1997 FORD F SERIES MOTORHOME AND COMMERCIAL CHASSIS oil additives

8
%*
[II06000( ALL)01/96]
Breaking Your Vehicle In
*
[II06100( ALL)01/96]
Your new vehicle goes through an adjustment or
break-in period during the first 1,000 miles
(1,600 km) that you drive it. During the break-in
period, you need to pay careful attention to how
you drive your vehicle.
%*
[II06300( ALL)01/96]
q
Avoid sudden stops.Because your vehicle
has new brake linings, you should take these
steps:
*
[II06400( ALL)01/96]
Ð Watch traffic carefully so that you can
anticipate when to stop.
*
[II06500( ALL)01/96]
Ð Begin braking well in advance.
*
[II06600( ALL)01/96]
Ð Apply the brakes gradually.
*
[II06700( ALL)01/96]
The break-in period for new brake linings
lasts for 100 miles (160 km) of city driving or
1,000 miles (1,600 km) of highway driving.
*
[II06750( ALL)01/96]
q
Wheel lug nuts must be retightened to proper
torque specifications at 500 miles/800 km of
new vehicle operation. Proper torque
specifications are provided in this guide. Also
retighten to proper torque specification at 500
miles/800 km after any wheel change or any
other time the wheel lug nuts have been
loosened.
[II06900( M)01/96]
q
Use only the type of engine oil that Ford
recommends.Don't add anti-friction
compounds or special break-in oils during the
first few thousand miles of operation. These
additives may prevent piston ring seating.
File:02ltiim.ex
Update:Fri Dec 13 11:16:51 1996

101
%*
[MC05750( ALL)01/96]
Engine Oil Recommendations
*
[MC05775( ALL)01/96]
We recommend using Motorcraft oil or an
equivalent oil meeting Ford Specification
WSS-M2C153-F and displaying the American
Petroleum Institute CERTIFICATION MARK on
the front of the container.
*
[MC05800( ALL)01/96]
one third page art:0060020-D
The API Certification Mark
*
[MC05900( ALL)01/96]
Neveruse:
*
[MC06000( ALL)01/96]
q
ªNon-Detergentº oils
*
[MC06100( ALL)01/96]
q
Oils labeled API SA, SB, SC, SD, SE, SF or SG
%*
[MC06200( ALL)01/96]
q
Additional engine oil additives, oil treatments
or engine treatments
[MC06800( ALL)01/96]
Engine oils with anSAE 10W-30viscosity are
PREFERREDfor your vehicle which provide the
best engine protection for all climates down to
S5ÊF (S20ÊC). SAE5W-30 engine oils may also
be used down toS15ÊF (S25ÊC).
%*
[MC06900( ALL)01/96]
Synthetic engine oils which are CERTIFIED and
of the preferred viscosity may be used in your
engine. The engine oil and oil filter must still be
changed according to the maintenance schedule.
File:11ltmcm.ex
Update:Fri Dec 13 11:24:54 1996

Index 203
Index
A
Accessory position on the ignition . . . 23±24
Additives, engine oil.......... 101
Air cleaner filter, specifications...... 147
Alcohol, in fuel............. 130
Antifreeze (see Engine coolant)...... 107
Anti-lock brake system (ABS)
description............... 45
see also Brake............. 45
Appeals (see Dispute settlement board) . . 159
Assistance (see Customer assistance) . 155±156
Autolamp system (see Headlamps)..... 22
Automatic transmission
driving an automatic overdrive . . . 50, 53
fluid, adding............. 118
fluid, checking............ 117
fluid, refill capacities......... 148
fluid, specification.......... 149
Axle
lubricant specifications........ 149
refill capacities............ 148
B
Backing up................ 53
Basic vehicle warranty........... 4
Battery................. 119
acid, treating emergencies...... 93,120
charging system warning light...... 14
disconnecting.............. 96
how to service............ 119
jumping a disabled battery....... 92
maintenance-free........... 119
File:ltixm.ex
Update:Fri Dec 13 11:25:54 1996