1997 BUICK CENTURY check engine

[x] Cancel search: check engine

Page 193 of 406

BUICK CENTURY 1997  Owners Manual Avoid needless  heavy bralung.  Some  people  drive  in 
spurts 
-- heavy  acceleration  followed  by heavy 
braking 
-- rather  than  keeping pace  with  traffic. This  is  a 
mistake.  Your brakes

Page 207 of 406

BUICK CENTURY 1997  Owners Manual The exit speed is usually posted. 
Reduce  your speed  according to your speedometer, 
not 
to your  sense  of motion. After  driving  for any distance 
at  higher  speeds, 
you may  tend to think  yo

Page 208 of 406

BUICK CENTURY 1997  Owners Manual Highway  Hypnosis 
Is there  actually  such a condition  as “highway  hypnosis”? 
Or  is  it  just plain  falling  asleep  at  the  wheel?  Call  it 
highway  hypnosis,  lack 
of awareness,  or wh

Page 209 of 406

BUICK CENTURY 1997  Owners Manual If you drive  regularly  in steep  country,  or if you’re 
planning  to visit  there,  here are  some  tips  that can make 
your trips  safer and more  enjoyable. 
0 Keep your  vehicle in good  shap

Page 213 of 406

BUICK CENTURY 1997  Owners Manual Tie a red  cloth  to  your vehicle  to  alert  police that 
you’ve been  stopped by the  snow. 
Put on extra  clothing  or  wrap a blanket around you. 
If  you  have  no blankets  or  extra  clothin

Page 222 of 406

BUICK CENTURY 1997  Owners Manual Turn Signals  When  Towing a Trailer 
When you tow a trailer, your  vehicle may need a 
different  turn signal  flasher  and/or  extra  wiring. Check 
with your Buick dealer.  The  green  arrows on yo

Page 223 of 406

BUICK CENTURY 1997  Owners Manual When You Are  Ready  to  Leave  After 
Parking  on  a  Hill 
1. Apply your  regular  brakes  and hold the pedal down 
while  you: 
Start  your engine; 
Shift  into a  gear;  and 
Release  the  parking

Page 232 of 406

BUICK CENTURY 1997  Owners Manual 6. Check that the  jumper  cables  don’t have loose  or 
missing insulation. 
If they  do, you  could  get  a shock. 
The  vehicles could  be damaged  too. 
Before  you connect  the  cables,  here a