will stop
on reception. Each time you push the button, the stations will
be searched out one after another.

AIR CONDITIONING AND AUDIO
11 3
To scan all frequencies: Push the ªSCANº button. ªSCANº
appears on the display. The radio will find the next station
up the band, stay there for a few seconds, and then scan
again. To select a station, push the ªSCANº button a second
time.
To scan the preset station: Push the ªP.SCANº button.
ªP.SCANº appears on the display. The radio will tune in the
next preset station up the band, stay there for a few seconds,
and then move up to the next preset station. To select a
station, push the ªP.SCANº button a second time.
Cassette tape player operation
(a) Playing a cassette tape
When you insert a cassette tape, the exposed tape
should be to the right.
The player will automatically start when you insert a cassette
tape. At this time, ªTAPEº appears on the display.
If a metal or chrome equivalent cassette tape is put in the
cassette player, the player will automatically adapt to it and
ªMETALº appears on the display.
To stop or eject the cassette tape, push the ªEJECTº button.
Auto±reverse feature: After the cassette player reaches
the end of the tape, it automatically reverses and begins to
play the other side, regardless of whether the cassette was
playing or fast forwarding.

AIR CONDITIONING AND AUDIO
121 (f) Selecting a desired track
ªTRACKº button: Use for direct access to a desired track.
Push either side of the ªTRACKº button and hold it until the
desired track number appears on the display. As you release
the button, the player will start playing the selected track
from the beginning.
ªFast forwardº button.
Push the ª

º button and hold it to fast forward the disc.
When you release the button, the compact disc player will
resume playing from that position.
ªReverseº button.
Push the ªº button and hold it to reverse the disc. When
you release the button, the compact disc player will resume
playing.(g) Other compact disc player functionsªRPTº button: Use it for automatic repeat of the track you
are currently listening to.
Push the button while the track is playing. When the track
is finished, the player will automatically go back to the
beginning of the track and play the track again. To cancel it,
push the button once again.
ªRANDº button: Use it for automatic track selection and
play by the system.
When the button is pushed, the system selects a track in the
discs which are set and plays it. To cancel it, push the button
once again.
When a track is skipped or the system is inoperative, push
the button to reset.