1997 FORD F150 display

Audio systems 2
Controls and features 6
Display 22
Care and cleaning 24
Radio frequency information 26
Warranties and service 27
Index 28
Table of Contents
1

Clock
Press the CLK control to display
the time on the audio system
display.
Time is displayed:
²until an audio function control is
pressed.
²approximately ten seconds after
each audio system change.
²when the audio system is off
and the ignition is ON.
To remove the clock display, press
the CLK control again.
Setting the clock
To set the hour, hold the CLK
control and press:
to increase hour and
to decrease hours.
AUTO
SET CLKCLK
AUTO
SET CLK
SEEK
TUNE
CLK
Controls and features
19

DISPLAY
The display screen gives
information on the status of the
audio system.
Display Information
AM, FM1, FM2 Indicates current radio frequency band.
87.9 to 107.9/530 to 1610 Indicates currently playing radio station
STIndicates stereo operation
Illuminated barsIndicates volume, relative level of bass
and treble and relative levels of speaker
balance and fade.
TAPE Indicates tape is playing
SC Indicates tape is scanning
AUTO Indicates autoset function activation
AUTO OFF Indicates autoset function is off.
NO TAPEIndicates no tape in player when tape
select button is pushed.
Indicates DolbyTNoise Reduction
activation
Indicates tape play
1 or 2 Indicates side of tape playing
Indicates tape is in the tape deck.
CD-##Indicates CD number playing (e.g.,
TR-01, TR-02, etc.)
TR-##Indicates CD track number playing (e.g.,
TR-01, TR-02, etc.)
##-##Indicates CD number and track number
(e.g., 03-10)
CIndicates CD compression adjust
activation
SHF ##-##Indicates shuffle feature activation and
disc and track number playing
FM 1ST
Display
22

Display Information
NO CDIndicates empty changer, no disc in
magazine, mechanical error, unreadable
disc, focus error, or system shutdown
due to high heat.
NO DJIndicates CD changer not connected or
not communicating.
Display
23

thunderstorms. Moving away
from an interfering structure
(out of its ªshadowº) returns
your reception to normal.
²Station overload. Weak stations
are sometimes captured by
stronger stations when you pass
a broadcast tower. A stronger
station may temporarily
overtake a weaker station and
play while the weak station
frequency is displayed.
The audio system automatically
switches to single channel
reception if it will improve the
reception of a station normally
received in stereo.
WARRANTIES AND SERVICE
Refer to the ªWarranty Guideº for
audio system warranty information.
If service is necessary, see your
dealer or a qualified technician.
Warranties and service
27

AM/FM select ................................8
Audio power ..................................6
Bass adjust ....................................9
CD select .....................................14
Cleaning your vehicle
CD player and discs .................24
Clock ............................................19
Compact disc changer
care ............................................25
operation ...................................20
troubleshooting .........................24
Compression adjust ....................16
Display .........................................22
Dolby
noise reduction .........................16
Fast forward function .................15Radio frequency
information ................................26
reception ...................................26
Rewind function ..........................14
Scan function ..............................12
Seek function ..............................10
Speaker balance adjust ................9
Stations
selecting ......................................6
Tape direction select ..................16
Tape select ..................................13
Treble adjust .................................9
Tune adjust .................................11
Warranties
radio ...........................................27
Index
28