1997 FORD WINDSTAR jump cable

Roadside Emergencies
275
[ER14300(ALL)01/96]
24 pica art:0050022-B
Jumper Cable Placement (3.8L)
File:10wners.ex
Update:Tue Jul 9 12:14:55 1996

276
[ER14400(ALL)01/96]
24 pica art:0050259-B
Jumper Cable Placement (3.0L)
File:10wners.ex
Update:Tue Jul 9 12:14:55 1996

Roadside Emergencies
277
[ER14500(ALL)01/96]
After you connect the jumper cables to the batteries:
[ER14600(ALL)04/96]1.
Make sure that the jumper cables are not in the way of
moving engine parts, then start the vehicle that has the
booster battery. Run the engine at a moderate speed.
[ER14700(ALL)01/96]2.
Let the dead battery charge for a few minutes and then start
the vehicle that has the dead battery. If the starter does not
crank, check for good, solid jumper cable clamp attachments.
It may take a couple of tries before your vehicle starts. If
your vehicle does not start after several attempts, you may
have a different mechanical problem.
[ER14800(ALL)04/96]3.
When both vehicles are running, let them idle for a few
minutes to charge the dead battery.
% [ER14900(ALL)01/96]
Take the jumper cables off in the following order:
[ER15000(ALL)01/96]1.
Remove the negative (s) end of the jumper cable from the
metallic surface in the engine compartment of the vehicle
that needed a jump-start.
[ER15100(ALL)04/96]2.
Remove the other end of the negative (s) cable from the
booster battery.
*
[ER15200(ALL)02/96]3.
Remove the positive (+) cable from the booster battery.
[ER15300(ALL)04/96]4.
Remove the other end of the positive (+) cable from the
vehicle that needed a jump-start.
% [ER15400(ALL)01/96]
After your vehicle is started, let it idle for a while to let the
engine ªrelearnº its idle conditions and drive it around for a
little while with all electrical accessories turned off, to let the
battery recharge.You may need to use a battery charger to
fully recharge the battery.
File:10wners.ex
Update:Tue Jul 9 12:14:55 1996

378
Hood (continued)
release lever.................... 281
working under the hood............... 279
Horn......................... 108
Hoses, checking.................... 296
I
Identification Number, Vehicle (VIN).......... 343
Idle, relearning.................... 277
Ignition
positions of the ignition............... 100
removing the key.................. 101
Indicator lamp module.................. 37
Indicator lights and chimes (see Lights).......... 7
Infant seats (see Safety seats)............186, 200
Instrument cluster
electronic....................... 25
Instrument panel
cleaning..................... 81,331
lighting up panel and interior............. 98
registers....................... 82
Integrated child seat (see Built-in child seat)....... 188
Interval wipers.................... 104
J
Jack
operation...................... 263
positioning..................... 263
Jump-starting your vehicle
attaching cables................... 274
disconnecting cables................. 277
File:wnixs.ex
Update:Thu Aug 1 08:57:39 1996