1997 FORD ASPIRE alternator

11 %
*
[IS03200(ALL)01/96]
Charging System Light
*
[IS03300(ALL)04/96]
This light indicates that your battery is not being
charged and that you need to have the electrical
system checked.
[IS03400(ALL)01/96]
one inch art:0030172-C
Charging system light
*
[IS03500(ALL)03/96]
This light illuminates every time you turn the
ignition to the ON or START position (engine
off). The light should go off when the engine
starts and the alternator begins to charge.
*
[IS03550(ALL)03/96]
If the light stays on or illuminates when the
engine is running, have the electrical system
checked as soon as possible.
%*
[IS03615(ALL)01/96]
Engine Oil Pressure Warning Light
[IS03715(ALL)04/96]
This light indicates low oil pressure, not low oil
level. However, if the engine's oil level is low, it
could affect the oil pressure. This light
illuminates every time the ignition key is turned
to ON or START, but it normally turns off when
the engine starts.
[IS03800(ALL)01/96]
one inch art:0030173-C
Engine oil pressure light
File:03icisf.ex
Update:Tue Mar 4 08:51:24 1997

194
*
[MC72000(ALL)01/96]
Cleaning the Engine
*
[MC72100(ALL)01/96]
A clean engine is more efficient because the
engine is able to cool properly. A build up of
grease and dirt acts as an insulator, keeping the
engine warmer than normal.
*
[MC72200(ALL)01/96]
q
Extreme care must be used if a power washer
is used to clean the engine. The high pressure
fluid could penetrate sealed parts and
assemblies causing damage or malfunctions.
*
[MC72300(ALL)04/96]
q
In order to avoid possible cracking of the
engine block or fuel injection pump, do not
spray a hot engine or injection pump with
cold water.
*
[MC72400(ALL)04/96]
q
The alternator, distributor and air intake must
be covered. Covering these components will
help prevent water damage.
*
[MC72500(ALL)01/96]
Never wash or rinse the engine while it is
running. Water getting into the engine may
cause internal damage.
%*
[MC73000(ALL)03/96]
Cleaning the Seats
*
[MC73100(ALL)01/96]
Vinyl
*
[MC73200(ALL)01/96]
Wipe the surface with a damp, soft cloth, then
dry and buff with a dry, soft cloth.
%*
[MC73300(ALL)05/96]
Fabric
*
[MC73400(ALL)05/96]
Remove dust and loose dirt with a whisk broom
or a vacuum cleaner. Remove fresh spots
immediately. Follow the directions that come
with the cleaner.
*
[MC73500(ALL)05/96]
NOTE: Before using any cleaner, test it on a
small, hidden area of fabric. If the
fabric's color or texture is adversely
affected by a particular cleaner, do not
use it.
File:11icmcf.ex
Update:Tue Mar 4 08:57:16 1997