1997 FORD RANGER lock

Instrumentation
11
*
[IS03800(R)01/96]
Anti-lock Brake Warning Light
[IS03925(R)01/96]
To check the ABS brake warning light, turn the ignition key to
ON. The ABS brake warning light should glow momentarily.
[IS03985(R)01/96]
NOTE: If the ABS brake warning light does not glow
momentarily, have your vehicle's electrical system
checked immediately. If the light begins to flash in a
repeatable flash sequence, check the anti-lock system
continuous power fuse and brakelamps for proper
operation.
[IS04050(R)01/96]
6 pica art:0021146-A
Anti-lock warning light symbol
*
[IS04100(R)03/96]
RWARNING
If the anti-lock brake system warning light remains on or
comes on while driving, have the braking system checked
by a qualified service technician as soon as possible.
*
[IS04110(R)03/96]
NOTE: If a fault occurs in the anti-lock system, and the brake
warning light is not lit, the anti-lock system is
disabled but normal brake function remains
operational.
%*
[IS04150(R)03/96]
Safety Belt Warning Light and Chime
[IS04301(R)04/96]
The safety belt warning light/chime reminds you to fasten your
safety belt. One of the following will take place:
[IS04325(R)05/96]
n
If the safety belt is not buckled before the key is turned to
the ON position, the light comes on for one to two minutes
and the chime sounds for 4 to 8 seconds.
File:03unisr.ex
Update:Thu Mar 20 09:21:14 1997

Instrumentation
17
[IS07735(R)05/96]
6 pica art:0090108-A
Speed control light
[IS07740(R)05/96]
Anti-Theft Light (If equipped)
[IS07750(R)05/96]
The THEFT light flashes on and off when the ignition switch is
OFF and any door is opened. As soon as you lock the doors,
the light illuminates steadily. Within 30 seconds of closing all
the doors, the light flashes intermittently (every 2 seconds). This
indicates that the anti-theft system is armed. Refer toAnti-Theft
Systemin the Index for additional information.
[IS07760(R)05/96]
6 pica art:0021151-B
Anti-theft indicator light
File:03unisr.ex
Update:Thu Mar 20 09:21:14 1997

Instrumentation
21
[IS09200(R)01/96]
7-1/2 pica art:0020540-E
Engine oil pressure gauge Ð mechanical cluster with tachometer
%*
[IS09300(R)05/96]
High Beam Light
*
[IS09350(R)01/96]
This light comes on when the headlamps are turned on high
beam or when you flash the lights. If your vehicle is equipped
with daytime running lights and you have your headlamps on,
your high beam light will not illuminate when you flash the
lights.
[IS09400(R)01/96]
6 pica art:0021266-A
High beam indicator light symbol
%*
[IS09500(R)03/96]
ªHeadlamps Onº Alert Chime
[IS09510(R)01/96]
This chime sounds if you open the driver's door while the
headlamps or parking lamps are on, and the key is removed
from the ignition.
%*
[IS09550(R)03/96]
Ignition Key Buzzer or Chime
*
[IS09570(R)05/96]
The buzzer or chime will sound if you open the driver's door
while the key is in the ignition and in the OFF, LOCK, or
ACCESSORY position. Never leave your vehicle unattended
with the key in the ignition.
File:03unisr.ex
Update:Thu Mar 20 09:21:14 1997

28
[AS29217(R)05/96]
Stereo Cassette with CD DJ Compatibility
*
[AS29220(R)03/96]
Using the Controls on Your New Radio
*
[AS29225(R)03/96]
How to turn the radio on and off
*
[AS29230(R)01/95]
Press the ªVOL/PUSHº knob to turn the radio on. Press again
to turn it off.
*
[AS29235(R)03/96]
How to adjust the volume
[AS29240(R)06/95]
Turn the ªVOL/PUSHº knob clockwise to increase the volume
and counterclockwise to decrease the volume. Bars illuminate in
the display to show relative volume level.
*
[AS29245(R)02/96]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
*
[AS29250(R)03/96]
Selecting the AM or FM frequency band
*
[AS29255(R)02/95]
Push the ªAM/FMº button to select the desired frequency band
or to stop/store cassette tape (when in cassette mode). Pushing
the button more than once will alternate between AM, FM1 and
FM2. These functions are used with the station memory buttons
described underHow to tune radio stations.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

34
*
[AS29570(R)04/95]
Push thekbutton to activate Dolby B Noise Reduction. Push
again to deactivate.
*
[AS29650(R)05/96]
Tips on Caring for the Cassette Player and Tapes
*
[AS29655(R)08/95]
In order to keep your cassette tape player performing the way it
was meant to, read and follow these simple precautions:
*
[AS29660(R)05/96]
n
Using a Ford or equivalent cassette cleaning cartridge to
clean the tape player head after 10-12 hours of play will help
maintain the best playback sound and proper tape operation.
*
[AS29665(R)08/95]
n
Only cassettes that are 90 minutes long or less should be
used. Tapes longer than 90 minutes are thinner and subject
to breakage or may jam the tape player mechanism.
*
[AS29670(R)08/95]
n
Protect cassettes from exposure to direct sunlight, high
humidity and extreme heat or cold. If they are exposed to
extreme conditions, allow them to reach a moderate
temperature before playing.
*
[AS29675(R)08/95]
n
If a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
*
[AS29680(R)08/95]
n
Loose labels on cassette tapes can become lodged in the
mechanism. Remove any loose label material before inserting
cassette.
*
[AS29685(R)08/95]
n
Do not leave a tape in the cassette tape player. High heat in
the vehicle can cause the cassette to warp.
%*
[AS29690(R)05/96]
Clock Operation
*
[AS29695(R)05/96]
How to view the clock mode
[AS29705(R)05/96]
Press the ªCLKº button to display time. The time will continue
to be displayed until a radio or tape function is chosen. After
approximately 10 seconds, the time will again appear in the
display. To display radio or tape information only, press the
ªCLKº button a second time.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

Electronic Sound Systems
35
[AS29710(R)09/95]
NOTE: With the ignition off, the clock will display for
approximately 5 seconds once the ªCLKº button is
depressed and released.
*
[AS29715(R)05/96]
How to set the clock
*
[AS29720(R)05/96]1.
Turn the radio on.
[AS29725(R)05/96]2.
Press and hold the ªCLKº button, press the right (
a) side of
the ªSEEKº button to increase hours. Press the left (
b) side
of the button to decrease hours. Press the right (
a) side of
the ªTUNEº button to increase minutes. Press the left (
b)
side of the button to decrease minutes.
*
[AS29730(R)05/96]
NOTE: The clock displays 12-hour time with no AM/PM
indications.
[AS29735(R)09/94]
Ford 6-CD Changer (If equipped)
[AS29745(R)03/95]
The Ford Ranger (Regular Cab) 6-CD Changer is mounted
behind the driver's seat. The Ford Ranger (SuperCab) 6-CD
Changer is mounted on the floor near the center of the rear cab
wall. Both changers are controlled with buttons on the Audio
System.
[AS29750(R)10/94]
Unit Loading Instructions
[AS29755(R)06/95]1.
Open Compact Disc Changer unit by sliding door rearward
(Figure 1).
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

46
[AS29969(R)05/96]
Electronic Search, Search Cassette Radio,
and Search Single Disc CD Radio
*
[AS29970(R)03/96]
Using the Controls on Your New Radio
*
[AS29972(R)03/96]
How to turn the radio on and off
*
[AS29973(R)03/96]
Press the ªVOL/PUSH ONº knob to turn the radio on. Press
again to turn it off.
*
[AS29975(R)03/96]
How to adjust the volume
[AS29980(R)06/95]
Turn the ªVOL/PUSH ONº knob clockwise to increase the
volume and counterclockwise to decrease the volume. Bars
illuminate in the display to show relative volume level.
*
[AS29985(R)02/96]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
*
[AS29990(R)03/96]
Selecting the AM or FM frequency band
[AS29995(R)10/94]
Push the ªAMº/FMª button to select the desired frequency
band or to stop/store cassette tape (when in cassette mode).
These functions are used with the station memory buttons
described underHow to tune radio stations.
%*
[AS30000(R)03/96]
How to tune radio stations
[AS30005(R)04/95]
There are four ways for you to tune in a particular station. You
can manually locate the station using the ºTUNEª button,
ºSEEKª button, ºSCANª button, or select the station by using
the memory buttons, which you can set to any desired
frequency. These four methods are described below.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

Electronic Sound Systems
55
%*
[AS30670(R)05/96]
Clock Operation
*
[AS30680(R)05/96]
How to view the clock mode
[AS30690(R)05/96]
Press the ºCLKª button to display time. The time will continue
to be displayed until a radio or tape function is chosen. After
approximately 10 seconds, the time will again appear in the
display. To display radio or tape information only, press the
ºCLKª button a second time.
[AS30700(R)05/96]
NOTE: The clock can be displayed or set whether the ignition
is on or off.
*
[AS30710(R)05/96]
How to set the clock
*
[AS30720(R)05/96]1.
Turn the radio on.
[AS30730(R)05/96]2.
Press and hold the ºCLKª button, press the right (
a) side of
the ºSEEKª button to increase hours. Press the left (
b) side
of the button to decrease hours. Press the right (
a) side of
the ºTUNEª button to increase minutes. Press the left (
b)
side of the button to decrease minutes.
*
[AS30740(R)05/96]
NOTE: The clock displays 12-hour time with no AM/PM
indications.
%*
[AS30750(R)05/96]
Common Radio Reception Conditions
*
[AS30760(R)05/96]
Several conditions prevent FM reception from being completely
clear and noise-free, such as the following:
*
[AS30770(R)05/96]1.
Distance/Strength
*
[AS30780(R)05/96]
The strength of the FM signal is directly related to the distance
the signal must travel. The listenable range of an average FM
signal is approximately 25 miles (40 kilometers). Beyond this
distance, the radio is operating in a fringe area and the signal
becomes weaker.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997