AIR CONDITIONING AND AUDIO
108
Using your audio system: some basics
This selection describes some of the basic features of the
Lexus audio system. Some information may not pertain to
your system.
Your audio system works when the ignition key is in the
ªACCº or ªON º position.
NOTICE
To prevent the battery from being discharged, do
not leave the car audio on longer than necessary
when the engine is not running.
(a) Turning the system on and off
Push this knob to turn the audio system on and off.
Turn this knob to adjust the volume.
The system turns on in the last mode used.
Push ªAMº, ªFM1/2º, ªTAPEº or ªCDº to turn on that
mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or disc is not set, the cassette player or compact
disc player does not turn on.
You can turn off the cassette player by ejecting the cassette
tape. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape. If another function was previously playing, it will come
on again.
AIR CONDITIONING AND AUDIO
11 2(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1±6) and
hold it until a beep is head. This sets the station to the
button and the button number (1±6) on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the
same procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconeection or a blown
fuse.(c) Selecting a station
Your Lexus has an electronic tuning raido (ETR). Tune in the
desired station using one of the following methods.
Presetting tuning: Push the button (1±6) for the station you
want briefly. The button number (1±6) and station frequency
appear on the display.
Manual tuning: Push the ªTUNE SEEKº button briefly.
Each time you push the button, the radio will step up or down
to another frequency.
Seek tuning: Push the ªTUNE SEEKº button briefly and
hold it until you hear a beep. The radio will begin seeking up
or down for a station of the nearest frequency and will stop
on reception. Each time you push the button, the stations will
be searched out one after another.
