1997 FORD F SERIES MOTORHOME AND COMMERCIAL CHASSIS display

17 %
*
[IS08700( ALL)01/96]
High Beam Light
*
[IS08800( ALL)01/96]
This light comes on when the headlamps are
turned on high beam or when you flash the
lights.
*
[IS08900( ALL)01/96]
one inch art:0020537-B
High beam indicator light
%*
[IS09200( ALL)01/96]
Fuel Gauge
*
[IS09300( ALL)01/96]
The fuel gauge displays approximately how
much fuel is in the fuel tank only when the
ignition switch is ON.
*
[IS09400( M)01/96]
For a proper fuel gauge indication after adding
fuel, the ignition switch should be in the OFF
position while the vehicle is being refueled.
*
[IS09500( ALL)01/96]
The fuel gauge indicator may vary slightly when
the vehicle is in motion.
*
[IS09600( ALL)01/96]
With ignition switch OFF, the fuel gauge
indicator may drift from the ignition switch ON
position.
[IS09800( E M)01/96]
one inch art:0020064-C
Fuel gauge
File:03ltism.ex
Update:Fri Dec 13 11:17:22 1996

20 %
*
[IS11900( ALL)01/96]
Odometer/Trip Odometer
*
[IS12000( ALL)01/96]
The Liquid Crystal Display (LCD) odometer is a
combination trip odometer and total odometer.
The total odometer is normally displayed. To see
the trip odometer, press and release the SELECT
button on the upper right side of the
speedometer. To zero out the trip odometer,
press and release the RESET button on the
upper left side of the speedometer while the trip
odometer is displayed. If the trip odometer is
displayed, press and release the SELECT button
to return the display to the total odometer value.
File:03ltism.ex
Update:Fri Dec 13 11:17:22 1996

101
%*
[MC05750( ALL)01/96]
Engine Oil Recommendations
*
[MC05775( ALL)01/96]
We recommend using Motorcraft oil or an
equivalent oil meeting Ford Specification
WSS-M2C153-F and displaying the American
Petroleum Institute CERTIFICATION MARK on
the front of the container.
*
[MC05800( ALL)01/96]
one third page art:0060020-D
The API Certification Mark
*
[MC05900( ALL)01/96]
Neveruse:
*
[MC06000( ALL)01/96]
q
ªNon-Detergentº oils
*
[MC06100( ALL)01/96]
q
Oils labeled API SA, SB, SC, SD, SE, SF or SG
%*
[MC06200( ALL)01/96]
q
Additional engine oil additives, oil treatments
or engine treatments
[MC06800( ALL)01/96]
Engine oils with anSAE 10W-30viscosity are
PREFERREDfor your vehicle which provide the
best engine protection for all climates down to
S5ÊF (S20ÊC). SAE5W-30 engine oils may also
be used down toS15ÊF (S25ÊC).
%*
[MC06900( ALL)01/96]
Synthetic engine oils which are CERTIFIED and
of the preferred viscosity may be used in your
engine. The engine oil and oil filter must still be
changed according to the maintenance schedule.
File:11ltmcm.ex
Update:Fri Dec 13 11:24:54 1996