Some  driving  conditions  or  climates  may  cause a brake 
squeal  when  the  brakes  are  first  applied  or  lightly  applied. 
This does  not mean something  is  wrong  with  your  brakes. 
Properly  torqued  wheel  nuts  are necessary  to  help 
prevent  brake  pulsation. When  tires  are  rotated,  inspect 
brake  pads  for wear  and  evenly  torque wheel  nuts  in  the 
proper  sequence 
to GM specifications. 
If  you  have  rear  drum  brakes,  they  don’t  have  wear 
indicators,  but if  you  ever hear 
a rear  brake  rubbing 
noise,  have  the rear  brake linings  inspected.  Also,  the 
rear  brake  drums  should  be removed  and  inspected  each 
time  the  tires  are removed  for rotation  or changing. 
When  you  have  the front  brake  pads  replaced,  have 
the 
rear brakes  inspected,  too. 
Brake  linings  should always  be replaced  as  complete 
axle  sets. 
See “Brake  System  Inspection”  in  Section 7 of  this  manual 
under  Part 
C “Periodic  Maintenance  Inspections.” 
Brake  Pedal  Travel 
See  your  dealer if the  brake  pedal  does  not return  to 
normal  height, or 
if there  is a rapid  increase in pedal 
travel.  This could  be a sign 
of brake  trouble. 
Brake  Adjustment 
Every  time  you  make  a brake  stop, your  disc  brakes 
adjust  for wear. 
If  your  brake  pedal  goes  down  farther than  normal,  your 
rear  drum  brakes  may  need  adjustment. Adjust  them  by 
backing  up and  firmly  applying  the brakes  a few times. 
Replacing  Brake  System  Parts 
The  braking  system  on  a modern  vehicle  is  complex. 
Its  many  parts  have  to  be  of top  quality  and  work  well 
together 
if the  vehicle is to  have  really  good  braking. 
Your  vehicle  was  designed  and  tested  with  top-quality 
GM brake  parts.  When  you  replace  parts of your  braking 
system 
-- for  example, when your  brake  linings wear 
down  and  you  have  to  have  new  ones  put  in -- be sure 
you  get  new  approved 
GM replacement  parts. If you 
don’t,  your  brakes  may no  longer.  work  properly.  For 
example,  if someone  puts 
in brake  linings  that  are  wrong 
for  your  vehicle, 
the balance  between  your  front  and 
rear  brakes  can  change 
-- for  the  worse.  The braking 
performance  you’ve come  to  expect  can  change  in  many 
other  ways 
if someone  puts  in  the  wrong  replacement 
brake  parts. 
ProCarManuals.com